Your display is designed and manufactured to operate within dened design limits.
Misuse may result in electric shock or re. To prevent your display from being
damaged, the following instructions should be observed for the installation, use,
and maintenance of your display. Read the following safety instructions before
operating your display. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch o the power
before connecting other components to your display.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Unplug the power cord before cleaning your display.
• When moving your display from an area of low temperature to an area of high
temperature, condensation may form in the housing. Wait before turning on your
display to avoid causing re, electric shock, or component damage.
English - ii
• A distance of at least three feet should be maintained between your display and
any heat source, such as a radiator, heater, oven, amplier etc. Do not install your
display close to smoke. Operating your display close to smoke or moisture may
cause re or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of your display and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place your
display in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your display cabinet. Do
not place any objects on the top of your display. Doing so could short circuit parts
causing a re or electric shock. Never spill liquids on your display.
• Your display should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
• Do not apply pressure or throw objects at your display. This may compromise the
integrity of the display. The manufacturer’s warranty does not cover user abuse or
improper installations.
• The power cord must be replaced when using dierent voltage than the voltage
specied. For more information, contact your dealer.
• When connected to a power outlet, power is always owing into your display. To
totally disconnect power, unplug the power cord.
• Do not overload power strips and extension cords. Overloading can result in re
or electric shock.
• The wall socket should be installed near your display and easily accessible.
• Only power of the marked voltage can be used for your display. Any other voltage
than the specied voltage may cause re or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid
handling the power cord during electrical storms.
• Unplug your display during a lightning storm or when it will not be used for long
period of time. This will protect your display from damage due to power surges.
• Do not attempt to repair or service your display yourself. Opening or removing the
back cover may expose you to high voltages, electric shock, and other hazards. If
repair is required, contact your dealer and refer all servicing to qualied service
personnel.
• WARNING: Keep your display away from moisture. Do not expose your display to
rain or moisture. If water penetrates into your display, unplug the power cord and
contact your dealer. Continuous use in this case may result in re or electric shock.
• Do not use your display if any abnormality occurs. If any smoke or odor becomes
apparent, unplug the power cord and contact your dealer immediately. Do not try
to repair your display yourself.
• Avoid using dropped or damaged appliances. If your display is dropped and the
housing is damaged, the internal components may function abnormally. Unplug the
power cord immediately and contact your dealer for repair. Continued use of your
display may cause re or electric shock.
• Do not install your display in an area with heavy dust or high humidity. Operating
h
your display in environments with heavy dust or high humidity may cause re or
electric shock.
• Follow instructions for moving your display. Ensure that the power cord and any
other cables are unplugged before moving your display.
• When unplugging your display, hold the AC/DC power adapter, not the cord. Pulling
on the power cord may damage the wires inside the cord and cause re or electric
shock. When your display will not be used for an extended period of time, unplug
the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause the
batteries to leak which can damage the remote control or injure the operator. Do
not expose batteries to excessive heat such as sunshine, re or the like.
• If any of the following occurs, contact the dealer:
• The power cord fails or frays.
• Liquid sprays or any object drops into your display.
• Your display is exposed to rain or other moisture.
• Your display is dropped or damaged in any way.
• The performance of your display changes substantially.
• This apparatus shall not be exposed to dripping or splashing and no objects lled
with liquids, such as vases, shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
• CAUTION: These servicing instructions are for use by qualied service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualied to do so.
• The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
DANGEROUS VOLTAGE within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electrical shock to persons.
• Please use caution around the display: pulling or pushing on the
display may cause the display to tip or fall over resulting in personal
injury and/or property damage.
• WARNING: Exposure to loud sounds can damage your hearing causing hearing
loss and tinnitus (ringing or buzzing in the ears). with continued exposure to loud
noises, ears may become accustomed to the sound level, which may result in
permanent damage to hearing without any noticeable discomfort.
• Install the TV where it cannot be pulled, pushed or knocked over.
• Do not allow children to hang onto the product.
• WARNING: This product includes small parts and cables that may present a choking
hazard to young children, and the packaging may cause suocation. Always keep
the cables, parts and packaging out of the reach of young children.
• Store the accessories (remote, batteries, etc.) in a location safely out of the reach
of children.
• The American Academy of Pediatrics discourages television viewing for children
younger than two years of age.
English - iii
Safety Information - Tablet Remote
Read all the safety information below before using your VIZIO Tablet Remote. For
additional information, read the User Manual available directly through the VIZIO
SmartCast™ application on your Tablet Remote.
