Vizio P42HD - 42"" Plasma TV, P42 ED, P42 HD User Manual
Table of Contents
Chapter 1 - Introduction ................................................................................................................................2
1.1 - Before Use ......................................................................................................................................... 2
1.2 - Specifications ..................................................................................................................................... 2
1.3 - Opening the Package......................................................................................................................... 3
1.4 - Installation.......................................................................................................................................... 3
1.4.1 - Image Sticking............................................................................................................................ 3
1.5 - Important Safety Guidelines............................................................................................................... 4
1.6 - Television Antenna Connection Protection ........................................................................................ 5
1.7 - Package Contents.............................................................................................................................. 6
1.8 - Front Panel Controls .......................................................................................................................... 7
1.9 - Rear Panel Connections .................................................................................................................... 8
1.10 - VIZIO Universal Remote Control...................................................................................................... 9
1.10.1 - Key Remote Control Functions................................................................................................10
1.10.2 - Insertion of Batteries in the Remote Control............................................................................12
1.10.3 - Remote Control Range............................................................................................................13
1.10.4 - Precautions for the VIZIO Universal Remote Control ..............................................................13
Chapter 2 - Connecting Components.........................................................................................................14
2.1 - Which Video Connection Should I Use? ...........................................................................................14
2.2 - Connecting Your DVD Player............................................................................................................15
2.2.1 - Using Digital Video ....................................................................................................................15
2.2.2 - Using Component Video ...........................................................................................................16
2.2.3 - Using S-Video ...........................................................................................................................17
2.2.4 - Using Composite Video.............................................................................................................18
2.3 - Connecting Your HDTV Set-Top Box................................................................................................19
2.3.1 - Using Digital Video ....................................................................................................................19
2.3.2 - Using RGB Video ........................................................................................................
..............20
2.4 - Connecting Your VCR or Video Camera...........................................................................................20
2.5 - Connecting Coaxial (RF)...................................................................................................................21
2.5.1 - Using Your Antenna or Cable TV ..............................................................................................21
2.5.2 - Using the Antenna through Your VCR.......................................................................................21
2.6 - Connecting External Amplified Speakers ..........................................................................................22
2.7 - Connecting an External Receiver or Amplifier...................................................................................23
2.8 - Connecting a Computer ....................................................................................................................24
Chapter 3 - Getting Started .........................................................................................................................25
3.1 - Turning your Plasma TV On and Off .................................................................................................25
3.2 - Preparing the Plasma for Wall Mounting...........................................................................................25
3.3 - Adjusting Basic Plasma TV Settings .................................................................................................26
3.4 - Using the On-Screen Display (OSD).................................................................................................27
3.4.1 - Menu Operations.......................................................................................................................27
3.4.2 - OSD Menus and Options ..........................................................................................................28
3.4.3 - Using the Parental Controls ......................................................................................................32
3.4.4 - Setting a Password ...................................................................................................................33
3.5 - Remote Control Operation ................................................................................................................34
3.5.1 - Programming the VIZIO Universal Remote Control...................................................................34
3.5.2 - Searching for Component Codes ..............................................................................................36
3.5.3 - Reassigning Component Buttons ..............................................................................................36
3.5.4 - Changing Volume Lock .............................................................................................................36
Chapter 4 - Maintenance and Troubleshooting.........................................................................................37
4.1 - Maintenance.................................................................................................................................37
4.2 - Troubleshooting Guide .................................................................................................................37
4.3 - Telephone & Technical Support ...................................................................................................38
4.4 - Compliance ...............................................................................................................
...................39
4.5 - FCC Class B Radio Frequency Interference Statement ...............................................................39
Appendix A: Limited Product Warranty.....................................................................................................40
Appendix B: Component Program Codes .................................................................................................41
Version - 2/21/2005 1
www.vizioce.com
Chapter 1 - Introduction
1.1 - Before Use
Congratulations on your VIZIO P42 42” Plasma Television purchase. Thank you for your support
of V, Inc. and its Plasma Television product line. The P42 is a precise electronic product and you
should read the following instructions carefully to maximize the performance of the product. It has
passed the Class-B EMC test and the UL and CSA safety certifications and you can be assured
of the highest quality display with the utmost reliability. After you have finished reading the
instructions, put them away in a safe place for future reference.
