Viz-Art Automation ZIP Plasma Mount Installation Manual

1. Installation:

2A. Install A1 and A2 elements to your flat display using

proper screws form mounting set.

2B. Level the element B before, then install

it to a wall, using proper dowels.

2C. Mount flat display with elements A1 andA2 on

element B already installed on a wall

2D. Make installation in 1 and 2 steps as

described below. In that layout of wall
mount, it will block and secure your flat
display.

ZIP - Wall mount

Wall mount for flat displays

1/2

LIST OF ITEMS:

 Mount elements(3 pcs.)
 Mounting set (1 set.)
 Instruction manual
 Vertical frame elements (2 pcs.)

3. Adjustment:

ZIP Plasma mount is dedicated for slim, fixed
installation

4. Technical Specification:

Model name:

ZIP Plasma Mount

Adjustment:

fixed

Own weight:

1,7 kg

Capaticty:

50 kg

5. Mounting set:

screws

M5x16 – 4 pcs.;
M6x20 – 4 pcs.;
M8x20 – 4 pcs.;

washers

Ø 6x12 – 4 pcs.;
Ø 8x16 – 4 pcs.;

dewels

Ø 10x50 – 4 pcs.

screws

Ø 6x50 – 4 pcs.

Manufactured by: VIZ-ART Automation

tel.[phone] www.viz-art.eu

2/2