Driving Safely
Use of your Tablet Remote while driving may cause distractions and may be prohibited
in some places. Always comply with local laws and regulations when driving. Driving
safely is your primary responsibility. If you do use your Tablet Remote while driving,
against the reconsecration of VIZIO, NEVER type or read content, navigate on the
Internet, or perform any other activity that takes your attention away from the road.
ALWAYS keep your eyes on the road and your hands on the wheel.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or strokes when exposed to
ashing lights such as when playing games or watching video, even if those conditions
have not been previously diagnosed. If you or anyone in your family has a history of
seizures or strokes, or if you have any other reason to think you or someone under your
supervision may be susceptible to epileptic seizures or strokes, consult a doctor before
playing games or watching video on your Tablet Remote. If you experience headaches,
blackouts, seizures, convulsion, eye or muscle twitching, loss of awareness, involuntary
movement, or disorientation stop using your Tablet Remote and consult a doctor. To
reduce risk hold your Tablet Remote at an arms-length distance from your eyes, use it in
a well-lit room, take frequent breaks and stop if you are tired.
Warning About Hearing Damage
Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus
(ringing or buzzing in the ears). With continued exposure to loud noises, ears may
become accustomed to the sound level, which may result in permanent damage to
hearing without any noticeable discomfort.
LOUD SOUNDS + TIME = HEARING LOSS
The more time you spend exposed to loud sounds, the more likely you are to damage
your hearing.
• Limit the amount of time you spend using headphones, or earpieces.
• Do not turn up the volume to block out surrounding noise.
• If you can’t hear people speaking, turn down the volume.
If you experience a sensation of pressure or fullness in your ears, ringing in your ears,
or mued speech or believe you may have experienced noise induced hearing loss, and
you should have your hearing checked by an ear doctor.
Repetitive Motion
Repetitively performing actions such as pressing keys or typing, may result in occasional
discomfort in your hands, arms, shoulders, neck, or other parts of your body. Take
breaks often and if you continue to have discomfort during or after such use, stop use
and see a doctor.
English - iv
Glass Parts
Your Tablet Remote may contain glass parts. Dropping your Tablet Remote on a hard
surface or a substantial impact to your Tablet Remote could break this glass. If the glass
breaks, do not touch or attempt to remove it. Stop using your Tablet Remote until the
glass is replaced by an authorized service center.
Potentially Explosive Atmosphere
When you are in an area with potentially explosive atmosphere turn o your Tablet
Remote. Do not remove, install, or charge batteries to avoid creating sparks that
can cause an explosion or re resulting in serious injury or even death. Areas with
potentially explosive atmospheres are often, but not always, clearly marked. Potential
areas may include fueling areas, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain dust, or metal powders, or
areas where you would normally be advised to turn o your engine.
Care and Maintenance
Do not use volatile solvents to clean this product. Such chemicals may damage it. To
clean product, gently wipe it with a clean, dry, soft cloth.
Battery Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations.
Because this product contains electronic components and a battery, it must be disposed
of separately from household waste. Contact VIZIO or visit www.vizio.com/environment
to learn about disposal and recycling options.
Aircraft
Turn o your Tablet Remote whenever instructed to do so by airline sta. If your Tablet
Remote has an airplane mode or similar feature, consult airline sta about using it in
ight.
Implantable Medical Devices
If you have an implantable medical device, such as a pacemaker or debrillator, consult with
your doctor before using your Tablet Remote. Persons with implantable medical devices
should observe the following precautions:
• When your Tablet Remote is ON, always keep it safely away from the implantable
medical device.
• Immediately turn your Tablet Remote OFF if you have any reason to suspect that
interference is taking place.
Read and follow the directions from the manufacturer of your implantable medical device.
If you have any questions about using your Tablet Remote with your implantable medical
device, consult with your doctor.
Operating Temperature
Your Tablet Remote is designed to operate between the temperatures of 32° to 95° F (0°
to 35° C).
Award-Winning Customer Care At Your Convenience.
NEED HELP?
