Vizio HLS38UL2-8 User Manual

Low Frequency Loudspeaker
HLS38UL2-8, HLS38UL216
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
APPEARANCE
unit : mm
7x15(8 places) 8 equally spaced at 45
High sound quality, high efficiency, high durability, and low distortion. Magnetic circuit employing a large, 200 mm diameter ferrite magnet reproduces powerful low frequencies.
Ultra linearity in super low frequencies assures the cone displacement limit of 40 mm (peak-to-peak). The bobbin and the voice coil are designed with emphasis on the heat radiation and mechanical strength, achieving high power handling capacity (500 W).
Linear displacement characteristics thanks to high damping materials incorporated in the edge and resin-reinforced
cone.
TOA Corporation
SPECIFICATIONS
Specifications
Diameter: 380 mm
Rated Impedance
HLS38UL2-8 : 8 HLS38UL216 : 16
Power Handling Capacity * Sensitivity *
2
: 98 dB (1 W/1 m)
1
: 500 W continuous pink noise
Frequency Range : 30 to 3,000 Hz Highest Recommended Crossover Frequency : 1,000 Hz Effective Piston Diameter : 330 mm
Displacement Limit (p-p) : 40 m m
Minimum Impedance
HLS38UL2-8 : 8.0 ±1 0 % (25 °C)
HLS38UL216 : 16.0 ±10% (25 °C)
Voice Coil Diameter : 72 mm Voice Coil Material : Edgewound copper ribbon Voice Coil Winding Depth : 25 mm
Top-plate Thickness : 10 mm
Bl Factor
HLS38UL2-8 : 2 1.1 N/A
HLS38UL216
: 27.3 N/A
Effective Moving Mass : 0.090 kg
Flux Density : 16,000 gauss
Polarity : Positive voltage on plus (RED) terminal generates
the positive sound pressure. Front External Diameter : 407 mm Diameter between mounting holes : 370 m m Baffle Cutout Diameter
Front Mount : 354 mm Rear Mount : 350 mm
Depth : 186 mm
Loudspeaker Volume : 6 lit.
Weight : 12 kg
Thiele-small Parameters
Fs : 40 Hz Re
HLS38UL2-8 : 5 .8 HLS38UL216
Qts :
0.26
Qms
: 2.3 Qes : 0.29 Vas : 180 lit. Sd : 0.086 m
Xmax : 7.7 mm Vd : 660 cm
o(Half space) : 3.9%
Pe(Max) : 500 W continuous pin k noise
Accessories
Screw/washer assembly and nuts
*1 AES Standard (60 to 600 Hz)
*2 Based on a band-limited (100 to 800 Hz) pink noise
signal.
Note: The design and specifications are subject to
change without notice for improvement.
: 11.6
2
3
8 each
FREQUENCY RESPONSE
Frequency Response and Impedance Curve
Measuring Condition
Measuring environment: Anechoic chamber Measurement distance: 1 m on the forward axis Input signal: 1 W sine wave Enclosure: 120-liter sealed box. (The impedance
curve has been obtained by measuring
the naked speaker.)
Distortion Response
Input signal: Sine wave of 50 W (1/10 of power handling
capacity.)
TOA Corporation
Printed in Japan
133-01-397-3A
Loading...
+ 4 hidden pages