Note: In some countries or regions, the shape of the power plug and power outlet may
sometimes differ from that shown in the explanatory drawings. However the method of
connecting and operating the unit is the same.
1.2 - Specifications
P42 ED P42 HD
Panel 42", 16:9 Aspect Ratio
Resolution 852 x 480 1024 x 768
Pixel (Dot) Pitch 1.08 mm x 1.08 mm (H x V) 0.90 mm x 0.676 mm (H x V)
Display Compatibility EDTV (480p) HDTV (720p)
Signal Compatibility 480i (SDTV), 480p (EDTV), 720p (HDTV), 1080i (HDTV)
Brightness 1000 cd/m2 1000 cd/m2
Contrast 2000:1 typical 3000:1 typical
Viewing Angle >160 degrees (horizontal and vertical)
2 x Composite Video (2 x RCA), 2 x S-Video (1 x 4-pin DIN), 1 x
Component (3 x RCA, YCbCr Video) & 1 x Component (3 x RCA,
YPbPr Video), 1 x Digital Video (1 x DVI), 1 x Analog RGB (1 x 15-pin
D-Sub), 4 x Audio (2 x RCA, Left + Right), 1 x RF (1 x F Connector for
Inputs
Output 1 x Stereo Audio (1 x RCA, L & R), 1 x subwoofer (1 x RCA)
Component YPbPr, VGA or DVI, HDTV via Component YPbPr, VGA or
Features
Interface 1 x RS232 (9-pin D-sub)
Speakers 2 x 15W
Power
Input IEC Connector for direct power line connection
Voltage Range 100 - 240 Vac at 50/60 Hz.
Power Consumption 360 W average 440 W average
Dimensions
Net Weight 85 lbs w/stand and speakers
Gross Weight 115.8 lbs w/stand and speakers
Certifications UL, C-UL, FCC Class B
internal NTSC Tuner), 1 x Audio (1 x Stereo Mini Jack)
PiP, POP, CC, V-Chip, 3D Comb Filter, 3:2 Pull Down, Gamma
Correction, Scalar and De-interlacer, NTSC Video decoding via RF
(Antenna, Cable or Satellite [Set top box may be required]) or Video
(CVBS, S-Video or Component YCbCr), Progressive Scan Video via
DVI (Set top box may be required), Computer 640x480, 800x600,
1024x768 via VGA or DVI, SRS and BBE Sound enhancement.
40.9" x 25.45" x 5.2" w/o stand or speakers; 48.65" x 27.2" x 10.6"
w/stand and speakers
Version - 7/21/2004
2
1.3 - Opening the Package
• The VIZIO P42 is packaged in a carton together with other standard accessories. Any
optional accessories are packed separately in another carton.
• The weight of the Plasma Display is approximately 85 lbs. Due to the size and weight of the
product, it is recommended that it be handled by a minimum of 2 persons.
• The protective glass and the glass substrate are installed on the front of the product. Since
both glasses can be easily scratched or broken, please handle the product gently. Never
place the unit on a surface with the glass facing downwards unless it is on protective
padding.
• When opening the carton, check that the product is in good condition and that all standard
accessories and items are included.
• Save the original box and all packing materials for future shipping needs.
1.4 - Installation
• Please read the user manual carefully before performing the installation.
• The power consumption of the display is approximately 360 Watts for EDTV or 440 W for
HDTV, significantly higher than a typical television. Please use the power cord designated for
the product. When an extension cord is required, use one with the correct power rating. The
cord must be grounded and the grounding feature must not be defeated.
