Vizio E55-F1, E70-F3, E80-F3, E75-F1, E65-F1 User Manual

...

FPO

USER MANUAL

Models: E43-F1, E50-F2, E55-F1, E65-F0, E65-F1, E70-F3, E75-F1, E75-F2, and E80-F3

Safety & Certication



THANK YOU FOR CHOOSING VIZIO

And congratulations on your new VIZIO TV.

To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.

PRODUCT REGISTRATION

To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at (877) 698-4946.

We recommend that you register your VIZIO product at www.VIZIO. com.

Extended Warranties

For peace of mind, and to protect your investment beyond the standard

warranty, VIZIO oers on-site extended warranty service plans. These

plans provide additional coverage during the standard warranty period.

To purchase an extended warranty service plan, visit www.VIZIO.com.

WHEN READING THIS MANUAL

When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.

When you see this symbol, please read the accompanying helpful tip.

IMPORTANT SAFETY INSTRUCTIONS

Your TV is designed and manufactured to operate within dened design limits. Misuse may result in electric shock or re. To prevent

your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.

• To reduce the risk of electric shock or component damage,

switch o the power before connecting other components to

your TV.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does

not t into your outlet, consult an electrician for replacement

of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• Unplug the power cord before cleaning your TV.

• When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the

housing. Wait before turning on your TV to avoid causing re,

electric shock, or component damage.

• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven,

amplier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause re or electric

shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing

so could short circuit parts causing a re or electric shock.

Never spill liquids on your TV.

• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer’s warranty does not cover user abuse or improper installations.

• The power cord must be replaced when using dierent voltage

than the voltage specied. For more information, contact your

dealer.

• When connected to a power outlet, power is always owing into your TV. To totally disconnect power, unplug the power

cord.

• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the

inside of your TV that may be of sucient magnitude

to constitute a risk of electric shock to persons.

• Do not overload power strips and extension cords.

Overloading can result in re or electric shock.

• The wall socket should be installed near your TV and easily accessible.

• Only power of the marked voltage can be used for your TV.

Any other voltage than the specied voltage may cause re or

electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.

• Do not attempt to repair or service your TV yourself. Opening

or removing the back cover may expose you to high voltages,

electric shock, and other hazards. If repair is required,

contact your dealer and refer all servicing to qualied service

personnel.

• WARNING: Keep your TV away from moisture. Do not expose

your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use

in this case may result in re or electric shock.

• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.

• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use

of your TV may cause re or electric shock.

• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust

or high humidity may cause re or electric shock.

• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.

• To prevent injury, this apparatus must be securely attached to

the oor/wall in accordance with the installation instructions.

• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires

inside the cord and cause re or electric shock. When your TV will not be used for an extended period of time, unplug the

power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage

the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, re or the like.

• If any of the following occurs, contact the dealer:

- The power cord fails or frays.

- Liquid sprays or any object drops into your TV.

- Your TV is exposed to rain or other moisture.

- Your TV is dropped or damaged in any way.

- The performance of your TV changes substantially.

• This apparatus shall not be exposed to dripping or splashing

and no objects lled with liquids, such as vases, shall be

placed on the apparatus.

• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• CAUTION: These servicing instructions are for use by qualied

service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the

operating instructions unless you are qualied to do so.

• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the

presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sucient magnitude to

constitute a risk of electrical shock to persons.

• WARNING: Exposure to loud sounds can damage your hearing

causing hearing loss and tinnitus (ringing or buzzing in the

ears). With continued exposure to loud noises, ears may

become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.

• Install the TV where it cannot be pulled, pushed or knocked over.

• Do not allow children to hang onto the product.

• Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children.

• The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

• WARNING: Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.

• Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the supporting furniture.

• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

• Not placing the television set on cloth or other materials that may be located between the television set and the supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

• If your existing television set is being retained and relocated, the same considerations as above should be applied.

• WARNING: To prevent injury, this apparatus must be securely

attached to the oor/wall in accordance with the installation

instructions.

iii

TELEVISION ANTENNA CONNECTION PROTECTION

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides

information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Ground Clamp

Antenna Lead In Wire

Antenna Discharge Unit

(NEC Section 810-20)

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the

screen of the coaxial cable is intended to be connected to earth in

the building installation.

