Vjoycar TK05, TK10, TK15, T13, TK20 Quick Operation Manual

Web: www.vjoycar.com Email: [e-mail] Skype: vjoy c a r Whatsapp:[phone]

VJOYCAR GPS Tracker - Quick Operatio n Gui de

Step 1 Install SIM Card.

A. Make sure the SIM card is with 2G ser vice still if you are using 3G or 4G
SIM cards but your GPS trackers are VJOYCAR 2G GPS trackers; Make sure
the SIM card is with both gsm sms and gprs service even you don’t want to use
online tracking platform; Make sure the SIM card is with Call ID service also.
B. Make sure SIM with metal face top, clipped icon to the right as below. Or
follow the SIM direction sticker on the device to operate!
C. For Portable Trackers, insert SIM and you will see GREEN lig ht flash once
and then turn to on for 30 second, trackers will be on directly, don’t need press
the button again;For cable installed trackers, once complete install and get
power with car battery, trackers will be on directly also.
D. Call Device’s SIM phone number and make sure it could get through but
without answer.!

Step 2 Set APN (Access Point Name).

This setting is to enable tracker to upload data to the server through GPRS!

A. Different Telecom provider has different APN. Please confirm APN setting

on your SIM operator’s website or call your SIM operator directly. E.g.
Vodafone APN:live.vodafone.com (Some time APN will include username and
password)!
B. Use your cellphone to send SMS *apn*aXXX*bXXX*cXXX* to the SIM
number in the device.
aXXX refer to APN, bXXX refers
to username, cXXX refers to
password. If there is no username
and password required, just leave
bXXXXX*cXXXXX* as blank.! aXXX,
bXXX, cXXX are just samples, don’t
send this sms directly!

C. Your cellphone will receive SMS reply, says the appointed APN is set (See
screenshot as above).
Notes:

1. No matter what APN settings you send to the device,you will get a reply as
long as the SMS format is right. But it doesn't mean the device has connected

Web: www.vjoycar.com Email: [e-mail] Skype: vjoy c a r Whatsapp:[phone]

to server successfully. You have to finish the second step to make sure the

APN settings is correct.!

2. The APN setting is for the SIM card inside the gps tracker, not for your own
master control cellphone number. Especially, when the SIM card inside the
tracker and the SIM card inside your master control cellphone are from two
different operator, and you mess them up, then you can’t see the device work
at all.

3. Step 3 Set Master Number.

A. Use master conrol cellphone to
send SMS *master*123456*+country
code and your cellphone number* to
the device sim number!
B. Your cellphone will receive reply
says “mater phone number is
successfully set”. And you cellphone
number will be the only master phone
to the tracker (See screenshot as
below).

Notes:

1.on above photo, +86 is our country code, pls replace it to your own count ry
code; 13621925935 is the cellphone number which is sending sms to the
tracker SIM phone, not the tracker SIM phone number. Don’t mess it up!

2.123456 is the default password, it can be changed by SMS command after
the registration.

3.“+” symbol is necessary before the country code so that server is able to tell
where the data is coming from. E.g. +1 for US, +44 for UK , +39 for Italy!

4.If there is no sms reply. Pls kindly double check: whether APN settings is
wrong, please contact the SIM operator to confirm APN settings again;
whether the tracker is with gsm signal now, pls kindly call it; whether the SIM
card is with 2G service still(3g gps trackers no need 2G service), pls contact
with your operator.

Step 4 Enable the data upload function.

A.Use cellphone to send SMS *routetrack*1* for 1 hour data upload, 6
locations per minute when devic e is moving; Or use cellphone to send SMS
*checkm*10*, tracker will upload 1 data each 10 minutes both stationary or
moving.
(For other command you need to test, please see details in the user manual.)

Step 5 Send sms to get tracker’s location.

Web: www.vjoycar.com Email: [e-mail] Skype: vjoy c a r Whatsapp:[phone]

A. If send *locate*,it will reply

coordinates; if send
*locataddress*,it will reply
address; if send *locatemap*,it
will reply google map link.

Step 6 See tracking information on-line!

A. Visit website: www.miitown.com
B. Login with master number (with 00country code) and default password

123456. (See screenshot as below) ,Replace the 00 to + on the master control
number. Eg, if set master control number [phone], then login in with :
008613621925935

C. All trackers under the same master phone number will be shown under the
device list.!
D. Click history on the pop up info window, chose the date and time you need
you view, and click Play to view the tracking history of the appointed time.

E. Click report, chose the device, date and time you need you view, and click