Go to: support.vizio.com
Find help with:
•
New product setup
• Connecting your devices
• Technical problems
• Product updates and more
Live chat
support available
You can also contact our
popular support team at:
Phone: (877) 698-4946 (toll-free)
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CSt)
Saturday - Sunday: 9 amto 6 p m (CSt)
Getting started with the Google Cast. ................................................................................................. 30
How to cast content .................................................................................................................................... 31
Wall-mounting the Display ...................................................................................................................32
Legal Information ..................................................................................................................................42
English - vi
22
Package Contents
VIZIO UHD Home
Theater Display
Multi-Language
Quick Start Guide
Display
Stands
6” Tablet
Remote
4 x Phillips
Screws
Power
Cable
Wireless
Charging Dock
HDMI
Cable
Power Adapter and
USB power cable
Basic Remote
w/Batteries
English - 7
Welcome to VIZIO SmartCast
Your new VIZIO Home Theater Display™ is part of the all-new collection of home
theater displays, sound bars and home audio speakers that can all be controlled by
one ingenious app: the VIZIO SmartCast app.
With the app, you can browse movies, TV shows, music and more from multiple
sources or apps in one view, without having to switch back and forth between those
apps or sources. And then just tap to cast the content to your VIZIO display - from
anywhere in your home. It works over WiFi, so you can control your VIZIO display
from any room, and keep using your VIZIO Tablet Remote to continue browsing,
play games, text or even watch another show, without disrupting what’s playing
on your display. With VIZIO SmartCast, what you love doesn’t change, but how you
experience it will never be the same.
Now let’s get you into setup so you can start casting!
™
!
English - 9
This is your Tablet Remote
The 6″ Android Tablet Remote brings the way
you interact up to speed with the rest of your
entertainment experience. Simply tap, swipe, or
use voice controls to access a virtually limitless
library of casting content.
In addition, it’s a full-featured Android tablet
where you’ll have access to thousands of apps
and vast library of content already available,
creating an amazing second screen experience.
English - 10
Volume
buttons
Headphone port
Power button
Top
LeftFront
USB port
Bottom
Charging your Tablet Remote.
Your Tablet Remote is charged and ready for
you to use. When you need to recharge the
battery, simply plug the Tablet Remote into a
power outlet using the USB power cable and
power adapter.
To charge your Tablet Remote using the wireless
charging dock, connect it to a wall outlet using
the USB cable and power adapter. Then simply
place the Tablet Remote on the dock.
USB power cable
Power adapter
OR
Wireless charging dock
USB power cable
English - 11
This is your basic remote
English - 12
Turn the Display on or o.
POWER
LINK
Activate pairing mode
on display.
VOLUME
Increase or decrease the
loudness of the audio.
MUTE
Turn the audio on or o.
INPUT
Change the currently
displayed input.
ASPECT RATIO
Cycle through the dierent
aspect ratio modes.
CHANNEL UP/DOWN
Not supported on this model.
PIC
Cycles through the dierent
picture setting modes.
PLAY/PAUSE
Play and pause content.
Inserting and replacing batteries.
Two AAA batteries are included for you to use with
the basic remote control.
To insert/replace the batteries:
1. Find the notch on the back of the remote. Insert a
coin and pry open the back cover.
2. Remove the back cover and insert two AAA
batteries (included). Be sure to align the + and -
signs on the batteries and remote.
Visit http://support.vizio.com/ if you
have any questions.
1
WARNING: keep the remote control
batteries away from children. It may
cause choking and/or lead to a re or
chemical burn if mishandled. Do not
dispose of batteries in re. Replace only
with batteries of the correct type.
2
English - 13
Installing the Display Stands
1
It is recommended that two people take
part in the stand installation.
Remove any plastic lm from the Home Theater
Display and stands.
Place the display screen-down on a clean, at
surface. To prevent scratches or damage to
the screen, place the display on a soft surface
such as a carpet, rug, or blanket, and avoid any
sharp edges.
Make sure the top and bottom edges of the screen
are being supported by the surface to avoid damage.
English - 14
Î
P
2
Insert the stands into the base of the display. (The
stands are identical.)
Secure each stand to the display with two (2) Phillips
screws (included).
Insert the screws into the back of the display and
tighten them using a Phillips screwdriver.
When you are nished, place the display on a stable,
level surface.
English - 15
First-Time Setup
Connect all of your devices to
the display rst.
1
Choose ONE connection type
for each device.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
English - 16
English - 16
Common Devices
HDMI CABLE (HDMI 1-4)
CABLE/SATELLITE
RECEIVERS
COMPONENT
CABLE
HDMI CABLE
(HDMI 1-4)
Note: HDMI port 5 is recommended for use with high-performance devices only.
High Velocity Mode is only available for compatible gaming systems or highperformance PCs for display of 2160p @ 60fps.