Electric Service Equipment

Grounding Conductors

(NEC Section 810-21)

Ground Clamps

Power Service Grounding Electrode System

(NEC ART 250, part H)

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. DTS, the symbol, DTS and the Symbol together, and DTS Studio Sound II are registered trademarks and/or trademarks of DTS, Inc. in th United States and/or other countries.

This product qualies for ENERGY STAR in the “factory

default” settings and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase

power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information

on the ENERGY STAR program, refer to energystar.gov.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are

trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Denition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

Table Of Contents

Getting to Know Your TV .............................................7

Front Panel .......................................................................................... 7

Rear Panel ...........................................................................................8

Wall-mounting the TV ......................................................................... 9

Using the remote ................................................................................ 10

Completing The First-Time Setup ...............................11

Using the On-Screen Menu .........................................12

Navigating the On-Screen Menu ........................................................ 12

Changing the Input Source ................................................................ 12

Changing the Screen Aspect Ratio .....................................................13

Adjusting the Picture Settings ............................................................ 14

Adjusting More Picture Settings ..................................................... 15

Adjusting the Color Temperature ................................................... 15

Adjusting the Picture Mode Edit Settings ......................................16

Saving a Custom Picture Mode .......................................................16

Locking/Unlocking a Custom Picture Mode ................................... 16

Deleting a Custom Picture Mode .................................................... 17

Resetting a Picture Mode ................................................................ 17

Adjusting the Color Tuner Settings ................................................18

Adjusting the Audio Settings .............................................................. 21

Adjusting the network Settings .......................................................... 22

Setting Timers ..................................................................................... 24

Setting the Timer ............................................................................. 24

Setting the Auto Power O Feature ...............................................24

Setting Up Channels ........................................................................... 25

Scanning for Channels ....................................................................25

Skipping Channels ...........................................................................25

Listening to Alternate Audio ..............................................................26

Changing the Analog Audio Language ...........................................26

Parental controls ................................................................................27

Using Parental Controls ..................................................................27

Enabling or Disabling Program Ratings .........................................27

Locking and Unlocking Channels .................................................... 27

Blocking and Unblocking Content by Rating .................................27

Setting Up Closed Captioning ............................................................ 28

Changing the Appearance of Digital Closed Captions ..................28

Renaming Devices on the Input Menu .............................................. 30

Changing the TV Settings ................................................................... 31

Viewing System Information ........................................................... 31

Changing the On-Screen Menu Language .....................................31

Setting the Time and Local Settings ...............................................32

Adjusting the CEC Settings .............................................................. 32

Turning the Power Indicator On or O .......................................... 32

Changing the Display Name............................................................33

Using the Reset & Admin Menu ......................................................... 34

Restoring the TV to Factory Default Settings ................................. 34

Using the Info Window .......................................................................36

SmartCast TV™ .............................................................37

What is SmartCast TV™? ................................................................... 37

What can you do with SmartCast TV™? ........................................... 37

How to Launch SmartCast TV™ ........................................................ 37

Playing USB Media .......................................................38

Displaying USB Media .........................................................................38

Preparing Your USB Drive to Play USB Media ...............................38

Removing the USB Drive from the TV ............................................38

Troubleshooting & Technical Support ........................42

Specications ...............................................................46

Regulatory Information ...............................................48

Limited Warranty .........................................................49

Legal Information.........................................................51

Getting to Know Your TV

FRONT PANEL

REMOTE SENSOR & POWER INDICATOR

When using the remote, aim it directly at this sensor.

The power indicator ashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see

Turning the Power Indicator On or O.

FRONT PANEL

USB - Connect a USB thumb drive to play photo, music, or video.

Component - Connect a component.

HDMI - Connect an HDMI device.

Coaxial - Connect to a coaxial cable from cable, satellite, or antenna.

REAR PANEL

HDMI - Connect an HDMI device.

Optical Audio Out - Connect to an optical/SPDIF audio device, such as home audio receiver.

Audio Out - Connect to an RCA device, such as sound bar.

Ethernet - Connect an Ethernet cable to modem/ router.

Power - Press to turn on the TV. Press and hold to turn the TV o.

Volume - Press to increase or decrease the TV volume level.

Input - Press to access the input menu.

Note: The image shown here is for illustrative purposes only and may be subject to change.

The actual number of ports and their locations may vary, depending on the model.

WALL-MOUNTING THE TV

To mount your TV on a wall, you will need a wall mount. Consult the

information on this page to nd the appropriate mount for your TV.

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1. Disconnect any cables connected to your TV.

