Vjoy Car T805 User Manual
T805 USER GUIDE
!
1. T805 Features
Designed to replaced to the original rectifier in the motorcycle with GPS
tracker built-in，able to deliver regular and accurate location records using
state of the art GPS over the cellular network, in a hidden way.
!
Flexible in its programming options, the T805 can be easily re-programmed
via SMS by the user to set and reset it’s scheduled and motion detected
location reporting.
!
!
2.Hardware Specifications:
Size: 78*50*24mm Wire length: 280mm
Storage Temp: -40 to 85°C!
!!! Operating Temp: -10 to 55°C
GPS: U-BLOX G6010-ST, 50 channel
Antennae: Internal
Frequency: L1 1575.42 MHz
Position Accuracy: <5m
Sensitivity:
Tracking: –161 dBm
Cold starts: –148 dBm
Hot starts: –156 dBm
Cold start: <27s
Warm Start: <5s
Hot Start: 1s
A-GPS: AssistNow Online and AssistNow Offline services,
OMA SUPL compliant
GPRS: MTK 6260D
Quad band; 850/900/1800/1900 MHz
GPRS Class 12
Antennae: Internal
!
!
!
!
!
!
!
!
!
!
3. Product Image
!
!
!
!
!
!
!
!
!
!
!
!
4. Operation Command Guide
4.1 Set APN: (VERY IMPORTANT AND MUST BE DONE 1ST) For the
device to send data to the server, this command MUST be enabled.
!
SMS: *apn*AXXX*BXXX*CXXX* This command sets the telecom Access
Point Name. BXXX refers to user name, CXXX refers to password.
!
If there is no user name and password required, send as *apn*AXXX*
!
If there is user name but no password required, send as
*apn*AXXX* BXXX*
!
!
APN information can be checked on local telecom website.
!
You will receive the following text: "Notice: APN is set to XXX. User name: XX.
Password: XX”
!
Note: For International sims, please contact sales for activation and APN
information.
!
!
4.2 Registering the “Master” Controller
SMS to the device: *master*123456*+1XXXXXXXXXXXX*, (For
instance, master controller phone number is +1XXXXXXXXXXXX. +1 refers to
the country code. XXXXXXXXXXXX is the cellphone number. Please make sure
country code is included, and digit 0 is not needed before cell phone number)
!
!
Device Response: "Notice: Cell Phone # xxxxxxxxxx is set to master
controller, the password is 123456.” (The device has a default password of
“123456” to initially program in your PDA/Phone.
!
NOTE: The device will ONLY listen and respond to instructions from this
number unless you choose to turn on the multi controller function and open
the device to any cell phone number（see NO.12 for details）.
!
!
!
4.3 Emergency takeover function:
With the proper password, any phone number could takeover of full
functionality under emergency situation.
SMS: *master*123456*+1XXXXXXXXXXX * (For instance, master
controller phone number is +1XXXXXXXXXXX. +1 refers to the country code.
XXXXXXXXXXXX is the cellphone number. Please make sure country code is
included, and 0 is not needed before cell phone number)
!
You will receive back a text that says: "Notice: Master controller change is
successful for +1XXXXXXXXXXX, the new master controller is
+1XXXXXXXXXXXX."
!
!
4.4 Changing the Password:
SMS: *password*654321* (654321 refers to new password)
You will receive the following text: "Notice: The password change is
successful for +1XXXXXXXXXX. The new password is 654321."
!
!
!
!
5. Motion Detected Alert
Master Controller will receive alert call or SMS once the protected property is
moved.
!
!
5.1 SMS or CALL Alert Settings:
The Alert function(s) can be set accordingly with the following SMS
commands. The system default setting is call alert.
!
SMS: *alertoff* You will receive a text message “Notice: System has ended
alert function.”
SMS: *smsalert* You will receive a text message “Notice: System has
entered SMS alert function.”
SMS: *callalert* You will receive a text message “Notice: System has
entered call alert function.”
!
Note:
* The Alert Systems automatically initiate a notification to the Master
Controller when the motion sensor is activated after 3 minutes nonmovement,which indicates the vehicle/motorcycle is moved.
1.Call alert will call master controller 2 times when motion is detected.
Loading...