INTERNET
CONNECTION
THIS DISPLAY DOES NOT HAVE A COAXIAL
CABLE INPUT, USE THE INCLUDED HDMI
CABLE TO CONNECT YOUR CABLE/
SATELLITE RECEIVER TO HDMI PORT 1-4.
• ANALOG VIDEO
• HD VIDEO (1080p)
• STEREO AUDIO
• DIGITAL VIDEO
• UHD VIDEO
• HD AUDIO
• HIGH-SPEED INTERNET CONNECTION
• LATEST CONTENT
Instant access to Movies, TV
Your Home Theater Display does NOT contain a television tuner.
Television tuners are sold separately and are not sold by VIZIO.
Cable or
Satellite Receiver
Blu-Ray Player
Gaming Console
Gaming PC
Shows, Music, and more.
English - 17
2
Connect one end of the power cable to the back of the
display. The at edge of the connector faces the outer
edge of the display.
Plug the other end of the power cord into an electrical
outlet. The display powers on automatically.
WARNING: To avoid shock when plugging
in your device please refer to the saftey
warnings page of this document.
English - 18
3
Turn on the Tablet Remote by pressing and holding
the Power button for a few seconds.
The setup wizard appears and describes how to pair
the Tablet Remote with the P-Series Display. Hold the
Tablet Remote close to the VIZIO logo on the bottom
right corner of the display for a few seconds to pair
it with the P-Series Display. Follow the on screen
instructions to nish the setup wizard.
In order to take full advantage of the Android Tablet,
a Google account is required. You can choose to use
an existing account or create a new one during the
set up process.
English - 19
Sleep mode and unlocking the Tablet Remote.
The Tablet Remote’s screen will turn o automatically
if it is not being used. This is called sleep mode. You
can also press the Power button to put the tablet in
sleep mode.
To wake the Tablet Remote, press the Power button.
The lock screen is displayed. Unlock the tablet by
sliding your nger from the bottom of the screen to
the top.
You can choose to set a dierent unlock
method in the Settings [ ] > Security >
Screen lock menu. Choose from Swipe
(default), Pattern, PIN, or Password
unlock methods.
This Tablet Remote includes Android
accessibility features. For information
on these features and to obtain other
versions of this guide please visit
www.VIZIO.com or call toll-free VIZIO
customer support at (877)698-4946.
English - 20
Getting familiar with Android
After you nish setting up your Tablet Remote, the
home screen appears. Here you can access apps,
multimedia content, widgets, and much more!
First you should get familiar with the information on
the Home screen as well as how to access dierent
features.
• Multiple Home screens: Swipe left or right to
move between Home screens.
• Viewing notications: Swipe down from the
top of the screen with one nger.
• Quick Tablet Settings: Swipe down from the
top of any screen with two ngers.
• Tablet Settings: Swipe down from the top of
any screen with two ngers, then tap the
icon in the top right corner.
• Google search and voice search: Tap the
Google widget at the top of the Home
screen or say “Ok Google” to search and give
voice commands.
™
.
Battery Indicator Wi-Fi Signal Indicator
Time
Shows the previously
Back
used screen.
Home
Opens the main
Home screen.
Overview
Displays thumbnails
of screens you’ve
worked with recently.
English - 21
Adding more Apps.
*
Google Play oers quick, easy access to a wide variety
of applications developed specically for the Android™
platform. These have been created by developers all
over the world, and have been rated by your fellow
1
Android users.
To shop and add new apps:
1. Tap the Play Store icon on the Home screen.
You will have access to any of your past
purchases on Google Play — as long as
you are signed into the same account
you used to purchase it.
* The applications and content of the applications described herein may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future
updates, modications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or
content. Additional third party terms, conditions and restrictions apply. High-speed/broadband Internet service, access equipment, and a Google account are required and are not provided by VIZIO.
English - 22
2. Tap on the Google Play bar to search for a title
or select one of the categories.
3. When you nd an app, tap on the INSTALL button.
4. Then agree to the terms and tap ACCEPT.
5. The new app appears on the Home screen and is
ready for use.
23
4
5
English - 23
Getting started with the VIZIO SmartCast app.
The VIZIO SmartCast app lets you wirelessly cast
your favorite movies, shows, music and more to your
P-Series UHD Home Theater Display. The app allows
you to search for content and control cast playback
across your favorite apps.
Account Setup
You will need to log into your MyVIZIO account to take
full advantage of VIZIO SmartCast. If you do not have
an account, you can sign up for a free account.
