Vizio HDX20L Quick Setup Manual

Figure A

Congratulations on your recent VIZIO HDX 20L 20” LCD TV and AVF (Accent View
Frame) purchases.

To help you install your new AVF, please follow the 5 Quick Steps below.

1. Place the TV on a flat, stable surface directly in front of you.

2. Grasp the top corners of the bezel indicated by the red circles in
Figure A, and pull the existing AVF towards you away from the metal
frame. The AVF which is held together by magnets will easily detach
from the TV.

3. At approximately 30 degrees angle of tilt, lift the AVF away from the
TV frame.

4. Unwrap the new AVF and gently place the bottom of it into the open
slot of the TV. Please make sure to line up the front menu buttons
with the holes in the AVF for proper placement.

5. Secure the bezel to the TV by rotating it upwards into place. The AVF will
“snap” securely onto the TV fitting snugly in place.

If you need additional assistance, VIZIO’s service representatives are dedicated to assist
you with the utmost in customer satisfaction. To better assist you, please call or contact
us via email.

Tel: [phone], 7am-4pm PST Mon - Fri

E-mail: [e-mail]

Website: www.vizioce.com