USER MANUAL
Model E55-E1, E55-E2, E60-E3, E65-E0, E65-E1, E65-E3, E70-E3, E75-E1, E75-E3, & E80-E3
Safety & Certification
THANK YOU FOR CHOOSING VIZIO
And congratulations on your new VIZIO Display.
To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at (877) 698-4946.
We recommend that you register your VIZIO product at www.VIZIO.com
Extended Warranties
For peace of mind, and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans provide additional coverage during the standard warranty period.
To purchase an extended warranty service plan, visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.
When you see this symbol, please read the accompanying helpful tip.
IMPORTANT SAFETY INSTRUCTIONS
Your Display is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your Display from being damaged, the following instructions should be observed for the installation, use, and maintenance of your Display. Read the following safety instructions before operating your Display. Keep these instructions in a safe place for future reference.
•To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your
Display.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•Unplug the power cord before cleaning your Display.
•When moving your Display from an area of low temperature to an area of high temperature, condensation may form in the housing.
Wait before turning on your Display to avoid causing fire, electric shock, or component damage.
•A distance of at least three feet should be maintained between your Display and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your Display close to smoke. Operating your Display close to smoke or moisture may cause fire or electric shock.
•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Display and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your Display in a bookcase or cabinet unless proper ventilation is provided.
•Never push any object into the slots and openings on your Display cabinet. Do not place any objects on the top of your
Display. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Display.
•Your Display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
ii
•Do not apply pressure or throw objects at your Display. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
•The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
•When connected to a power outlet, power is always flowing into your Display. To totally disconnect power, unplug the power cord.
•The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your Display that may be of sufficient magnitude to constitute a risk of electric shock to persons.
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket should be installed near your Display and easily accessible.
•Only power of the marked voltage can be used for your Display.
Any other voltage than the specified voltage may cause fire or electric shock.
•Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
•Unplug your Display during a lightning storm or when it will not be used for long period of time. This will protect your Display from damage due to power surges.
•Do not attempt to repair or service your Display yourself.
Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
•WARNING: Keep your Display away from moisture. Do not expose your Display to rain or moisture. If water penetrates into your Display, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•Do not use your Display if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Display yourself.
•Avoid using dropped or damaged appliances. If your Display is dropped and the housing is damaged, the internal components
may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Display may cause fire or electric shock.
•Do not install your Display in an area with heavy dust or high humidity. Operating your Display in environments with heavy dust or high humidity may cause fire or electric shock.
•Follow instructions for moving your Display. Ensure that the power cord and any other cables are unplugged before moving your Display.
•When unplugging your Display, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Display will not be used for an extended period of time, unplug the power cord.
•To reduce risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
•If any of the following occurs, contact the dealer:
-The power cord fails or frays.
-Liquid sprays or any object drops into your Display.
-Your Display is exposed to rain or other moisture.
-Your Display is dropped or damaged in any way.
-The performance of your Display changes substantially.
•This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
•The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
•The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
•WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). with continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.
•Install the Display where it cannot be pulled, pushed or knocked over.
•Do not allow children to hang onto the product.
•Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children.
•The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
•WARNING: Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
•Many injuries, particularly to children, can be avoided by taking simple precautions such as:
•Using cabinets or stands recommended by the manufacturer of the television set.
•Only using furniture that can safely support the television set
•Ensuring the television set is not overhanging the edge of the supporting furniture.
•Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
•Not placing the television set on cloth or other materials that may be located between the television set and the supporting furniture.
•Educating children about the dangers of climbing on furniture to reach the television set or its controls.
