Vivotion HG 5001 Instruction Manual

MAGNETIC

HG 5001

BIKE

INSTRUCTION MANUAL

Dear Customers,

We want to thank you for having chosen a Magnetic Bike and
wish you a lot of fun and success during training.

Please follow the enclosed safety and assembly instructions
carefully.

If you have questions please do not hesitate to contact us (0871 230

0380)

Contents:

1.) Safety Instructions

2.) Exploded Drawing

3.) Parts List

4.) Assembly Instructions

5.) Computer Instructions

6.) Training Instructions

1

SAFETY INSTRUCTIONS

Before you start training on your home Magnetic Bike, please
read the instructions carefully. Be sure to keep the
instructions for information, in case of repair and for spare
part delivery.



This magnetic bike is suitable for home use only and tested up to a
maximum body weight of 150 kg.



Follow the steps of the assembly instructions carefully.

For assembly use only suitable tools and asks for assistance with



assembly if necessary.



Check that all connecting elements are tight fitting and are in the
correct condition before first use and then again every 1-2 months.
Replace defective components immediately and/ or keep the
equipment out of use until it has been repaired. For repairs, use
only original parts.



In case of repair, please ask your dealer for advice.

Avoid the use of aggressive detergents when cleaning the home



exerciser.



Ensure that training starts only after correct assembly and
inspection of the item.



For all adjustable parts be aware of the maximum positions to
which they can be adjusted/tightened to.



The home exerciser is designed for adults. Please ensure that
children use it only under the supervision of an adult.

2



Ensure that those present are aware of possible hazards, e.g.
movable parts during training.



Consult your physician before starting with any exercise program.
He or she can advise on the kind of training and which impact is
suitable.

WARNING！！！！INCORRECT/EXCESSIVE TRAINING CAN
CAUSE HEALTH INJURIES.

 Please follow the advice for correct training as detailed in training

instructions.

 The resistance/work level can be adjusted by turning the

adjustment knob on the handle bar stem.

 The safety level of this equipment can be maintained only if it is

check regularly for all assembly procedure mentioned in the
assembly instruction sheet.

 Please check the tightening knobs regularly to notice any wear

and tear.

3

EXPLODED DRAWING

4