Viz-Art Automation V-LIFT, VMAX-LIFT 95 Instruction Manual

1. APPLICATION METHODS:

Installation of the V-LIFT / VMAX-LIFT together with TV inside of a piece of furniture.
Universal V-lifts is designed to a base cabinet. A sliding TV swings the top element
ff the furniture. While hiding plasma the lift causes swinging elements of the top.
This way of installation requires hinges in the top of the furniture.

A. Choose the lift installation place. Mark a place for holes and

skrew on using screws A.

Attention! The installation is to be run only when the power is off
and the lift is down to its maximum.

A V-lift is to be installed to a stable piece of furniture using
fours screws.
Level up the lift in order to improve safety.

Move the lift to max height position, then install TV unit with
needed mounting accesories.

B. Attach elements B to a plasma TV/LCD using screws

number 1 and 2.

Installation to a plasma TV

V-LIFT/ VMAX-LIFT 95

TV lifts

Range of spacing

brackets

1/6

LIST OF COMPONENTS::

 Lift
 Mounting brackets for TV
 Wall switch
 Instruction manual

C. Installation to LCD VESA

D. Attach repealing elements C to the lift.

E. Lift dimensions– in installation to plasms TV.

F. Lift dimensions – In installation to LCD VESA.

G. Installed lift (w plasma TV) slided out and hidden.

H. Installed lift (with LCD VESA) slided out and hidden.

2. INSTALLATION - OPTION 2:

TV is to be installed inside a piece of furniture using V-LIFT / VMAX-LIFT.
In such installation elements of the top are permanently attached above
a plasma TV/LCD. Sliding a TV out of furniture raises the top of the furniture.

A. Choose the lift installation place. Mark a place for holes and

skrew on using screws A.

B. Zamontuj elementy Ci D do telewizora

plazmowego/LCD, przy pomocy śrub 1 i 2.

2/6