•If your existing television set is being retained and relocated , the same considerations as above should be applied.
iii
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. |
For DTS patents, see http://patents.dts.com. |
|
Dolby, Dolby Audio, and the double-D symbol are |
Manufactured under license from DTS Licensing Limited. |
|
trademarks of Dolby Laboratories. |
||
DTS, the Symbol, & DTS and the Symbol together are |
||
|
||
|
registeredtrademarks,andDTSTruVolumeisatrademark |
|
|
of DTS, Inc. © DTS, Inc. All Rights Reserved. |
iv
Table Of Contents
Getting to Know Your Display...................................... |
6 |
Front Panel....................................................................................... |
6 |
Rear Panel......................................................................................... |
7 |
Replacing the Batteries.................................................................... |
9 |
Completing First-Time Setup....................................... |
10 |
Navigating the On-Screen Menu........................................................ |
11 |
Changing the Input Source................................................................. |
11 |
Changing the Screen Aspect Ratio..................................................... |
12 |
Adjusting the Picture Settings............................................................ |
13 |
Adjusting More Picture Settings...................................................... |
14 |
Adjusting the Color Temperature................................................... |
14 |
Adjusting the Picture Mode Edit Settings....................................... |
15 |
Saving a Custom Picture Mode....................................................... |
15 |
Locking/ Unlocking a Custom Picture Mode.................................. |
15 |
Deleting a Custom Picture Mode.................................................... |
16 |
Resetting a Picture Mode................................................................. |
16 |
Adjusting the Color Tuner Settings................................................. |
17 |
Adjusting the Audio Settings.............................................................. |
20 |
Changing the Equalizer Settings..................................................... |
20 |
Adjusting the network Settings.......................................................... |
21 |
Setting Timers...................................................................................... |
23 |
Setting the Sleep Timer.................................................................... |
23 |
Setting the Auto Power Off Feature................................................ |
23 |
Renaming Devices on the Input Menu............................................... |
24 |
Changing the SYSTEM Settings........................................................... |
25 |
Checking for System Updates......................................................... |
25 |
Viewing System Information........................................................... |
25 |
Setting the Time and Local Settings................................................ |
25 |
Changing the On-Screen Menu Language...................................... |
26 |
Adjusting the CEC Settings.............................................................. |
26 |
Adjusting the Power Mode.............................................................. |
26 |
Turning the Power Indicator On or Off........................................... |
27 |
Changing the Display Name............................................................ |
27 |
Managing Mobile Devices................................................................ |
27 |
Using the Reset & Admin Menu......................................................... |
28 |
Restoring the Display to Factory Default Settings......................... |
28 |
Using the Info Window........................................................................ |
29 |
Troubleshooting & Technical Support........................ |
30 |
Specifications................................................................ |
34 |
Regulatory Information................................................ |
43 |
Legal Information......................................................... |
44 |
Limited Warranty.......................................................... |
45 |
Limited Warranty Mexico............................................. |
47 |
v
Getting to Know Your Display |
1 |
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the Display turns on, then goes out after several seconds.
To keep the power indicator on as long as the Display is on, see Turning the Power Indicator On or Off.
FRONT PANEL
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
1
Ethernet - Connect an Ethernet cable to modem/ router.
Optical Audio Out - Connect an optical/SPDIF audio device, such as a home audio receiver
RCA Audio Out- Connect an RCA audio device, such as sound bar.
USB - Connect a USB thumb drive to play videos.
HDMI - Connect an HDMI device.
USB - Connect a USB thumb drive to play videos.
Components - Connect a component or composite devices.
HDMI - Connect an HDMI device.
Power - Press to turn on the Display. Press and hold to turn the Display off.
Volume - Press to increase or decrease the Display volume level.
Input - Press to access the input menu.
REAR PANEL
7
1
WALL-MOUNTING THE DISPLAY
To mount your Display on a wall, you will need a wall mount. Consult the information on this page to find the appropriate mount for your Display.
Be sure the mount you choose is capable of supporting the weight of the Display. After you have determined that you have the correct mount for your Display, you can begin the installation.
To install your Display on a wall:
1.Disconnect any cables connected to your Display.
2.PlacetheDisplayface-downonaclean,flat,stablesurface.Besurethe surface is clear of debris that can scratch or damage the Display.
3.Remove the stands by loosening and removing the screws.
4.Attach your Display and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this Display.
Installing a Display on a wall requires lifting.