2. Place the TV face-down on a clean, at, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3. Remove the stands by loosening and removing the screws.

4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV.

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

E43-F1 E50-F2 E55-F1 E65-F0 E65-F1 E70-F3 E75-F1 E75-F2 E80-F3

Screw Size: M6 M6 M6 M6 M6 M6 M8 M6 M6

Hole Depth: 29.6 mm 20 mm 14 mm 16 mm 18mm 12 mm 24 mm 20 mm 12 mm

Hole Pattern:

Weight w/o Stand:

200 mm x 200

9.24 kg

(20.4 lbs.)

200 mm x 200

11.11Kg

(24.5 lbs.)

200 mm x 200

16.30 Kg

(35.94 lbs.)

Note: This image is included for illustrative purposes only and may be subject to change.

The actual number of ports and their locations may vary according to the model.

400 mm x 200

19.70 Kg

(43.43 lbs..)

400 mm x 200

25.15 kg

(55.45 lbs.)

400 mm x 400

25.20 kg

(55.55 lbs.)

400 mm x 400

33.00 kg

(72.75 lbs.)

400 mm x 400

28.99 kg

(63.90 lbs.)

600 mm x 400

35.30 kg

(77.82 lbs.)

USING THE REMOTE

Replacing the Batteries

1. Find the notch on the back of the remote. Insert a coin and pry open the back cover.

2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.

3. Replace the battery cover.

1. Input - Change the currently displayed input

2. Power - Turn Television on or o

3. App Launcher - Quickly launch the pictured app

4. Exit - Close the on-screen menu

5. Menu - Display the settings menu

6. Arrow - Navigate the on-screen menus

7. OK/Play/Pause - Select the highlighted menu option and play or pause content

8. Back - Go to the previous on-screen menu

9. Info - Display the info window

10. Volume Up/Down - Increase or decrease the loudness of the audio

11. Closed Caption - Open the closed caption menu

12. V Button - Launch SmartCast TV/Return to SmartCast TV Home Screen

13. Pic - Cycle through the dierent picture setting modes

14. Channel Up/Down- Change the channel

15. Mute - Turn the audio on or o

16. Last - Return to the channel last viewed

17. Number Pad - Manually enter a channel

18. Wide - Change the Television mode

19. Dash - Use with number pad to manually enter a digital sub-channel. (For exam-

ple, 18-4 or 18-5)

In many places, batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information, please visit: https://www.duracell.com/en-us/technology/battery-care-use-and-disposal.

WARNING: keep the remote control batteries away from children. It may cause

choking and/or lead to a re or chemical burn if mishandled. Do not dispose of batteries in re. Replace only with batteries of the correct type.

When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries.

REMOTE CONTROL

The rst time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:

Before you begin the rst-time setup:

• Your Television should be installed and the power cord should be connected to an electrical outlet.

• If you have a wireless network, have the network password ready.

• If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television.

2Completing The First-Time Setup

1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password.

5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set!

3Using the On-Screen Menu

Your TV features an easy-to-use on-screen menu.

To open the on-screen menu, press the Menu button on the remote.

From this menu, you can:

• Adjust the Picture settings

• Adjust the Audio settings

• Adjust the Network settings

• Set up the Timers

• Adjust the Channel settings

• Set up Closed Captioning

• Name and adjust Inputs

• Adjust TV settings

TV Settings

Picture

Audio

Network

Timers

Channels

Closed Captions

Input Settings

System

User Manual

• View user manual

NAVIGATING THE ON-SCREEN MENU

To open the on-screen menu, press the Menu button on the remote.

Use the Arrow buttons to highlight a menu option, and press the OK button to select that option.

CHANGING THE INPUT SOURCE

External devices such as DVD players, Blu-ray Players, and video game

consoles can be connected to your TV. To use one of these devices

with your TV, you must rst change the input source using the Input

menu.

To change the input sources:

1. Press the Input button on the remote. The Input menu is displayed.

2. Use the Right/Left Arrow buttons or the Input button on the remote to highlight the input you wish to view and press OK. The selected input is displayed.

Input Name

Change Input

While navigating the on-screen menu, you can press the Back button at any time to return to the previous menu screen. The Exit button will close the onscreen menu.

SMARTCAST(New)

You can change the input names that appear on the Input menu to make your devices easy to recognize.

See

information.

