Vivotek FD8166-F2-W, FD8166-F2-B Installation
Warning Before Installation
Power off the Network Camera as soon as
smoke or unusual odors are detected.
Contact your distributor in the event of
occurrence.
Do not place the Network Camera on
unsteady surfaces.
Do not insert sharp or tiny objects into the
Network Camera.
Keep the Network Camera away from water.
If the Network Camera becomes wet, power
off immediately.
Contact your distributor in the event of
occurrence.
Do not touch the Network Camera during a
lightning storm.
Do not place the Network Camera in high
humidity environments.
5
0
0
0
2
4
7
0
1
G
Package Contents
1
FD8166
Quick Installation Guide /
Warranty Card
Focus Adjustment Tool
Screws
Software CD
NOTE:
All cables are user-supplied. Use a CAT5 standard UTP
or better quality cable. In order to pass the Ethernet cable
through the routing path, the maximum cable diameter
allowed is 5.2mm.
EN - 2
Physical Description
2
English
Outer View
Release tab
Digital input
DI+ DI-
Max. is 40V.
MicroSD/SDHC/
SDXC
card slot
Leave the slide cover in place if you route cables through the
bottom and then through a hole on the ceiling or wall.
Inner View
Side View
Slide cover
Lens
RJ-45 Socket
Tilt adjustment
screw
Reset button
Screw slot
EN - 3
Loading...