Vizio GV47L User Manual 2
VIZIO GV47L FHD TV User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO GV47L
FullHD LCD Television purchase. Thank you for
your support. For maximum benefit of your set,
please read these instructions before making any
adjustments, and retain them for future reference.
We hope you will experience many years of
enjoyment from your new VIZIO GV47L FullHD
Television.
For assistance, please call 949-668-0588 or email us at
techsupport@vinc.com.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at
www.vizioce.com or
call toll free at 888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO GV47L
FHD TV either at our website
www.vizioce.com
or fill in your registration card and mail it in. For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers onsite extended warranty service plans. These
plans give additional coverage during the
standard warranty period. Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your GV47L.
__ __ __ __ __ __ __ __ __ __ __ __ __
L
Purchase Date _____________________
VIZIO is a registered trademark of V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Version 8/3/2007 1
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation,
use and maintenance of the product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
! To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the GV47L LCD
HDTV.
! Unplug the power cord before cleaning the GV47L LCD HDTV. A damp cloth is sufficient for cleaning the GV47L LCD HDTV. Do not
use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
! Always use the accessories recommended by the manufacturer to insure compatibility.
! When moving the GV47L LCD HDTV from an area of low temperature to an area of high temperature, condensation may form on the
housing. Do not turn on the GV47L LCD HDTV immediately after this to avoid causing fire, electric shock or component damage.
! Do not place the GV47L LCD HDTV on an unstable cart, stand, or table. If the GV47L LCD HDTV falls, it can injure a person and
cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the GV47L LCD
HDTV.
! A distance of at least 3 feet should be maintained between the GV47L LCD HDTV and any heat source, i.e. radiator, heater, oven,
amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric
shock.
! Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the GV47L LCD
HDTV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the GV47L LCD HDTV in a
bookcase or cabinet unless proper ventilation is provided.
! Never push any object into the slot on the GV47L LCD HDTV cabinet. Do not place any objects on the top of the product. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the GV47L LCD HDTV.
! The GV47L LCD HDTV should be operated only from the type of power source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power company.
! The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact
your dealer.
! The GV47L LCD HDTV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only
into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install
the correct outlet, or use an adapter to ground the appliance safely.
grounded plug.
! Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
! The wall socket shall be installed near the equipment and shall be easily accessible.
! Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric
shock.
! Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
! Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the GV47L LCD HDTV
from damage due to power surges.
! Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk
of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service
personnel.
! Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug
the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
! Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair the product yourself.
! Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause
fire or electric shock.
! Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high
humidity may cause fire or electric shock.
! Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the
product.
! Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and
cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
! To avoid risk of electric shock, do not touch the connector with wet hands.
! Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote controller.
! If any of the following occurs please contact the dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into the GV47L LCD HDTV.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
! Operating environment. Temperature: 40˚F ~ 95˚F, Humidity: 10% ~ 90% non-condensing, Altitude: 0 ~ 6500ft (0 ~ 2000m)
Do not defeat the safety purpose of the
Version 8/3/2007 2
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long
periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power
lines or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building
installation.
Version 8/3/2007 3
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Opening the Package
Your VIZIO GV47L FHD TV and it accompanying accessories are carefully packed in a cardboard carton
that has been designed to protect it from transportation damage. Now you have opened the carton check
that the GV47L FHD TV is in good condition and that all of the accessories are included.
The GV47L FHD TV weighs approximately 90lb and about 45” wide x 32” tall we strongly advise that you
have at least 2 people to unpack and install the HDTV.
The glass surface can easily be scratched or broken so please handle the product gently and never place
the HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO GV47L FHD TV
VIZIO Remote Control by Universal Electronics
AV Cable (Yellow, Red and White Connectors)
Power Cord
Safety Strap
VIZIO Bezel and Screen Cleaning Cloth
This User Manual
Quick Setup Guide
Registration Card
VIP Services Brochure
Version 8/3/2007 4
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Additional Certified Accessories for the VIZIO
GV47L FHD TV are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO GV47L FHD TV
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
site at www.vizioce.com
or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 280W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIOCE (888-849-4623) or www.vizioce.com
.
Version 8/3/2007 5
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Preparing Your LCD HDTV for Wall Mounting
The VIZIO GV47LHDTV can either be kept on the stand base or mounted on the wall for viewing. If you
choose to mount the GV47LHDTV on the wall, please follow the instructions below for removing the stand
base.
To remove the stand base
1. Unplug all of the cables and cords from
your GV47LHDTV.