HDMI-1

HDMI-2 COMP TV

HDMI-3

HDMI-4

Renaming Devices on the Input Menu

for more

CHANGING THE SCREEN ASPECT RATIO

The TV can display images in four dierent modes: Normal,

Panoramic, Wide, and Zoom. Each mode displays the picture

dierently.

Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include

wide-screen movies and older television programs.

To change the screen aspect ratio:

1. Press the Wide button on the remote.

2. Use the Arrow buttons to highlight the aspect ratio you wish to view and press OK.

• Normal preserves the content’s

original aspect ratio and size.

• Panoramic stretches a 4:3 aspect ratio picture to the left

and right edges of the screen. The center of the image is

not stretched, but the sides of the image are extremely

stretched. If you are watching widescreen (1.85:1 or 2.35:1) content with black bars on the top and bottom, the black bars will still appear on the top and bottom of the display image.

Normal

Tip: The aspect ratio cannot be changed for Ultra HD content or HDR content.

Panoramic

Wide

Note: Aspect ratio settings may vary by Input source.

Zoom

• Wide stretches a 4:3 aspect ratio picture to the edges of

the screen. Since the picture is being stretched, the display image may appear distorted—gures appear short and fat.

If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image.

• Zoom expands images evenly in all directions (33% taller

and 33% wider) with black bars to t the screen. A 720p image will ll a 1080p screen.

ADJUSTING THE PICTURE SETTINGS

Your TV can be adjusted to suit your preferences and viewing conditions.

If you save changes to the settings for a picture mode, an asterisk appears after its name (see

Mode

To adjust the picture settings:

1. Press the Menu button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight Picture and press OK. The PICTURE menu is displayed.

If Standard picture mode meets Energy Star® requirements. For

the best picture switch to Calibrated mode. Note that Calibrated

mode does not meet Energy Star® requirements. Customizing

picture setting will change the energy consumption required to operate the TV.

Saving a Custom Picture

3. Use the Arrow buttons on the remote to highlight Picture

Mode, then use the Left/Right Arrow buttons to change the

picture mode:

• Standard mode sets the

picture settings to the default settings.

• Calibrated mode sets the

picture settings to values ideal for watching TV in a brightly-lit room.

• Calibrated Dark mode sets

the picture settings to values ideal for watching TV in a dark room.

• Vivid mode sets the picture

settings to values that produce a brighter, more

Picture

Picture Mode Calibrated

Auto Brightness Control Off

Backlight 90

Brightness 50

Contrast 50

Color 50

Tint 0

Sharpness 20

More Picture

Picture Mode Edit

Color Calibration

vivid picture.

• Game mode reduces

throughput delays and optimizes the picture settings for displaying game console output.

• Computer mode optimizes the picture settings for

displaying computer output.

Back

4. To manually change each of the picture settings, use the Up/ Down Arrow buttons on the remote to highlight that picture

setting, then use the Left/Right Arrow buttons to adjust the setting:

• Auto Brightness Control - The auto brightness control detects

the light levels in the room and automatically adjusts the

backlight for the best picture. Select O, Low, Medium, or High.

• Backlight - Adjusts the LED brightness to aect the overall

brilliance of the picture. Backlight cannot be adjusted when starting from some picture modes.

• Brightness - Adjusts the black level of the picture. When this

setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.

• Contrast - Adjusts the white level of the picture. When this

setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed

out. If the setting is too high or too low, detail may be dicult

to distinguish in dark or bright areas of the picture.

• Color - Adjusts the intensity of the picture colors.

• Tint - Adjusts the hue of the picture. This setting is useful in

adjusting the esh tones in the picture. If esh appears too

orange, reduce the level of color before adjusting tint.

• Sharpness - Adjusts the edge sharpness of picture elements.

It can be used to sharpen non-HD (high denition) content;

however, it will not produce detail that does not otherwise

exist.

5. When you have nished adjusting the picture settings, press the Exit button on the remote.

Adjusting More Picture Settings

To adjust more picture settings:

1. From the PICTURE menu, use the

More Picture

Arrow buttons to highlight More Picture, and then press OK.

2. Use the Arrow buttons to highlight the setting you wish to adjust, then press the Left/ Right Arrow buttons to change the setting:

• Color Temperature -

See

Adjusting the Color

Temperature.

Color Temperature Normal

Black Detail Off

Extreme Black Engine™ Low

Clear Action Off

Reduce Noise

Game Low Latency Off

Film Mode On

Color Space Auto

Gamma 2.2

• Black Detail - Adjusts the

average brightness of the picture to compensate for large areas of brightness.

