v.LOGiC V5-NBT-PNP User Manual
v.LOGiC Intelligent Solution
Interface
V5-NBT-PNP
Compatible for the F-series BMW with navigation
system or radio and 6.5”, 7”, 8.8” or 10.25”
monitor with 4+2pin HSD2 LVDS connector
Version 04.09.2020 V5-NBT-PNP
Page
1
"
Product features
• Own on-screen display and setup
• Rear-view camera input
• Automatic switching to rear-view camera input on engagement of reverse gear from
all operation modes
• Front camera input / SMART-LINK input
• Control of SMART-LINK module over iDrive control panel
• Manual switching to rear-view camera (only for vehicles with PDC button)
• Manual return from rear-view and front camera (cancellation of automatic switching)
• 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,
camera, reverse gear)
• Picture-in-picture mode combining after-market rear-view and front camera
picture(s) with factory parking sensor graphics
• Interactive lane lines
• Compatible with all factory video accessories (e.g. rear-view camera, Top-View,
nightvison, DVD-changer, TV-tuner)
• USB update-port for software-updates by consumer
Version 04.09.2020 V5-NBT-PNP
Page
2
"
Contents
1. Prior to Installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
1.3. Setting the dip switches of the interface-box V5C-M637
1.4. LED’s of the interface-box V5C-M637
2. Connection schema
3. Installation
3.1. Connecting interface-box and harnesses
3.1.1. Special case BMW i3
3.2. LVDS connection
3.2.1. After-market front camera
3.2.1.1. Connection to the after-market front camera
3.2.1.2. Settings for connecting an after-market front camera
3.2.2. After-market rear-view camera
3.2.2.1. Connection to the after-market rear-view camera
3.2.2.2. Settings for connecting an after-market rear-view camera
3.2.2.3. Settings for OEM rear-view camera
3.2.3. SMART-LINK
3.2.3.1. SMART-LINK video and control connection
3.2.3.2. SMART-LINK audio connection
3.2.3.3. Settings for SMART-LINK connecting
3.2.4. Configurable trigger outputs
3.3. Interactive lane lines
3.4. Picture settings
4. Operation
4.1. OSD – On-screen display
4.1.1. OSD – Operation
4.1.1.1. iDrive High
4.1.1.2. iDrive Low
4.1.2. iDrive selection
4.1.3. OSD – Additional setting options
4.2. Video-in-motion function
4.3. Selecting the interface as current video source
4.4. Controlling of the connected SMART-LINK module
4.4.1. Controlling by iDrive High
4.4.2. Controlling by iDrive Low
5. Specifications
6. Connections (interface-box)
7. Technical support
Version 04.09.2020 V5-NBT-PNP
Page
3
"
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
Version 04.09.2020 V5-NBT-PNP
Page
4
"
Requirements
Navigation F-series with navigation system or radio with 6.5”, 7”, 8.8“ or
10.25“ monitor with 4+2pin HSD2 LVDS connector
Note ”PDC – picture in picture” and “interactive lane lines” function is
not simultaneously usable
”PDC – picture in picture” function is only for 8.8“ and 10.25“
monitor available
Interface-box
V5C-M637
HW_____ SW_____
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
V5C-UNI01
harness
LVDS cable
CAB-HSD2-RR148
TV-BM01
harness
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Check compatibility of vehicle and accessories
1.2. Check compatibility of vehicle and accessories
Version 04.09.2020 V5-NBT-PNP
Page
5
"
Vehicle/ navigation
Dip 1
Dip 2
Dip 3
6.5“ monitor (ver.1)
OFF
OFF
OFF
6.5“ monitor (ver.2)
OFF
OFF
ON
7“ monitor (ver.1)
OFF
OFF
OFF
7“ monitor (ver.2)
OFF
ON
OFF
8.8“ monitor
ON
OFF
OFF
10.25“ monitor (ver.1)
ON
OFF
OFF
10.25“ monitor (ver.2)
ON
ON
OFF
Valid%input source
CAN%ok
Power
1.3. Setting the dip switches of the interface-box V5C-M637
Dip 1 and 2 on the back of the interface-box V5C-M637 are used to set the monitor type. The
default setting is:
After each change of the dip switch settings you have to execute a power reset of the
interface-box!
1.4. LED‘s of the interface-box V5C-M637
Version 04.09.2020 V5-NBT-PNP
Page
6
"
2. Connection schema
Version 04.09.2020 V5-NBT-PNP
Page
7
"
Inte rf ace-box
V5C-M637
FRONT
4+2Pin>HSD2>
LVDS>female
vehicle harness
Back>of factory
monito r
LVDS>cable
CAB-HSD2-RR14 8
Version 04.09.2020 V5-NBT-PNP
Loading...