2. Place the GV47LHDTV face down on a
soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3. Pull the stand cover off by squeezing the
sides to release the retaining plastic tabs.
4. Remove the four (4) screws so that the stand base can
be removed.
5. Gently remove the
stand base.
6. Now, the GV47LHDTV can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back
panel of the TV. Please make sure to
read the instructions of your specific
mount to properly hang the GV47LHDTV.
The pitch of the mounting holes is 630mm
horizontally and 200mm vertically.
The screw type required is metric M8,
1.25mm pitch.
To find the perfect mount for the VIZIO GV47LHDTV, browse VIZIO’s certified mount selection at
www.vizio.com
or call directly 888-VIZIOCE (888-849-4623).
Version 8/3/2007 6
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
To remove the speakers
If you wish to remove the attached speakers as well and use your Home Theatre System for the audio
please see the following procedure.
1. Unplug the speaker wires from the
GV47L at the rear of the TV.
1 2 3 4
2. Remove the four (4) screws that hold the right speaker in place and remove the four (4)
screws that hold the left speaker in place. The screws are identified by arrows molded into
the plastic.
3. Remove the aluminum nameplate
from the front of the TV, between the
speakers. Please make sure no to use
excessive force since there are clips
holding the plate which could break.
4. Repeat step 2 for the left speaker.
After removing speaker, the screws
could be left in place for future use if
speaker needs to be reinstalled.
Note: Do not attempt to remove the nameplate without removing one of the speakers beforehand; plate
will be easily removed after step 2 is done.
Version 8/3/2007 7
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Table of Contents
Chapter 1 Basic Controls and Connections ................................................................10
1.1 Front Bezel........................................................................................................................................................10
1.2 Sensor Touch Controls......................................................................................................................................10
1.3 Rear Panel Connections ...................................................................................................................................11
1.4 VIZIO Universal Remote Control .......................................................................................................................13
1.4.1 Insertion of Batteries in the Remote Control ..............................................................................................15
1.4.2 Remote Control Range ..............................................................................................................................15
1.4.3 VIZIO Universal Remote Control Precautions ...........................................................................................15
Chapter 2 Connecting Equipment .................................................................................. 16
2.1 Which Video Connection Should I Use?............................................................................................................16
2.2 Connecting Your Cable or Satellite Box ............................................................................................................17
2.2.1 Using HDMI ...............................................................................................................................................17
2.2.2 Using Component Video............................................................................................................................19
2.3 Connecting Coaxial (RF) ...................................................................................................................................20
2.3.1 Using Your Antenna or Digital Cable for DTV............................................................................................20
2.3.2 Using Your Antenna or Cable for TV .........................................................................................................21
2.3.3 Using the Antenna or Cable through your VCR .........................................................................................21
2.4 Connecting Your DVD Player............................................................................................................................22
2.4.1 Using HDMI ...............................................................................................................................................22
2.4.2 Using Component Video............................................................................................................................24
2.4.3 Using S-Video (AV2)..................................................................................................................................25
2.4.4 Using Composite (AV) Video .....................................................................................................................26
2.5 Connecting Your VCR or Video Camera ...........................................................................................................27
2.6 Connecting an external Receiver/Amp ..............................................................................................................28
2.7 Connecting a PC Computer ..............................................................................................................................29
Chapter 3 Setting Up to Watch Television................................................................... 30
3.1 Basic LCD HDTV Start Up ................................................................................................................................30
3.2 Watching a TV Program ....................................................................................................................................32
3.3 Adjusting Basic LCD HDTV Settings .................................................................................................................32
3.4 Program Information..........................................................................................................................................33
3.5 Information on LCD HDTV Status .....................................................................................................................34
3.5.1 No PIP or POP ..........................................................................................................................................34
3.5.2 With PIP and POP .....................................................................................................................................36
Chapter 4 Advanced Adjustment of HDTV ................................................................... 38
4.1 Using the On Screen Display (OSD) .................................................................................................................38
4.2 DTV / TV Input Picture Adjustment....................................................................................................................39
4.2.1 Picture Mode .............................................................................................................................................39
4.2.2 Backlight ....................................................................................................................................................39
4.2.3 Contrast .....................................................................................................................................................40
4.2.4 Brightness..................................................................................................................................................40
4.2.5 Color ..........................................................................................................................................................40
4.2.6 Tint.............................................................................................................................................................41
4.2.7 Sharpness .................................................................................................................................................41
4.2.8 Color Temperature.....................................................................................................................................41
4.3 Advanced Picture Adjust ...................................................................................................................................42
4.3.1 DNR...........................................................................................................................................................42
4.3.2 Black Level Extender .................................................................................................................................42
4.3.3 White Peak Limiter.....................................................................................................................................42
4.3.4 Color Transient Intensity............................................................................................................................42
4.3.5 Flesh Tone.................................................................................................................................................42
4.3.6 Dynamic Backlight .....................................................................................................................................42
4.3.7 Adaptive Luma...........................................................................................................................................42
4.4 DTV / TV Input Audio Adjustment......................................................................................................................43
4.4.1 Volume ......................................................................................................................................................43
4.4.2 Bass...........................................................................................................................................................43
4.4.3 Treble ........................................................................................................................................................43
