VMP TT-Series User Manual

Instruction Sheet For:

TT Series

Step 1

Take out your turntable and anti skid circles.

Step 2

Attach the anti skid circles to the rotation circle so they are placed at the end of the spokes on the
wide part of the outer ring.

Step 3

Place the television on top of the turntable. (Television not included) To turn the television, simply grasp
the television with both hands and swivel the television.

Step 4

If you are having diffi culty turning the turntable please remove television and fl ip the turntable over.
Use a Philips head screwdriver to give the screw in the bottom of the unit a quarter turn counterclock­wise to loosen it. Repeat if the turntable is still too tight.

Enjoy Your Mount!

WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will
safely support the combined weight of all attached equipment and hardware. Video Mount Products
will not be held liable for the improper use or installation of its products.

For more information, please contact us at:

345 Log Canoe Circle, Stevensville, Maryland 21666

Toll Free: 877.281.2169 Phone: [phone] Fax: [phone]

www.videomount.com