To prevent injury or damage to the Display, ask someone to help you.
|
E55-E1 |
E55-E2 |
E60-E3 |
E65-E0 |
E65-E1 |
E65-E3 |
E70-E3 |
E75-E1 |
E75-E3 |
E80-E3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw Size: |
M6 |
M6 |
M6 |
M6 |
M6 |
M6 |
M6 |
M8 |
M6 |
M6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Hole Pattern: |
200 mm (V) |
200 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
400 mm (V) |
|
x 200 mm (H) |
x 200 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
x 400 mm (H) |
||
|
|||||||||||
Weight w/o Stand: |
26.68 lb |
34.39 lb |
43.65 lb |
50.72 lb |
50.72 lb |
48.94 lbs |
56.88 lb |
77.16 lb |
62.83 lb |
85.98 lb |
|
(12.10 kg) |
(15.60 kg) |
(19.8 kg) |
(23.0 kg) |
(23 kg) |
(22.8 kg) |
(25.8 kg) |
(35.0 kg) |
(28.5 kg) |
(39.0 kg) |
||
|
8
USING THE REMOTE
2 |
1 |
3 |
4 |
|
5 |
|
6 |
7 |
|
8 |
|
10 |
13 |
|
|
|
9 |
11 |
|
|
12 |
|
14 |
|
15 |
16 |
|
|
1.Power - Turn TV on or Off.
2.Input - Change the currently displayed input.
3.Exit - Close the on-screen menu.
4.Menu - Display the on-screen menu.
5.Arrows - Navigate the on-screen menu.
6.OK / Enter - Select the highlighted option / Confirm channel or passcode entered using the number pad.
7.Back - Go to the previous on-screen menu.
8.Info - Display the info window.
9.Volume Up/Down - Increase or decrease the loudness of the audio.
10.Closed Captions - open the closed caption menu.
11.PIC - Opens the picture mode menu.
12.Wide - Change the display mode.
13.Channel Up/Down - Not supported on this model.
14.Mute - Turn the audio on or off.
15.Last - Not supported on this model.
16.Number Pad - Not supported on this model.
17.Link - Launches pair with the VIZIO SmartCast App.
18.Dash - Not supported on this model.
17 |
18 |
1
Replacing the Batteries
1.Find the notch on the back of the remote. Insert a coin and pry open the back cover.
2.Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.
3.Replace the battery cover.
In many places batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information please visit www.vizio.com/environment.
WARNING: keep the remote control batteries away from children. It may cause choking and/or lead to a fire or chemical burn if mishandled. Do not dispose of batteries in fire. Replace only with batteries of the correct type.
When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries.
REMOTE CONTROL
9
Completing First-Time Setup |
2 |
The first time you turn on the Display, you can chose how to setup your VIZIO SmartCast™ Display.
Complete Setup with the VIZIO SmartCast™ App (recommended):
Download the free |
VIZIO |
SmartCast™ |
App |
on |
your smartphone |
|
or tablet |
to set up your VIZIO display. Use |
your phone to power |
||||
on your |
display, |
adjust |
the volume, |
switch |
inputs, play and |
control streaming content from your iOS or Android device.
Go to http://www.vizio.com/smartcastapp to get started.
-OR- Complete Setup with the IR Remote:
Use the included IR remote to manually set up your display. The VIZIO SmartCast™ App is still VIZIO’s recommended setup method. Please note that a mobile device (not included) is still required to cast content from apps like Netflix and YouTube.
Before you begin the first-time setup:
•Your Display should be installed and the power cord should be connected to an electrical outlet.
•Your devices should be connected.
•If you have a wireless network, have the network password ready.
•If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Display.
Setup with the VIZIO SmartCast™ App
1.Download the free VIZIO SmartCast™ App on to your mobile device and launch the app.
2.Pair your mobile device to your display.
3.Follow the instructions your mobile device and display screen to complete setup.
iOS Device Paring:
a.Select Get Started.
b.Hold your mobile device next to the VIZIO logo on your Display.
Android Device Pairing:
Note the Wi-Fi setup name on the top corner of your Display.
a.Select Get Started and Select your preferred language.
b.Select your Display name from the list shown on your device.
Need help installing the display?
Refer to the printed Quick Start Guide for detailed instructions on how to install your new E-Series display. You can also find a digital copy on support.vizio.com
Setup with the IR Remote
1.Press the OK/Play key on your IR remote during the initial setup screen.
2.Use the Arrow Keys and the OK/
Play button to select and confirm settings.
