VM Audio EXMS510 Quick Installation Manual

5. OperationSetup (option 2)

6. Troubleshooting

Caution & Warning

5.1 Speaker System

5.1 Speaker System

DVD AUDIO OUTPUT

FL

FR SW

SL

SR

CEN

DVD / Surround

Processor

R

FR FRSR SR

SW CEN

SL

AUX AUDIO INPUT

L

CEN

DVD AUDIO INPUT AUDIO OUTPUT

ON

OFF

POWER SWITCH

SLFL FL

AC IN

1. Use the Stereo RCA Cables (included) to plug into
your DVD or Surround Processor Outputs.

2. Plug the other end of the cable into the Input Section
of the Subwoofer.

Use the supplied cables to connect to audio source (refer to
Setup Section).

• Turn on the Speaker System.

• Set the Volume for each Speaker to the zero position to start.

• Turn on Audio Source and launch media.

• Select Input Source from Remote Control or Subwoofer Front

Panel.

• Adjust each Speaker Volume as needed.

EXCLUSIVE FEATURES
Pro-Logic Surround

The Multimedia System is equipped with a Pro-Logic surround
mode that provides 5.1 channels of sound with conventional Left
and Right Stereo Sources.

• Select PRO mode for Movie Surround Soundtrack

• Disble PRO mode for Music or Game 2-Channel Sound.

System is not powering on?

• Switch Power Button on and verify if the LED Indicator is
Illuminated.

• Confirm that the AC plug is plugged in and that there is power
to that outlet.

Speaker(s) does not produce sound?

• Verify the system is getting power and check above steps.

• Make sure the volume is turned up to an audible listening level

and/or your PC is not in a mute status.

• Verify that all cables are plugged into the correct jacks.

• Try connecting your system to another audio source or device.

If the system works correctly with the other device, then your
first device is most likely the cause of the problem.

Sound is distorted or is not clear?

• Low quality compressed music files will increase the distortion
and noise that are easily noticed with amplified speakers.
Recheck sound quality with a non-compressed music file.

• Check the audio source level and decrease if necessary. You
should never have your source volume above 90% volume level
to minimize distortion.

CAUTION

RISK OF ELECTIC SHOCK

DO NOT OPEN

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• Avoid high temperatures. Allow for sufficient heat dispersion
when installed in a rack.

• Keep the bass module free from moisture, water, and dust.

• Do not let foreign objects into the port opening of the subwoofer.

• Handle the power cord carefully. Hold the plug when unplugging

the cord.

• Unplug the power cord when not using the unit for long period
of time.

• Do not let flammable sprays come in contact with the unit.

• Never disassemble or modify the unit in any way.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE

EXMS510

VM Audio Tech Support

US / Canada
phone: (855) audio-99 / [phone]
email: [e-mail]

EXMS510

Quick Installation

Guide

| 7

| 8 | 9

| 10

© VM Audio All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.

Rev. 1

Five Satellite Speakers and One Subwoofer

5.1 Speaker System

Quick Installation

Guide

EXMS510

Rev. 1

RCA-to-RCA Cables

(3 pcs)

RCA to 3.5mm Cable

(1 pc)

Quick Guide

2

1

3

Front Panel Top Panel

1. Power Button

2. Power L.E.D.

3. Function Buttons

INPUT SET

MASTER VOLUME

R

FR FRSR SR

SW CEN

6

SL

CEN

L

DVD AUDIO INPUT AUDIO OUTPUT

AUX AUDIO INPUT

7

4

4. Power Switch

5. AC Power Cord

6. RCA Aux Audio Inputs

7. RCA Surround Audio Inputs

8. RCA Speaker Outputs

ON

OFF

POWER SWITCH

3. ConnectConnections/ControlsConnections/Controls2. Connections/Controls1. Inside The Box

ON/STANDBY

MUTE

INPUT PRO-LOGIC RESET

FR

FL

SLEEP

VOL

VOL

VOL

VOL

SW

CEN.

VOL

8

SLFL FL

AC IN

5

ON / STANDBY MUTE

INPUT

PRO-LOGIC

RESET

SLEEP (-/+)

FL (-/+)

FR (-/+)

SW (-/+)

CEN (-/+)

MASTER VOL (-/+)

SL (-/+)

SR (-/+)

VOL

VOL

VOL

MASTER

VOL

VOL

VOL

VOL

VOL

SR

SL

----- System power (On/Off) / Mute

----- Audio source selector

----- Multi-channel sound (On/Off)

----- Volume reset

----- Automatic system turn off

----- Front left volume controller

----- Front right volume controller

----- Subwoofer volume controller

----- Center volume controller

----- Master volume controller

----- Surround left volume controller

----- Surround right volume controller

R

FR FRSR SR

SW CEN

SL

CEN

DVD AUDIO INPUT AUDIO OUTPUT

OFF

POWER SWITCH

SLFL FL

AC IN

ON

AUX AUDIO INPUT

L

1. Plug the Speaker Wires from each Satellite Speaker
into the RCA Output jacks on the Subwoofer.

2. Plug the Subwoofer Power Cord into an electrical
outlet.

1. Using the appropriate audio cable (RCA-to-RCA or
RCA-to-3.5m Cable, both included) plug one end of the
cable into the audio output of your choice for source.

2. Plug the other end of the cable into the Input Section
of the Subwoofer.

4. Setup (option 1)

R

FR FRSR SR

SW CEN

SL

CEN

DVD AUDIO INPUT AUDIO OUTPUT

SLFL FL

AC IN

ON

OFF

POWER SWITCH

L

AUX AUDIO INPUT

TV

DVD / Surround Processor

MP3

Smartphone

Notebook

Game Console

Tablet

| 1 | 2 | 3 | 4 | 5 | 6