4.4.4 Balance......................................................................................................................................................43
4.4.5 Surround....................................................................................................................................................44
4.4.6 Speakers ...................................................................................................................................................44
Version 8/3/2007 8
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
4.5 DTV / TV Input Special Features.......................................................................................................................44
4.5.1 Language...................................................................................................................................................44
4.5.2 Sleep Timer ...............................................................................................................................................44
4.5.3 Analog Closed Caption ..............................................................................................................................44
4.5.4 Digital Closed Caption ...............................................................................................................................45
4.5.5 Digital Closed Caption Style ......................................................................................................................45
4.5.6 PIP Position ...............................................................................................................................................45
4.5.7 Reset All Settings ......................................................................................................................................45
4.6 TV Tuner Setup .................................................................................................................................................46
4.6.1 Tuner Mode ...............................................................................................................................................46
4.6.2 Auto Search...............................................................................................................................................46
4.6.3 Skip Channel .............................................................................................................................................46
4.7 DTV Tuner Setup ..............................................................................................................................................47
4.7.1 Tuner Mode ...............................................................................................................................................47
4.7.2 Auto Search...............................................................................................................................................47
4.7.3 Skip Channel .............................................................................................................................................47
4.7.4 Digital Audio Out........................................................................................................................................47
4.7.5 Time Zone .................................................................................................................................................48
4.7.6 Daylight Saving..........................................................................................................................................48
4.8 DTV / TV Input Parental Control........................................................................................................................48
4.8.1 Parental Lock Enable.................................................................................................................................48
4.8.2 TV Rating...................................................................................................................................................49
4.8.3 Movie Rating..............................................................................................................................................49
4.8.4 Blocked Unrated Programming..................................................................................................................50
4.8.5 Change the Password ...............................................................................................................................50
4.9 Video Input Picture Adjustment .........................................................................................................................51
4.10 Video Input Audio Adjustment .........................................................................................................................51
4.11 Video Input Special Features ..........................................................................................................................51
4.12 Video Input Parental Control ...........................................................................................................................52
4.13 PC Input Picture Adjustment ...........................................................................................................................52
4.13.1 Auto Adjust ..............................................................................................................................................52
4.13.2 H-SIZE.....................................................................................................................................................52
4.13.3 Horizontal Shift ........................................................................................................................................52
4.13.4 Vertical Shift ............................................................................................................................................52
4.13.5 Fine Tune ................................................................................................................................................52
4.14 PC Input Audio Adjustment .............................................................................................................................53
4.15 PC Input Special Features ..............................................................................................................................53
4.15.1 Understanding Viewing Features.............................................................................................................54
4.15.2 Viewing Modes ........................................................................................................................................54
4.15.3 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode.............................................................................55
4.15.4 Adjusting Basic PIP/POP Settings...........................................................................................................55
4.15.5 Setting the Sleep Timer ...........................................................................................................................56
4.16 Programming the VIZIO Universal Remote Control.........................................................................................57
4.16.1 Programming for VCR .............................................................................................................................57
4.16.2 Programming for Cable Set-Top Box.......................................................................................................57
4.16.3 Programming for DVD Player ..................................................................................................................58
4.16.4 Searching for Component Codes ............................................................................................................58
4.17 Using a Cable or Satellite Remote ..................................................................................................................58
Chapter 5 Maintenance and Troubleshooting.............................................................59
5.1 Maintenance...................................................................................................................................................... 59
5.2 Troubleshooting Guide ......................................................................................................................................59
5.3 Telephone & Technical Support ........................................................................................................................61
5.4 Compliance .......................................................................................................................................................62
5.5 FCC Class B Radio Interference Statement......................................................................................................62
Chapter 6 Miscellaneous Information ...........................................................................63
6.1 Specifications ....................................................................................................................................................63
6.2 Glossary – Standard Definitions ........................................................................................................................64
6.3 Index .................................................................................................................................................................65
6.4 Limited Product Warranty..................................................................................................................................67
6.4.1 VIZIO Extended Service Warranty.............................................................................................................67
6.5 Component Program Codes..............................................................................................................................68
Version 8/3/2007 9
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Bezel
Power ‘VIZIO’ light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Sensor Touch Controls
The GV47L FHD TV is equipped with Sensor Touch Controls that are hidden behind the bezel and
remain asleep until you need to use them.