Select O, Low, Medium, or High.

• Xtreme Black Engine™ - Based on the content, dynamically

adjusts and balances the brightness and the contrast ratio of the picture by locally adjusting backlight zones.

• Clear Action - Reduces blur in scenes with fast action but

limtis the range for the Backlight setting.

Back

• Game Low Latency - Select On to reduce video delay (lag) when gaming.

• Film Mode - Optimizes the picture for watching lm. Select Auto or O.

• Color Space - Select Color Space for the source. Video

sources uses YCbCr, but PC uses RGB.

• Gamma - Set the shape of the Gamma curve. Use lower

Gamma values for bright room conditions, and higher values when it’s dark.

3. When you have nished adjusting More Picture Settings, press the

Exit button on the remote.

Adjusting the Color Temperature

Adjusting the color temperature changes the white balance of the picture.

To adjust the color temperature:

Back

1. From the MORE PICTURE menu, use the Arrow buttons to highlight Color Temperature, and then press OK.

Color Temperature

Normal

Cool

Computer

2. Use the Arrow buttons on the remote to highlight a color temperature preset and then press OK.

• Normal is optimized for television viewing.

• Cool produces a blue-hued picture.

• Computer optimizes the picture for use as a PC monitor.

3. When you have nished adjusting the color temperature, press the Exit button on the remote.

• Reduce Noise

- Reduce Signal Noise - Diminishes artifacts in the

image caused by the digitizing of image motion content. Select O, Low, Medium, or High.

- Reduce Block Noise - Reduces pixelation and distortion for mpeg les. Select O, Low, Medium, or High.

Adjusting the Picture Mode Edit Settings

Picture Mode Edit Settings allow you to make precise adjustments

to the picture and to create picture modes to save groups of picture settings.

To adjust the Picture Mode Edit settings:

1. From the PICTURE menu, use the

Back

Arrow buttons to highlight Picture Mode Edit, and then press OK.

The PICTURE MODE EDIT menu is displayed.

2. Use the Arrow buttons to highlight the setting you wish to adjust, then press OK to change the setting:

• Save Picture Mode - Save a

custom picture mode.

• Lock Picture Mode - Prevent

changes to custom picture

Picture

Picture Mode Edit

Picture Mode Calibrated

Save Picture Mode

Auto Brightness Control Off

Lock Picture Mode

Backlight 90

Reset Picture Mode - Calibrated

Brightness 50

Contrast 50

Color 50

Tint 0

Sharpness 20

More Picture

Picture Mode Edit

Color Calibration

Back

modes. Choose between On or O.

• Reset Picture Mode -

Standard† - Reset the picture

mode settings to factory default values.

Picture Mode Edit

Save Picture Mode

Lock Picture Mode On

Reset Picture Mode - Standard*

Back

Saving a Custom Picture Mode

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.

• Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.

• The custom picture mode is not automatically saved.

To save a custom picture mode:

1. From the PICTURE MODE EDIT

Save Picture Mode

Back

menu, use the Arrow buttons to highlight Save Picture Mode, and then press OK. The SAVE PICTURE MODE menu is displayed.

2. Use either on-screen keyboard to enter a name for your custom

a b c d e f g h i j k l m n o p q r s t u v w x y z 0

1 2 3 4 5 6 7 8 9

.@# äêí Space

picture mode.

3. Highlight Save and press OK.

Save

4. Press the Exit button to exit the menu screens.

Locking/Unlocking a Custom Picture Mode

Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings.

To lock all custom picture modes:

1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The

System PIN code

Change the PIN used for the System PIN.

Back

LOCK PICTURE MODE menu is displayed.

New PIN

2. Use the Number Pad on your remote to enter a unique 4-digit PIN. If a system PIN is set, then

Conrm PIN

lock/unlock. If no system PIN is set, then you will be prompted to set a PIN.

3. Highlight Save and press OK.

Cancel

Enter the 4-digit PIN using the numbers keys on the remote.

Save

4. Press the Exit button to exit the menu screens.

To unlock all custom picture modes:

1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The LOCK PICTURE MODE menu is displayed.

†

Only available on customized preset modes.

2. Use the Arrow buttons to select O.

3. Use the Number Pad on your remote to enter your 4-digit PIN.

4. Make any desired changes to the picture modes.

5. Then turn ON Lock Picture Mode.

6. Press the Exit button to exit the menu screens.

+ 36 hidden pages