• The product should be installed on a flat surface to avoid tipping. Space should be
maintained between the back of the product and the wall for proper ventilation. See Section
3.2 - Preparing the Plasma for Wall Mounting, p. 25, for additional information.
• Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or
smoke, so as not to shorten the service life of the electronic components.
• Please ensure the product is installed with the screen in landscape orientation. Any 90°
clockwise or counterclockwise installation may induce poor ventilation and subsequent
component damage.
• To protect the screen and avoid screen burn, do not keep a static picture displayed for a
prolonged period of time. This can result in "image sticking" (see below for additional details)
of the image and is not covered by the warranty.
1.4.1 - Image Sticking
The Plasma monitor illuminates phosphors to display images which have a finite illumination
life. After extended periods of illumination, the brightness of the phosphor will be degraded to
such an extent that stationary images would burn-in that part of the screen. Displaying the
same stationary patterns such as black bars, stock tickers, video games or shopping channel
logos and pricing displays, over extended periods of time can leave this type of permanent
image sticking. You can avoid this by mixing your viewing patterns. Do not show the same
stationary image for more than 15% of the total TV viewing in any one week.
NOTE: "Image Sticking" constitutes misuse and is NOT COVERED by the manufacturer's
warranty.
For additional information, please refer to Section 3.4.2.7, page 31 for using the panel
protection feature.
Version - 2/21/2005 3
www.vizioce.com
1.5 - Important Safety Guidelines
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire.
To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future
reference.
• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the P42
Plasma TV.
• Unplug the power cord before cleaning the P42 Plasma TV. A damp cloth is sufficient for cleaning the P42 Plasma TV. Do not
use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the P42 Plasma TV from an area of low temperature to an area of high temperature, condensation may form on
the housing. Do not turn on the P42 Plasma TV immediately after this to avoid causing fire, electric shock or component
damage.
• Do not place the P42 Plasma TV on an unstable cart, stand, or table. If the P42 Plasma TV falls, it can injure a person and
cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the P42
Plasma TV.
• A distance of at least 3 feet should be maintained between the P42 Plasma TV and any heat source, i.e. radiator, heater,
oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause
fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the P42
Plasma TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the P42
Plasma TV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slot on the P42 Plasma TV cabinet. Do not place any objects on the top of the product. It could
short circuit parts causing a fire or electric shock. Never spill liquids on the P42 Plasma TV.
• The P42 Plasma TV should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information,
contact your dealer.
• The P42 Plasma TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only
into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician
install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded
plug.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket shall be installed near the equipment and shall be easily accessible.
• Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or
electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the P42 Plasma
TV from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high
voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to
qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact
your dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components
may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the
product may cause fire or electric shock.
• Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust
or high humidity may cause fire or electric shock.
• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before
moving the product.
• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the
cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power
connector.
• To avoid risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator
injury and contamination the remote controller.
• If any of the following occurs please contact the dealer:
• Operating environment: Temperature: 32°F~104°F (0°C ~ 40°C), Humidity: 20% to 85% non-condensing
Version - 2/21/2005 4
o The power connector fails or frays.
o Liquid sprays or any object drops into the P42 Plasma TV.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
www.vizioce.com
1.6 - Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the Plasma TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of the grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the Plasma TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the Plasma TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
Version - 2/21/2005 5
www.vizioce.com
1.7 - Package Contents
VIZIO P42 Plasma TV
VIZIO Universal Remote Control
42 mm Stand-Off Screws for the Bottom of the TV – 2 QTY
55 mm Stand-Off Screws for the Top of the TV – 2 QTY
Power Cord
RCA Cable
This User Guide
IMPORTANT: Save the original box and all the packing material for future shipping needs.
Note: Your product may also include various other accessories depending on region of
purchase.
Version - 2/21/2005 6
www.vizioce.com
1.8 - Front Panel Controls
Volume ◄/► - These buttons are used to increase or decrease the speaker volume. While the
OSD is active, these buttons function as adjustment controls in the OSD menus.