1. Tap on the VIZIO SmartCast to begin.
2. a) Tap the Create an Account button to sign up
for a MyVIZIO account.
OR
b) If you already have an account, tap Sign In
below the Create an Account button to log into
your account.
The VIZIO SmartCast app is preloaded on
the Tablet Remote. The app is also available
for download from the Google Play Store
and Apple App Store for other devices.
English - 24
1
2a
2b
OR
Selecting a Cast device
Your Tablet Remote can be paired with multiple
cast-enabled devices, allowing you to seamlessly
access your content where ever you are.
To select a dierent cast device:
1. On the Home category page, tap This Device. The
device selection screen displays.
12
2. Tap the device you want to begin casting to. Make
sure the other device is a cast-enabled device and
turned on.
English - 25
Basic display functions.
You can turn on/o, change the input, mute, and
adjust the volume of your display right from the VIZIO
SmartCast app.
Input
Change the currently
displayed input.
To access the basic functions,
make sure your Home
Theater Display is selected. If it is not, see
Cast device
English - 26
.
Selecting a
Turn display on or o.
Power
Mute
Turn the display
audio on or o
Settings
Change settings
of display.
Volume
Increase or decrease
the loudness of the
display audio.
Category Pages
1
The VIZIO app categorizes video content into dierent
pages in the app. The pages are organized as:
• TV Shows - Popular, recently added,
recommended, and highly rated TV shows.
• Movies - Popular, recently added,
recommended, Free, and highly rated movies.
• Music - Popular music videos and radio stations.
• Live TV* - My favorite channels, currently
playing TV shows and movies.
• Kids - Movies and TV shows for kids.
• Live Streams - Popular, TV shows, stations,
and extreme sports streaming stations.
To access the dierent pages:
• From the Home page, Swipe Up or Down to
access the dierent category pages. You can also
access these pages by pressing the button in
the top left corner.
* Live TV listings compatible with IP-based set-top boxes from DirecTV and Dish Network services, with more services to be added. See vizio.com/smartcast for details.
English - 27
Using your smartphone
or tablet as a remote
Your VIZIO Home Theater Display brings the
way you interact up to speed with the rest of
your entertainment experience. In addition to
the included Android tablet, you can use your
smartphone or tablet to access a library of
casting content by tapping, swiping, or using voice
controls.
To use your smartphone or tablet as your
SmartCast Remote:
• Download the VIZIO SmartCast on your
compatible mobile device and follow the
on-screen instructions to pair your device
with a VIZIO Home Theater Display.
English - 28
Additional device not included
The VIZIO SmartCast app is available for download
from the Google Play™ store and Apple App Store®.
*
Minimum Recommended Requirements.
Android
™*
• Android 4.4 or higher
**
• RAM: 1.5gb or more
• Storage: 8gb or more
• Networking: Wi-Fi
For a list of supported devices, see Google Play™
supported device article.
*
Availability subject to change without notice.
**
To use the Bluetooth LE functionality you must have Android 5.1 or later.
Google Cast allows you to wirelessly send, or cast, content from your smartphone or tablet to your Home Theater
Display. Cast works by streaming content from one device to another through a local network.
In addition to using the VIZIO SmartCast app, you can also stream content using other apps. Streaming content
to your Home Theater Display is as simple as tapping an icon on your favorite app.
To cast content to your Home Theater Display:
1. Open any cast compatible app.
2. Select the content you’d like to cast and tap the icon.
3. Select the device you’d like to cast to and press play.
To mount your display on a wall, you will need a wall
mount. Consult the information on this page to nd
the appropriate mount for your display.
Installing a display on a wall requires
lifting. To prevent injury or damage to
the display, ask someone to help you.
Be sure the mount you choose is capable of
supporting the weight of the display. After you have
determined that you have the correct mount for your
display, you can begin the installation.
English - 32
To install your display on a wall:
1. Disconnect any cables connected to your display.
2. Place the display face-down on a clean, at, stable
surface. Be sure the surface is clear of debris that
can scratch or damage the display.
3. Remove the stands by loosening and removing
the screws.
4. Attach your display and wall mount to the wall,
carefully following the instructions that came with
your mount. Use only with a UL-listed wall mount
bracket rated for the weight/load of this display.