3.Follow the instruction on the screen to complete setup.
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model. |
10 |
Using the On-Screen Menu |
3 |
Your Display features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the remote.
From this menu, you can:
•Adjust the Picture settings
•Adjust the Audio settings
•Adjust the Network settings
•Setting the Sleep Timers
•Name and adjust Inputs
•Adjust System settings
•Access the user manual
Display Settings
Picture
Audio
Network
Timers
Inputs
CC Closed Captions
System
User Manual
NAVIGATING THE ON-SCREEN MENU
To open the on-screen menu, press the MENU button on the remote.
Use the Arrow buttons to highlight a menu option, and press the OK button to select that option.
While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen. The EXIT button will close the on-screen menu.
CHANGING THE INPUT SOURCE
External devices such as DVD players, Blu-ray Players, and video game consoles can be connected to your Display. To use one of these devices with your Display, you must first change the input source using the Input menu.
To change the input source:
1. Press the INPUT button on the remote. The Input menu is displayed.
2. Use the Left/Right Arrow buttons or the INPUT button on the remote to highlight the input you wish to view and press OK.
The selected input is displayed.
Input Name
Change Input
CAST |
HDMI-1 |
HDMI-2 |
HDMI-3 |
COMP |
|
|
|
|
|
You can change the input names that appear on the Input menu to make your devices easy to recognize. See Renaming Devices on the Input Menu for more information.
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
11
CHANGING THE SCREEN ASPECT RATIO
The Display can display images in five different modes: Normal,
Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently.
Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include wide-screen movies and older television programs.
To change the screen aspect ratio:
1.Press the WIDE button on the remote.
2.Use the Arrow buttons to highlight the aspect ratio you wish to view and press OK.
•Normal preserves the content’s original aspect ratio and size.
•Standard Definition (480i and 480p—old Display programs) - Since the 4:3 aspect ratio is not large enough to fill the Display’s screen, black bars are added to the left and right of the display image.
•720p HD - Fills a 720p screen.
•1080p and 1080i HD - Fills a 1080p or 1080i screen.
•Stretch expands a widescreen image to fill the screen from top to bottom and stretches it half as much from right to left. Figures appear tall and thin.
•Standard Definition - Not available.
•720p and HD - If you are watching widescreen 1.85:1 content, the image will fill the screen. With 2.35:1 widescreen content, one-sixth of the image is cut off by the left and right sides of the screen.
•1080p and 1080i - Not available.
•Panoramic stretches a 4:3 aspect ratio picture to the left and right edges of the screen. The center of the image is not
stretched, but the sides of the image are extremely stretched. If you are watching widescreen (1.85:1 or 2.35:1) content with black bars on the top and bottom, the black bars will still appear on the top and bottom of the display image.
•Standard Definition (480i and 480p) - Fills the screen from the left to right edges.
•720p - Not available.
•1080p and 1080i - Not available.
•Wide stretches a 4:3 aspect ratio picture to the edges of the screen. Since the picture is being stretched, the display image may appear distorted—figures appear short and fat. If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image.
•Zoom expands images evenly in all directions (33% taller and
33% wider) with black bars to fit the screen. A 720p image will fill a 1080p screen.
•Standard Definition - Not available.
•720p HD - Fills a 720p screen
•1080p and 1080i - Not available.
Tip: The aspect ratio cannot be changed for Ultra HD content or HDR content.
3
Normal |
Panoramic |
Wide |
Zoom |
Stretch |
|
|
|
|
|
Note: Aspect ratio settings may vary by Input source.
12
ADJUSTING THE PICTURE SETTINGS
Your Display display can be adjusted to suit your preferences and viewing conditions.
If you’ve changes to the settings for a picture mode, an asterisks appears after its name (see Saving a Custom Picture Mode).
To adjust the picture settings:
1.Press the MENU button on the remote. The on-screen menu is displayed.
2.Use the Arrow buttons on the remote to highlight Picture and press OK. The PICTURE menu is displayed.
3.Use the Arrow buttons on the remote to highlight Picture Mode, then use the Left/Right Arrow buttons to change the picture mode:
•Standard mode sets the picture settings to the default settings.
