QTY.
2
2
1
2
2
4
2
6
2
1
4
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
4
4
DESCRIPTION
ITEM
Wall Plate
1
NO.
Pivot Bracket
Screen Mount Bracket
2
3
25*T1.6
19*T1.6
12*
9.2*
M8*P1.25*L20
Socket Screw
18UNC*L2.75"
Carriage Screw 5/16" -
Washer
Nylon Nut 5/16" - 18UNC
4
5
7
6
2
M5 Allen Key
Washer
Cross Screw M3*P0.7*L12
8
9
10
Cross Screw
M8*P1.25*L16.5
Cross Screw M4*P0.7*L12
Cross Screw M5*P0.8*L12
Cross Screw M6*P1.0*L12
11
12
13
1
Cross Screw M4*P0.7*L30
Cross Screw M5*P0.8*L30
14
15
16
Lock Washer M4
Lock Washer M5
Cross Screw M6*P1.0*L35
Cross Screw M8*P1.25*L40
17
18
19
20
18*T2.0
5.5*
Spacer M6
Spacer M8
Lock Washer M6
Lock Washer M8
Washer
21
22
23
Magnetic Level
Lag Screw 5/16"*L2.5"
24
25
26
27
19*T1.6
8.3*
Washer
28
7
LCD-MID-FT
10
28
27
6
24
4
26
5
9
25
22 23
2120191817
8
3
11
12
13
14
15
16
Step 4: Adjusting the tilt tension
before placing the screen on
the wall
Step 4
Adjust the tilt tension by tightening the socket head screws with
the M5 Allen Key so they are fairly tight. Note: You may have
to adjust the tilt tension once the fl at screen is on the wall so do not
tighten as hard as you can because it will make further adjustment
on the wall much more diffi cult.
10
4
Step 5
Use the hooks on the pivot bracket to hook on the top rail of the
wall plate . Use the M5 screws to secure the TV to the wall
plate and to secure its horizontal position.
1
1
2
9
Step 6
If you need to adjust the tilt tension:
Tilt down the fl at screen as far as it will go. Note: This is done to give
you room to work with behind the fl at screen. Take the M5 Allen Key
and tighten down the socket screws until you have
10
achieved the desired tilt tension and readjust the tilt to the desired
angle.
4
Step 5: Securing the pivot
brackets to the wall plate
Please verify that all nuts and screws are securely tightened.
Enjoy Your Mount!
WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight
of all attached equipment and hardware. Video Mount Products will
not be held liable for the improper use or installation of its products.
Step 6: Adjusting the tilt tension
after placing the screen
on the wall
VIDEO MOUNT PRODUCTS
Loading...