Power (
and then press the power switch location once. Press again to turn the GV47LHDTV off.
Menu – This Control activates the On Screen Display (OSD). If a sub-menu is active, pressing this
Control will return to the previous menu level.
Channel +/- – Use these Controls to step up or down the TV channels. While the OSD is active, these
function as up and down controls in the OSD menus.
Volume +/- – Use these Controls to increase or decrease to the speaker volume. While the OSD is
active, these function as left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this Control steps through the input sources in the following
sequence: TV, AV1, AV2, Component 1, Component 2, RGB, HDMI 1 and HDMI 2. Once you have
stepped through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this Control confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
) – Switch the GV47LHDTV on by pressing the Sensor Touch area to activate the Controls
Version 8/3/2007 10
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
1.3 Rear Panel Connections
Left Portion
1. SPEAKER – Connection for right speaker.
2. AC IN – Plug-in the supplied AC Power Cord here.
3. DTV – Connect to an antenna or cable/digital cable for TV and Digital TV.*
4. OPTICAL DIGITAL AUDIO OUT – When the DTV input is selected for viewing, the digital
audio associated with digital programming will be available on this SPDIF Optical connector
for connection to your home theatre system. The gray color band on the rear of the TV
indicates this connection.
* For digital TV stations in your area visit www.antennaweb.org
1
2
3 4
.
Version 8/3/2007 11
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Right Portion
5 7
5. SERVICE – This custom communication port is for factory service only.
6. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. Your VIZIO Certified HDMI cables are available for purchase from
www.vizioce.com
7. HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. .
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.vizioce.com
8. RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection.
9. COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The green color band on the rear of the TV indicates this connection.
10. COMPONENT 2 (YPb/CbPr/Cr with Audio L/R) – Connect the secondary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The purple color band on the rear of the TV indicates this connection.
11. AV1 In – Connect the primary source for composite video devices, such as a VCR or video
game. Use the white and red connectors to connect the external audio from the same source.
The yellow color band on the rear of the TV indicates this connection.
12. AV2 In – Connect the secondary source for composite video devices, such as a VCR or
video game. Use the white and red connectors to connect the external audio from the same
source. The orange color band on the rear of the TV indicates this connection. The S-Video
connector in the red area is associated with AV2 and if connected will take priority over AV2
RCA connector.
13. Audio Out – Connect the audio from the LCD HDTV to an external device, such as a home
theatre system, external amplifier or stereo. Speakers cannot be connected directly to here.
The gray color band on the rear of the TV indicates this connection.
14. SPEAKER – Connection for left speaker.
8
or by calling 888-VIZIOCE (888-849-4623).
or by calling 888-VIZIOCE (888-849-4623).
9
10
12
11
12
13 6 14
Version 8/3/2007 12
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
1.4 VIZIO Universal Remote Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote button functions are explained on the following pages.
SET – This button starts all programming of the Remote Control.
Remote LED – Blinks when the remote operates.
POWER – Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
TV – This button has been pre-programmed to select the codes to operate
the GV47LHDTV.
VCR – This button selects a programmed VCR.
CABLE – This button selects a programmed cable TV set-top box or a
satellite TV set-top box.
DVD – This button selects a programmed DVD player.
Number Button Pad – Use these buttons to select a channel or enter a
password.
INPUT – This button allows the user to cycle through the inputs.
- / ENTER – This button works as a DASH button in the DTV mode. When
selecting a digital channel directly use this button for the separation of
main and sub-channels. For example, channel 28-2 would be selected by
the button sequence 2 8 ENTER 2.
CH (+ or -) – These buttons change the channels up or down.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off.
VOL (+ or -) – These buttons turn the volume up or down.
MENU – Use this button for the On-Screen Display (OSD) menus.
INFO – This button displays the image and system information display.
GUIDE – This button displays program information. Note: this button is
only functional for DTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
OK – Use this button to select your chosen option in On-Screen Display
(OSD) menus.