P50-C1P55-C1P65-C1P75-C1
Screw Size:M6M6M6M8
Hole Pattern:
Weight w/o Stand:
200 mm (V) x
200 mm (H)
31.97 lb
(14.50 kg)
300 mm (V) x
300 mm (H)
40.12 lb
(18.20 kg)
400 mm (V) x
400 mm (H)
61.40 lb
(27.85 kg)
Wall-mount screw locations.
400 mm (V) x
400 mm (H)
102.29 lb
(46.40 kg)
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
English - 33
Additional connections
Connecting an audio device
Your Display can output sound to an audio device,
such as a receiver or sound bar.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
English - 34
To connect your display to an audio device:
1. Verify that your device has a video port that
matches an available port on the Display (HDMI,
3.5mm, etc.)
2. Turn the Display and your audio device o.
3. Connect the appropriate cable (not included) to
the Display and the device.
4. Turn the Display and your device on.
3.5mm to
RCA CABLE
DIGITAL
OPTICAL
CABLE
HDMI
CABLE
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
• 2.0 - 5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
• CEC 2-WAY COMMUNICATION
• 2.0 - 5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
Sound bar system
Audio Receiver
English - 35
Regulatory Information - P-Series Display
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/Display technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radio Frequency (RF) Exposure
Your P-Series Display contains radio transmitters and receivers. The
antenna on your P-Series Display is around the perimeter. For optimal
device performance, and to be sure that human exposure to RF energy
does not exceed the guidelines set forth in the relevant standards, always
follow these instructions and precautions: place your P-Series Display
with the antenna away from your body.
English - 36
Your P-Series Display is designed to comply with local regulatory
requirements concerning exposure to RF energy. For additional
information from the FCC about exposure to RF energy, see: https://www.
fcc.gov/encyclopedia/radio-frequency-safety.
The World Health Organization (WHO) notes that present scientic
information indicates that exposure to RF within the limits set by the
ICNIRP guidelines (from 0-300 GHz) does not produce any known adverse
health eect. Additional information can be found at www.who.int/emf.
Notice
The changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
The manufacturer is not responsible for any radio or Display interference
caused by unauthorized modication to this equipment. It is the respon-
sibilities of the user to correct such interference.
FCC Warning
Changes or modications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be co-located or
operated in conjunction with any other antenna or transmitter subject to
the conditions of the FCC Rules set forth above.
Caution
Always use an AC/DC power adapter that is properly grounded.
Canada Notice for License-Exempt Radio Apparatus
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This device operates on a no-protection no-interference basis. Should
the user seek to obtain protection from other radio services operating
in the same TV bands, a radio license is required. Please consult Industry
Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio
Apparatus in the TV Bands, for details.
Cet appareil est conforme aux CNR exempts de licence d’Industrie
Canada. . Son fonctionnement est sujet aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable
Cet appareil fonctionne sur une base sans protection et sans interférence.
Dans le cas où l’utilisateur cherche à obtenir de la protection des autres
services de radio fonctionnant sur les mêmes bandes TV, aucune license
est requise. Veuillez consulter le document CPC-2-1-28 d’Industrie
Canada, License optionnelle pour les appareils radio de faible puissance,
pour plus de détails.
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Declaración de México:
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
No recibe señales de television digital.
English - 37
Regulatory Information - Tablet Remote
FCC Compliance Statement
VIZIO XR6P10 and XR6M10 Tablet Remotes are classied by the Federal
Communications Commission (FCC) as Class B digital devices.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV/display technician for
help.
English - 38
FCC Caution:
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Identication Information
The following information is provided on the device or devices covered in
this document in compliance with FCC regulations:
• Model number(s):
• FCC ID:
• Contact for FCC matters:
VIZIO, Inc.
39 Tesla
Irvine, CA 92618
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be co-located or
operated in conjunction with any other antenna or transmitter subject to
the conditions of the FCC Rules set forth above.
Exposure to Radio Frequency
This device transmits both WiFi and Bluetooth radio frequencies. WiFi
and Bluetooth devices emit radio frequency electromagnetic energy like
other radio devices. While the level of energy is less than other wireless
devices (such as mobile phones), you are advised to use the wireless
equipment in such a manner that the potential for human contact during
normal operation is minimized.
Wireless Radio Use
This device is restricted to indoor use when operating in the 2.4 to 5.0
GHz frequency band.
Canada Notice for License-Exempt Radio Apparatus
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme aux CNR exempts de licence d’Industrie
Canada. . Son fonctionnement est sujet aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Declaración de México
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación
no deseada.