•Calibrated mode sets the picture settings to values ideal for watching Display in a brightly-lit room.
•Calibrated Dark mode sets the picture settings to values ideal for watching Display in a dark room.
•Vivid mode sets the picture settings to values that produce a brighter, more vivid picture.
Picture |
|
|
|
|
Back |
|||
|
|
|
|
|||||
|
|
|
|
|
||||
Picture Mode |
Calibrated |
|||||||
Auto Brightness Control |
|
|
|
|
Off |
|||
Backlight |
|
|
|
|
|
90 |
||
|
|
|
|
|
||||
Brightness |
|
|
|
|
50 |
|||
|
|
|
|
|||||
Contrast |
|
|
|
50 |
||||
|
|
|
|
|||||
Color |
|
|
|
50 |
||||
|
|
|
|
|||||
Tint |
|
|
|
0 |
||||
|
|
|
|
|||||
Sharpness |
|
|
|
20 |
||||
|
|
|
||||||
More Picture |
|
|
|
|
|
|||
Picture Mode Edit |
|
|
|
|
|
|||
Color Calibration |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
•Game mode reduces throughput delays and optimizes the picture settings for displaying game console output.
•Computer mode optimizes the picture settings for displaying computer output.
3
4.To manually change each of the picture settings, use the Up/ Down Arrow buttons on the remote to highlight that picture setting, then use the Left/Right Arrow buttons to adjust the setting:
•Auto Brightness Control - The auto brightness control detects the light levels in the room and automatically adjusts the backlight for the best picture. Select Off, Low, Medium, or
High.
•Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. Backlight cannot be adjusted when starting from some picture modes.
•Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.
•Contrast - Adjusts the white level of the picture. When this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.
•Color - Adjusts the intensity of the picture colors.
•Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.
•Sharpness - Adjusts the edge sharpness of picture elements.
It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist.
5.When you have finished adjusting the picture settings, press the EXIT button on the remote.
13
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the |
More Picture |
|
|
Back |
|
|
|
||||
Arrow buttons to highlight More |
|
|
|
||
Color Temperature |
Normal |
||||
Picture, and then press OK. |
|||||
Black Detail |
|
|
Off |
||
|
|
|
|||
2. Use the Arrow buttons to |
Active LED Zones |
|
|
On |
|
Motion Control |
|
|
|
||
highlight the setting you wish to |
|
|
|
||
Clear Action |
|
|
Off |
||
adjust, then press the Left/Right |
|
|
|||
Reduce Noise |
|
|
|
||
Arrow buttons to change |
|
|
|
||
Game Low Latency |
|
|
Off |
||
the setting: |
|
|
|||
Pure Cinema |
|
Auto |
|||
|
|
||||
• Color Temperature - |
Color Space |
|
Auto |
||
See Adjusting the Color |
Gamma |
2.1 |
|||
Temperature. |
|
|
|
|
•Black Detail - Adjusts the average brightness of the picture to compensate for large areas of brightness.
Select Off, Low, Medium, or
High.
•Active LED Zones - Dynamically improves the contrast ratio of the picture by adjusting the backlight. The adjustment is controlled by the content on the screen. Select On or Off.
•Motion Control - Adjusts motion related features (not on all models)
•Reduce Judder - Activates Smooth Motion motion estimation/motion compensation, which suppresses motion judder, or “stuttering” of the image when the camera moves across a scene horizontally. As the setting increases, judder is reduced.
‡Only available on HDMI inputs.
•Reduce Motion Blur - Increases frame rate to reduce motion blur of 60 hertz video. As the setting increases, motion blur is reduced.
•Clear Action - Reduces blue in scenes with fast action.
Some sensitive viewers may notice flickering. Select On or
Off.
•Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
•Reduce Block Noise - Reduces pixelation and distortion for mpeg files. Select Off, Low, Medium, or High.
•Game Low Latency - Select On to reduce video delay (lag) when gaming.
•Pure Cinema Mode - Optimizes the picture for watching film. Select Auto or Off.
•Color Space‡ - Select Color Space for the source. Video sources uses YCbCr, but PC uses RGB.
•Gamma - Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it’s dark.
3.When you have finished adjusting More Picture Settings, press the
EXIT button on the remote.