NOTE: This is a programmable remote supporting up to 4
devices (see TV, VCR, CABLE, DVD buttons at the top of
the remote). If the remote is not working with your VIZIO
TV, press the TV button on the remote to set the
functions back to TV.
Version 8/3/2007 13
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
WIDE/Record – This button cycles through the available screen formats. The options are Wide, Normal,
Zoom, Panoramic. Note: in RGB/PC mode the options are 4:3 and 16:9.
This button also functions as VCR Record when the component is activated
with the remote control.
SLEEP/Pause – This button allows the user to select the sleep options by
adjusting the timer in 30 minute increments up to 120 minutes. Additionally,
this button pauses the CD, DVD or VCR when the component is activated
with the remote control.
MTS/Play – This button will select the MTS options of Stereo, SAP or Mono
in TV mode and alternate audio channels, where available, in DTV mode.
Additionally, this button plays the CD, DVD or VCR when the component is
activated with the remote control.
CC/Stop – This button will select the Closed Caption mode. The options
are OFF, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3 OR TEXT4.
Additionally, this button stops the CD, DVD or VCR when the component is
activated with the remote control.
TV/Previous Chapter – Repeated pressing of this button switches between
DTV and TV programming. Note: this button has been pre-programmed for
the VIZIO GV47LHDTV. This button also functions as a DVD Previous
Chapter when the DVD player is activated with the remote control.
AV/Reverse – Repeated pressing of this button with switch between AV1
and AV2 inputs. Additionally, this button rewinds the CD, DVD or VCR
when the component is activated with the remote control.
COMPONENT/Forward – Repeated pressing of this button with switch
between Component 1 and Component 2 inputs. Additionally, this button
forwards the CD, DVD or VCR when the component is activated with the
remote control.
HDMI/ Next Chapter – Repeated pressing of this button will switch between
HDMI 1 and HDMI 2 inputs. Additionally, this button functions as a DVD
Next Chapter when the component is activated with the remote control.
ZOOM (- and +) – Use these buttons to increase or decrease the size of the
picture. Note that in the zoom mode parts of the picture will not be visible
because they extend beyond the edges of the screen and Zoom mode is
not available for DTV and 1080i/1080P resolutions.
FREEZE – Press this button to “Freeze-Frame” the current screen. Press
this button again the continue playing. Note: This is not available for DTV or
1080i/1080P resolution.
RGB – This button selects an RGB Analog component such as a PC.
PIP – Use this button to activate the Picture-In-Picture mode.
PIP CH (- and +) – These buttons are used to select the channels within the PIP screen when DTV/TV is
the PIP input selected.
AUDIO – Press this button to switch the audio from the main screen to the sub-screen while in PIP or
POP mode.
PIP INPUT – Press the button to choose the PIP input. Note: The TV must be in PIP/POP mode for this
button to be functional. For additional information regarding the PIP/POP options, see section 4.15.3 Picture
PIP S
-In-Picture (PIP)/Picture-by-Picture (POP) Mode, page 55.
IZE – Press this button to select the size of the PIP screen from one of the following: small, medium
or large.
MODE – Use this button to change the picture mode from Custom, Standard, Movie and Game.
SWAP – Used to swap the inputs from the main screen and the sub-screen while in PIP/POP mode.
Version 8/3/2007 14
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
1.4.1 Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
1.4.2 Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
1.4.3 VIZIO Universal Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 8/3/2007 15
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO GV47LHDTV has six different ways to connect your video equipment from a basic connection
to the most advanced for digital displays.
Rear
Connection
Quality (type)
Connector
Panel
Color
Codes
Description
Best
(digital)
Best
(digital)
- - - - - - - - - - - Good
(analog)
Best
(analog)
Better
(analog)
White
Black
Blue
Green
and
Purple
HDMI (High-Definition Multimedia Interface) - It is
the first and only industry-supported, uncompressed,
all-digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2 encoded
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
RGB PC (VGA) – This video input has separate red,
green and blue color components. The signal
carries horizontal and vertical sync information on
the green signal. This is most commonly used for
PC input.
Component 1/2 - The video signal is separated into
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
S-Video (AV2) - The video signal is separated into
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
‘cross color’ effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
AV1/2 (Composite) - The complete video signal is
carried through this single pin connector. This is the
most commonly used video connection.
Good
(analog)
Good
(analog)
Orange
Yellow
and
Orange
Note: For more info refer to the Quick Start Guide
Version 8/3/2007 16
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
2.2 Connecting Your Cable or Satellite Box
2.2.1 Using HDMI
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the LCD HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters or less. See
0Hwww.vizioce.com
Connecting your Cable or Satellite Box (Best)
or call 1-888-VIZIOCE (1-888-849-4623) for details.