English - 39
Limited Warranty
UNITED STATES AND CANADA
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS
WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY
CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE
VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT
FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
This warranty contains a binding arbitration agreement and a class action waiver for United
States residents. If you live in the United States, the binding arbitration agreement and class
action waiver aect your rights under this warranty. Please read the text under the section
titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” carefully.
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set forth below for one
(1) year from the date of original purchase. For commercial use, VIZIO warrants this product
on the terms set forth below for ninety (90) days from the date of original purchase.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the
product is used normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new
product. The purchase must have been made from an authorized retailer in the United
States (including Puerto Rico) or Canada. The product must also be located in the country
where it was purchased at the time of warranty service.
Zero Bright Pixel Defect Guarantee (Displays Only)
Your product may qualify for a warranty against “zero bright pixel” defects for the duration
of the warranty on select new product purchases. To determine if this guarantee applies to
your product, refer to the model’s product information page at www.vizio.com, look for the
“zero bright pixel” guarantee on the box, or contact VIZIO Technical Support at the email
address or telephone number below.
How to Get Service
Before obtaining warranty service, you may visit www.vizio.com for additional help and
troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email at
TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946). The VIZIO Technical
Support hours are 6:00AM to 9:00PM Monday through Friday and 7:00AM to 4:00PM
Saturday and Sunday, Pacic Time.
Your Obligations Before Service
You must obtain pre-authorization before sending your product to a VIZIO service center.
You may be required to supply a purchase receipt (or copy) to show that the product is
within the warranty period.
When you return a product to a VIZIO service center, you must ship the product in its
original packaging or in packaging that aords an equal degree of protection. VIZIO
Technical Support will provide instructions for packing and shipping the product to the
English - 40
VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE
DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If
this occurs, your product will be restored to its original state. You will be responsible for
restoring all applicable user data and downloaded applications. Recovery and reinstallation
of user data and downloaded applications is not covered under this warranty. In order to
protect your personal information, VIZIO recommends that you always clear all personal
information from the product before it is serviced, regardless of the servicer.
VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair
or replace it, or refund the purchase price to you. There will be no charge for parts or labor
during the warranty period. Replacement parts may be new or recertied at VIZIO’s option
and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining
portion of the original warranty or for ninety (90) days from warranty service, whichever
is longer.
Types of Service
Displays that are 32 inches or larger will usually be serviced in-home. In-home service
requires complete and easy access to the product and does not include de-installation or
re-installation of the product. In-home service is subject to availability. VIZIO will provide
other service options when in-home service is not available.
All other VIZIO products must be sent to a VIZIO service center to obtain warranty service.
VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover
return shipping to the customer.
What This Warranty Does Not Cover
This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper
operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from
shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation,
set-up, or repairs attempted by anyone other than by a VIZIO authorized service center;
(j) products with unreadable or removed serial numbers; (k) products requiring routine
maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a
non-authorized reseller.
What to Do If You Are Not Satised With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve
the issue informally with VIZIO. If you are unable to resolve the issue informally and wish
to le a formal claim against VIZIO, and if you are a resident of the United States, you must
submit your claim to binding arbitration according to the procedures described below,
unless an exception applies. Submitting a claim to binding arbitration means that you do
not have the right to have your claim heard by a judge or jury. Instead your claim will be
heard by a neutral arbitrator.
Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE
OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY
TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR
RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S
SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION
ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY
A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN
ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY
PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the
American Arbitration Association and its rules for arbitration by visiting www.adr.org
or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or
international commerce, the Federal Arbitration Act will apply.
The ling fees to begin and carry out arbitration will be shared between you and VIZIO, but
in no event will your fees ever exceed the amount allowable by the American Arbitration
Association, at which point VIZIO will cover all additional administrative fees and expenses.
VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under
this warranty. If you are the prevailing party in an arbitration to which the Supplementary
Procedures for Consumer-Related Disputes applies, then you are entitled to recover
attorneys’ fees as the arbitrator may determine.
The dispute will be governed by the laws of the state or territory in which you resided at
the time of your purchase (if in the United States). The place of arbitration will be Irvine,
California, or your county of residence (if in the United States). The arbitrator will have no
authority to award punitive or other damages not measured by the prevailing party’s actual
damages, except as may be required by statute. The arbitrator will not award consequential
damages, and any award will be limited to monetary damages and will include no equitable
relief, injunction, or direction to any party other than the direction to pay a monetary
amount. Judgment on the award rendered by the arbitrator will be binding and nal,
except for any right of appeal provided by the Federal Arbitration Act, and may be entered
in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor
an arbitrator may disclose the existence, content, or results of any arbitration under this
warranty without the prior written consent of you and VIZIO.
ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED
SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE
RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE
ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY
ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH
ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL
PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.
Exceptions to Binding Arbitration Agreement and Class Action Waiver
IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND
CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of
the date that you purchased the product; (2) your written notication must be mailed to
VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notication
must include (a) your name, (b) your address, (c) the date you purchased the product, and
(d) a clear statement that you wish to opt out of the binding arbitration agreement and
class action waiver.
In addition, you may pursue a claim in small claims court in your county of residence (if in
the United States) or in Orange County, California. In such case the provisions of the section
titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.
Exclusions and Limitations
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS
WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA,
COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR
OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES
AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
How the Law Applies
This warranty gives you specic legal rights, and you may also have other rights, which vary
from state to state and province to province. This warranty applies to the greatest extent
permitted by applicable law.
General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other
than the class action waiver, is found to be unenforceable, that term will be severed from
this warranty and all other terms will remain in eect. If the class action waiver is found
to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class
Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum
extent not prohibited by law.
Changes to Warranty
This warranty may change without notice, but any change will not aect your original
warranty. Check www.vizio.com for the most current version.
English - 41
Legal Information
Software Licenses, Data and Privacy
All software is provided subject to software license agreements and you
agree that you will be bound by such license agreements in addition to other
applicable terms of use. Smart Interactivity has been enabled on your display,
but you may disable it in the settings menu. Data will be collected and used in
accordance with VIZIO’s Privacy Policy. By using the VIZIO products, you agree
to the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of
Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be
updated from time to time and are available to view at http://www.vizio.com/
terms and http://www.vizio.com/privacy, respectively.
Export Regulations
Customer acknowledges that the VIZIO products, which include technology
and software, are subject to customs and export control laws in the United
States (“US”). The products may also be subject to the customs and export
control laws and regulations of the country in which the products are
manufactured and/or received.
Internet Connectivity
Network conditions, environmental and other factors may negatively aect
connectivity and the resulting video quality, if any.
The applications and content of the applications pictured herein or described
in accompanying documentation may only be available in certain countries
or languages, may require additional fees or subscription charges, and may
be subject to future updates, modications or discontinuation without notice.
VIZIO has no control over third party applications or content and assumes no
responsibility for the availability or interruption of such applications or content.
Additional third party terms, conditions and restrictions apply. Information in
this Quick Start Guide is subject to change without notice. To review the most
updated version of this Quick Start Guide and the associated User Manual, go to
http://www.vizio.com.
This Quick Start Guide may not be copied in whole or in part without the
written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable eorts
to ensure the accuracy of the information provided herein. All product
specications, functionality, features, congurations, performance, design
and other product information described herein are subject to change
without notice. VIZIO, Inc. is not responsible for typographical, technical, or
descriptive errors.
VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks
or registered trademarks of VIZIO, Inc.
HDMI, HDMI High-Denition Multimedia Interface,
and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. Used
Other names of companies, products, and services used in this Quick Start
Guide may be trademarks, trade names or service marks of others and
VIZIO, Inc. dis- claims any interest in trademarks, trade names or service
marks other than its own. Mention of non-VIZIO products is for informational
purposes only.
Caution: Avoid exposing a drive to magnetic elds. Security
devices with magnetic elds may include airport walk-through
devices and security wands. Airport conveyor belts or similar
security devices that check carry-on luggage generally use
X-rays and should not cause magnetic damage to drives.
If you are traveling internationally, check the customs
regulations for device use for each country you will visit, and
check the power cord and adapter requirements for each
location in which you plan to use the computer as voltage,
frequency and plug congurations may vary.
Warning: To reduce risk of electric shock, re or damage to
your device or other property, do not attempt to power the
device with a voltage converter kit sold
for appliances.
Battery Disposal
Caution: Battery cells may explode. Do not dispose of
the battery in a re or with ordinary household waste.
Dispose of or recycle batteries promptly. Replace the
battery only with the same or equivalent type of battery
recommended by VIZIO. For more information on recycling
or properly disposing of your batteries please go to
www.vizio.com/environment.
Always properly dispose of your VIZIO electronic products. For information
on how to properly dispose of or recycle your VIZIO products please go to
www.vizio.com/environment.