3
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the picture.
To adjust the color temperature:
1.From the MORE PICTURE menu, use the Arrow buttons to highlight Color Temperature, and then press OK.
2.Use the Arrow buttons on the remote to highlight a color temperature preset and then press OK.
•Normal is optimized for television viewing.
•Cool produces a blue-hued picture.
Back
Color Temperature
Normal
Cool
Computer
•Computer optimizes the picture for use as a PC monitor.
•When you have finished adjusting the color temperature, press the EXIT button on the remote.
14
Adjusting the Picture Mode Edit Settings
Picture Mode Edit Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings.
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use the |
|
|
|
|
|
Back |
|
Arrow buttons to highlight Picture |
|
|
|
|
|
||
Picture Mode Edit |
|||
Mode Edit, and then press OK. |
Save Picture Mode |
||
The PICTURE MODE EDIT menu is |
Lock Picture Mode |
||
displayed. |
Delete Picture Mode - MyMode |
2.Use the Arrow buttons to highlight the setting you wish to adjust, then press OK to change the setting:
•Save Picture Mode - Save a
custom picture mode. |
Picture Mode Edit |
|
|
Back |
|
|
|||
• Lock Picture Mode - Prevent |
|
|
|
|
Save Picture Mode |
|
|
|
|
changes to custom picture |
|
|
|
|
Lock Picture Mode |
|
|
On |
|
modes. Choose between On or |
Reset Picture Mode - |
MyMode |
||
Off |
|
|
|
|
•Delete Picture Mode† - Delete a saved picture mode settings.
*Not available on HDMI input 5.
† |
Only available on customized preset modes. |
‡ |
Only available on HDMI input. |
Saving a Custom Picture Mode
Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
•Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.
•The custom picture mode is not automatically saved.
To save a custom picture mode:
1.From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Save Picture Mode, and then press OK. The SAVE PICTURE MODE menu is displayed.
2.Use either on-screen keyboard to enter a name for your custom picture mode.
3.Highlight Save and press OK.
4.Press the EXIT button to exit the menu screens.
Back
Save Picture Mode
a |
b |
c |
d |
e |
f |
g |
h |
i |
j |
k |
l |
m |
n |
o |
p |
q |
r |
s |
t |
u |
v |
w |
x |
y |
z |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
.@# |
|
|
äêí |
|
Space |
|
|
Save
3
Locking/Unlocking a Custom Picture Mode
Custom picture modes can be locked/unlocked with a systemn PIN to prevent accidental changes to their settings.
To lock all custom picture modes:
1.From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The LOCK PICTURE MODE menu is displayed.
2.Use the Arrow buttons to select
On.
3.Use the Number Pad on your remote to enter a unique 4-digit PIN.
—or—
If a system pin code was previously created, use the Number Pad on your remote to enter your pin code.
To unlock all custom picture modes:
Back
System Pin Code
Change the pin used for the System Pin.
New Pin
Confirm Pin
Cancel
1.From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The UNLOCK PICTURE MODE menu is displayed.
2.Use the Arrow buttons to select Off.
3.Use the Number Pad on your remote to enter your 4-digit PIN.
4.Make any desired changes to the picture modes.
5.Relock the picture modes, if desired.
6.Press the EXIT button to exit the menu screens.
15
3
Deleting a Custom Picture Mode
Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode.
To delete a custom picture mode:
1.From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Delete Picture Mode, and then press OK. The DELETE PICTURE MODE window is displayed.
To delete the user created Custom 1 picture mode, select the Delete button.
Delete |
|
Cancel |
2.Use the Left/Right Arrow buttons to highlight Delete and press
OK.
3.Press the EXIT button to exit the menu screens.
Resetting a Picture Mode
A preset picture mode that has been edited can be restored to the factory default settings.
To reset a customized preset picture mode:
1.From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Reset Picture Mode, and then press OK. The RESET PICTURE MODE window is displayed.
Select Reset to restore Standard picture mode to factory defaults.
Reset |
|
Cancel |
2.Use the Left/Right Arrow buttons to highlight Reset and press
OK.
3.Press the EXIT button to exit the menu screens.
16