Channel d/c – These buttons are used to increase or decrease the selected channels. While
the OSD is active, these buttons function as select controls in the OSD menus.
Input - Repeated pressing of this button steps through the input sources in sequence. Once you
have stepped through the entire sequence, you will return to the beginning.
Remote Control Sensor – This is the window that passes all of the remote signals to the sensor.
Point the remote control directly at this window for the best response to the remote signal.
Power LED - Lights green when powered on.
Power - Switch the TV on by pressing the button once. Press the button again to turn the TV off.
Version - 2/21/2005 7
www.vizioce.com
1.9 - Rear Panel Connections
1 2 3 4 5 6 7
14 15 16 17 18 19 20
8 9 10 11 12 13
1. RF (TV Input) – Connect to the antenna, satellite or cable service
2. Component (YPbPr) Input - Connect the external video devices with component output,
such as a DVD player or set-top box.
3. Audio In, Right and Left (R/L) – Connect the external audio from the component video
source such as a DVD player or set-top box.
4. S-Video1 – Connect the S-Video to external video device such as VCR, DVD and video
games.
5. Video1 – Connect the composite video to external video device such as VCR, DVD and
video games.
6. Audio In, Right and Left (R/L) – Connect the external audio from the S-Video or
composite video source such as a VCR or DVD player.
7. Audio Out, Left and Right (L/R) – Connect the audio from the Plasma to an external
amplifier.
8. Component (YCbCr) Input - Connect the external video devices with component output,
such as a DVD player or set-top box.
9. Audio In, Right and Left (R/L) – Connect the external audio from the component video
source such as a DVD player or set-top box.
10. S-Video2 – Connect the S-Video to external video device such as VCR, DVD and video
games.
11. Video2 – Connect the composite video (yellow) to external video device such as VCR,
DVD and video games.
12. Audio In, Right and Left (R/L) – Connect the external audio from the S-Video or
composite video source such as a VCR or DVD player.
13. Subwoofer – Connect an external subwoofer to Plasma.
14. Speaker Jacks – Connect speakers to Plasma.
15. DVI HDTV In – Connect a DVD multimedia player, computer or set-top box through the
20-pin connection. This is a digital only connector.
16. DVI HDTV / RGB PC Audio In – Connect the audio from a computer, DVD multimedia
player or set-top box.
17. RGB PC In – Connect the video from a computer or set-top box.
18. RS232 – To be used for factory service and support.
19. AC In – Connect one end of the power cord here and connect the other end of the power
cord to a wall socket.
20. Main Power Switch – Turn the AC In power on/off.
Version - 2/21/2005 8
www.vizioce.com
1.10 - VIZIO Universal Remote Control
8
9
9
0
6
528
3
3
35 36
5
6
3
30 33 3
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to
four different components. The remote control button functions are explained on the following
pages.
VIZIO Universal Remote Control Button Description
1
4
2
7
11
18
15
26
12
23
29
20
13
17
24
27
4
1
14
1
1
22
1
2
21
2
Version - 2/21/2005 9
www.vizioce.com
1.10.1 - Key Remote Control Functions
1. SETUP - This button starts all programming sequences.
2. Remote LED – Blinks when the remote is being programmed or is
sending a signal to your Plasma Display.
3. POWER - Press this key to turn the Plasma Display On from
Standby mode. Press it again to return to the Standby mode.
4. AUX – This button selects a programmed component.
5. CBL – This button selects a programmed cable TV set-top box or selects a programmed
satellite TV set-top box.
6. VCR – This button selects a programmed VCR.
7. TV – This button selects a programmed TV. Pre-programmed for the VIZIO P42 Plasma
TV.
8. Number Button Pad – These buttons select a channel or
password.
9. MUTE – This button turns the sound on and off.
10. 100/Enter – This button enters a channel number greater than 100
in TV mode. Additionally, it works as an ENTER button in other
video modes.
