Vizualogic CiG-Blue Owner's Manual
"LUETOOTH
WWWCIGBLUECOM
Quick-Start Guide
Bluetooth In-Car Hands Free System
Device ID
Pass Key
Power On Turn on Bluetooth When the vehicle is turned on, the
Pairing Press and hold for 12
seconds
Answer a Call Short button press Just a short press of the button
Ending a Call Hold for 2 seconds To hang up, press and hold until you
Reject a Call Hold for 2 seconds To reject an incoming call press
Adjust the volume Short button press During a call, the volume can be
CiG-Blue_#####
1234
paired cell phone will automatically
connect to the CIG-Blue system. If
the phone has not been paired, the
CIG-Blue will enter pairing mode.
Press and hold the button until you
3 beeps, after 12 seconds.
hear
Using your phone to complete the
pairing, enter the Pass Key "1234".
answers an incoming call.
1 beep after 2 seconds.
hear
and hold the button until you hear
1 beep, after 2 seconds.
adjusted with repeated button
presses. The volume level will
cycle between Min / Max, and a tone
sounds when you reach each end of
the scale.
CiG-Blue™ Bluetooth In-Car Handsfree System User Manual
Transfer to the Handset Hold for 8 seconds Press and hold the button until you
2 beeps, after 8 seconds, to
hear
transfer the call between the CIG
Blue hands free system and your
handset.
Redial the last number Hold for 2 seconds In standby mode, press and hold the
button until you hear
seconds to redial the last number.
Voice Dialing Short button press In standby mode, a short tap of
the button activates the voice dial
feature on your cell phone.
Memory Erase Press and hold for 15
seconds
Press and hold the button until you
4 beeps after 15 seconds to
hear
erase all pairings from the device.
Once the memory is erased, the
system will enter pairing mode.
Refer to "2. Pairing" for instructions
on connecting your new phone.
1 beep after 2
Loading...