Viz-Art Automation CP-LIFT Series, CP-LIFT M, CP-LIFT L, CP-LIFT Installation Manual

1. PREPARATIONS FOR MOUNTING:

a. The CP-lift can only be opened in the "Locking Plate" position!
b. Opening the CP-lift in a different position than "Locking Plate" down, may cause serious damage to the device !!!
c. Unscrew the lid of the box – 1
d. Unscrew the sides of the box – 2
e. Place the CP-lift with "Locking Plate" down so that the CP-lift can be opened - Minimum 140 cm from the Ground
f. Connect the lift to the power supply (230-240V 50Hz) Neutral - Blue / Power-Brown / Ground-Yellow: Green / and open

the lift to 70% of full opening, by connecting WHITE + RED control cables in POTENTIAL FREE CONTROL wire . Use the

diagram - electrical connection.
g. Take off the "Locking Plate" and remove the transport protection and the "White Masking Plate" masking plate.
h. After removing components needed to next steps of installation, close the CP-lift, by connecting WHITE + BLUE control

cables in POTENTIAL FREE CONTROL wire.

9. Unplug CP-lift wires from supply.

2. INSTALLATION and ADJUSTMENTS:

2A. a. Determine the location for mounting the CP-LIFT lift and drill 4 holes in the ceiling. Use a proper dowels and

screws for the installation surface is the responsibility of the installation team).
b. Insert bolts into dowels through the lift's slotted openings (A) and tighten them securely, Checking proper (axis

X,Y ) leveling when installing the lift to a ceiling.

CP-LIFT

Ceiling lift models:

 CP-LIFT - M
 CP-LIFT - L

A

1/6

LIST OF ITEMS:

 Lift for plasma TV;
 LCD/TV bracket;
 LCD/TV mounting kit;
 Installation manual

2B. Once the lift is mounted on the ceiling, fix the white masking plate (B) by inserting through its openings the plastic

fastening rivets (incl. in the mounting kit).

2C. Attach the 2 elements of the TV bracket (C) to the Display/LCD/ TV mounting points. Ensure that the screws are

inserted at same level in both bracket elements.

PLEASE NOTE: The safety of users and devices depends on the proper installation of the lift and TV. Select the

fastening screws for the TV in accordance with the TV manufacturer's recommendations.

B

C

2/6