1. Turn off the power to the LCD HDTV and HDTV Set-Top Box.
2. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI Input (white color area) at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV and HDTV Set-Top Box.
4. Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
c) The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection
d) If you are already using the HDMI 1 input for another component, or you do not want to use
e) Refer to your HDTV Set-Top Box user manual for more information about the video output
Version 8/3/2007 17
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
the HDMI 1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI 2
connection.
requirements of the product or consult your cable or satellite operator.
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
For Cable or Satellite Boxes with DVI:
1. Turn off the power to the LCD HDTV and HDTV Set-Top Box.
2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI Input (white color area) at the rear of the LCD HDTV.
3. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white area) at the rear of the
LCD HDTV.
4. Turn on the power to the LCD HDTV and HDTV Set-Top Box.
5. Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB
PC input for a greater selection of PC formats.
Note:
a) The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
b) Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 8/3/2007 18
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
2.2.2 Using Component Video
Connecting your Cable or Satellite Box (Better)
1. Turn off the power to the LCD HDTV and HDTV Set-Top Box.
2. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
3. Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb
(blue color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
4. Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the LCD HDTV.
5. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component 1 input (green color
area) at the rear of the LCD HDTV.
6. Turn on the power to the LCD HDTV and HDTV Set-Top Box.
7. Select Component 1 using the INPUT button on the remote or side of the LCD HDTV, or
directly by pressing the Component button on the Remote Control.
Note:
a) If you are already using the Component 1 input for another component, or you do not want
b) Refer to your HDTV Set-Top Box user manual for more information about the video output
to use the Component 1 input for the Set-Top Box, you can connect the Set-Top Box to the
Component 2 connections coded by the purple area.
requirements of the product or consult your cable or satellite operator.
Version 8/3/2007 19
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
2.3 Connecting Coaxial (RF)
2.3.1 Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your
antenna or digital cable to the DTV/TV
CABLE/ANTENNA connector at the rear of the LCD
HDTV.
3. Turn on the power to the LCD HDTV.
4. Select DTV using the INPUT button on the remote
or side of the LCD HDTV, or directly by pressing
the TV button on the Remote Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or
b) Digital broadcasts are not available in all areas. Refer to 2Hwww.antennaweb.org
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact VIZIO at 3Hwww.VIZIOCE.com
consult your cable, satellite or TV station operator.
detailed information.
or call 1-888-
VIZIOCE (1-888-849-4623).
for
Version 8/3/2007 20
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
2.3.2 Using Your Antenna or Cable for TV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your
antenna or cable to the DTV/TV CABLE/ANTENNA
connector at the rear of the LCD HDTV
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing the
TV button on the Remote Control.
2.3.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the LCD HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna
Out” connector on the rear of your VCR to the
DTV/TV CABLE/ANTENNA connector at the rear of
the LCD HDTV.
3. Turn on the power to the LCD HDTV and VCR.
4. Select TV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing the
TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
Version 8/3/2007 21
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
2.4 Connecting Your DVD Player
You have several options for connecting your DVD player to your GV47LHDTV – HDMI, Component, SVideo and Composite (AV) inputs. Based on your home theater configuration, you can decide which
option is the right one for you.
2.4.1 Using HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be
connected to the HDMI input of the VIZIO GV47LHDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters or less.
See 1Hwww.VIZIOCE.com
Connecting your DVD Player (Best):
or call 1-888-VIZIOCE (1-888-849-4623) for details.
1. Turn off the power to the LCD HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI
Input (white color area) at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV and your DVD player.
4. Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
a) If you are already using the HDMI 1 input for another component, or you do not want to use
b) Refer to your DVD player user manual for more information about the video output
Version 8/3/2007 22
the HDMI 1 input for the DVD player, you can connect the DVD player to the HDMI 2
connection.
requirements of the product.
www.VIZIOCE.com
VIZIO GV47L FHD TV User Manual
For DVD Players with DVI:
1. Turn off the power to the LCD HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI Input (white color area) at the rear of the LCD HDTV.
3. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your DVD player and connect the other end to
the audio connectors associated with the HDMI input (white area) at the rear of the LCD
HDTV.
4. Turn on the power to the LCD HDTV and your DVD player.
5. Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: Refer to your DVD player user manual for more information about the video output requirements of
the product.
Version 8/3/2007 23
www.VIZIOCE.com
Loading...