v.LOGiC V6-NTG6-31 User Manual

v.LOGiC Intelligent Solution

Interface

V6-NTG6-31

Compatible with 7” MBUX systems

with 31pin socket

in Mercedes vehicles

Version 13.11.2020 V6-NTG6-31

Page

1

"

Product features

• Interactive lane lines with calibration function

• Own on-screen display and setup

• Rear-view camera input

• Automatic switching to rear-view camera input on engagement of reverse gear from

all operation modes

• Front camera input

• Side camera inputs

• Side- or front camera activation via blinker signal

• Manual switching to cameras

• 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,

camera, reverse gear)

• Compatible with all factory video accessories

• USB update-port for software-updates by consumer

• Plug&Play installation for MBUX systems with 31 pin socket !

Version 13.11.2020 V6-NTG6-31

Page

2

"

Contents

1. Prior to Installation

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

1.3. Setting the dip switches of the interface-box V6C-M626-SP

1.4. LED’s of the interface-box V6C-M626-SP

2. Connection schema

3. Installation

3.1. Connecting interface-box and harnesses on MBUX systems with 31 pin socket

3.2. GMSL connection

3.2.1. After-market front camera

3.2.1.1. Connection to the after-market front camera

3.2.1.2. Settings for connecting an after-market front camera

3.2.2. After-market wide view front camera

3.2.2.1. Connection to the after-market wide view front camera

3.2.2.2. Settings for connecting an after-market wide view front camera

3.2.3. After-market side view cameras

3.2.3.1. Connection of the after-market side view cameras

3.2.3.2. Settings for connecting of after-market side view cameras

3.2.4. After-market rear-view camera

3.2.4.1. Connection to the after-market rear-view camera

3.2.4.2. Settings for connecting an after-market rear-view camera

3.2.4.3. Settings for OEM rear-view camera

3.2.5. Configurable trigger outputs

3.3. Interactive lane lines

3.3.1. Interactive lane lines settings

3.4. Picture settings

4. Operation

4.1. Main OSD On-screen display

4.1.1. OSD – Operation

4.1.2. OSD – Additional setting options

4.2. Selecting the interface as current video source

5. Specifications

6. Connections (interface-box)

7. Technical support

Version 13.11.2020 V6-NTG6-31

Page

3

"

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.

Version 13.11.2020 V6-NTG6-31

Page

4

"

Requirements

Brand

Compatible vehicles

Compatible systems

Mercedes

A-Class (W177) since 05/2018
B-Class (W247) since 12/2018
CLA Coupé (C118) since 03/2019
CLA Shooting B (X118) since 07/2019
GLB (X247) since 09/2019
Sprinter (W907/910) since model year 2018

MBUX with 31 socket:

7” screen without navigation

Interface-box
V6C-M626-SP
HW_____ SW_____

Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.

V6C-MBN6-SP2
harness

GMSL cable
CAB-DFF-YDMF050

V4C-VIDEO
harness

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

Version 13.11.2020 V6-NTG6-31

Page

5

"

Head unit

Dip 1

Dip 2

Dip 3

7” NTG6 screen

OFF

OFF

OFF

1.3. Setting the dip switches of the interface-box V6C-M626-SP

Dip switches on the back of the interface-box V6C-M626-SP are used to set the monitor
type. The default setting is:

After each change of the dip switch settings you have to execute a power reset of the
interface-box!

1.4. LED‘s of the interface-box V6C-M626-SP

Version 13.11.2020 V6-NTG6-31

Page

6

"

2. Connection scheme

Version 13.11.2020 V6-NTG6-31

Page

7

"

3. Installation

Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent
12V source. If according to factory rules disconnecting the battery is to be avoided, it is
usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show
success, disconnect the battery with a resistor lead.
If power source is not taken directly from the battery, the connection has to be checked
for being start-up proven and permanent.
Prior to wire and device installation we suggest to connect and test correct function of all
after-market and factory infotainment equipment!

The interface is installed on the backside of the head unit.

A-Class: On the A-pillar on the driver's side
GLE: Under the passenger seat
Sprinter: Behind the factory monitor

3.1. Connecting interface box and harnesses on MBUX systems with 31 pin socket

Version 13.11.2020 V6-NTG6-31