11. VOL (+ or -) – These buttons turn volume up or down.
12. LAST – This button recalls the previously viewed channel.
13. INPUT – This button changes the input source.
14. CH (+ or -) – These buttons change the channels up or down.
15. WIDE/GUIDE – This button cycles through standard and
widescreen viewing modes or accesses programming guides, such
as the one that comes with a satellite dish. GUIDE does not work
in TV mode.
16. FAV/EXIT – This button exits the component, guide or OSD
menus. Additionally, it retrieves your favorite channels in TV
mode.
dcfe - These buttons navigate the on-screen display (OSD)
menus.
17. SELECT – This button works to select your chosen options in on-screen display (OSD)
menus.
18. INFO – This button turns the image and system information display On or Off.
19. MENU – This button is used to select the OSD menu pages in the following sequence:
PictureDAudioDSourceDGraphicDTVDClockDSetup
Version - 2/21/2005 10
www.vizioce.com
20. Reverse/AV1 – This button rewinds the CD, DVD or VCR
when the component is activated with the remote control.
Additionally, this button will select the AV1 component in TV
mode.
21. Play/SVid1 – This button plays the CD, DVD or VCR when the
component is activated with the remote control. Additionally,
this button will select the SVid1 component in TV mode.
22. Forward/YPbPr – This button forwards the CD, DVD or VCR when the component is
activated with the remote control. Additionally, this button will select the YPbPr
component in TV mode.
23. Record/AV2 – This button functions as a VCR Record when the component is activated
with the remote control. Additionally, this button will select the AV2 component in TV
mode.
24. Stop/DVI – This button stops the CD, DVD or VCR when the component is activated with
the remote control. Additionally, this button will select the DVI component in TV mode.
25. Pause/YCbCr – This button pauses the CD, DVD or VCR when the component is
activated with the remote control. Additionally, this button will select the YCbCr
component in TV mode.
26. ZOOM - Use this key to zoom the image in or out.
27. Swap – Used to swap the inputs from the main and PiP or
POP picture mode.
28. –SubCh+ - These buttons are used to select the channels
within the PIP.
29. PIP – Use this key to activate the picture-in-picture mode.
30. FREEZE – Press this key to "Freeze-Frame", the current
screen. You may press this key again to continue playing or
play will resume automatically after one minute.
31. POP – Use this key to activate the picture-on-picture mode.
32. MTS – Press this key to select Stereo, SAP (separate audio program) or Mono audio.
This function is available in the TV mode.
33. CC – Press this key to select closed caption options.
34. Sleep – Press this key to select the sleep options. User can adjust the sleep timer in 5
minute increments.
35. VGA – This button selects a programmed VGA display.
36. TV - This button selects a programmed TV. Pre-programmed for the VIZIO P42 Plasma
TV.
Note: The remote control layout is for reference only.
Version - 2/21/2005 11
www.vizioce.com
1.10.2 - Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols
on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the
battery cover.
Precautionary Tips for Inserting the Batteries:
• Only use the specified AA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage that may pose a
fire risk or lead to personal injury.
• Inserting the batteries incorrectly may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
• Dispose of the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
Version - 2/21/2005 12
www.vizioce.com
1.10.3 - Remote Control Range
• Point the remote control at the remote control sensor to transmit the commands.
• Do not place any obstacles between the remote control and the receiver window.
• The effective range of the remote control is approximately 32 feet (10 meters) from the
front of the receiver window, 30º to the left and right, 20º up and down.
1.10.4 - Precautions for the VIZIO Universal Remote Control
• Remote control should be kept dry and away from heat sources. Avoid humidity.
• If the display responds erratically to the remote control or does not respond at all, check
the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
• When not using the remote control for a long period of time, remove the batteries.
• Do not take apart the batteries, heat them, or throw them into a fire.
• Do not subject the remote control to undue physical stress, such as striking or dropping it.
• Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp cloth.
Version - 2/21/2005 13
www.vizioce.com
Loading...