Vivotek FD8163 User Manual
Fixed Dome
FD8163
Network Camera
User’s Manual
2MP • PIR • Auto Focus • WDR Enhanced
Rev. 1.0
VIVOTEK
Table of Contents
Overview
Revision History ...................................................................................................................................... 4
Read Before Use ..................................................................................................................................... 5
Package Contents ................................................................................................................................... 5
Symbols and Statements in this Document ............................................................................................. 5
Physical Description ................................................................................................................................ 6
Installation ............................................................................................................................................... 9
Network Deployment ............................................................................................................................. 11
Software Installation .............................................................................................................................. 14
Ready to Use ......................................................................................................................................... 15
Completion ......................................................................................................................................... 17
Accessing the Network Camera
Using Web Browsers ............................................................................................................................. 18
Using RTSP Players .............................................................................................................................. 21
Using 3GPP-compatible Mobile Devices ............................................................................................... 22
Using VIVOTEK Recording Software .................................................................................................... 23
Main Page
Client Settings
Conguration
System > General settings .................................................................................................................... 32
System > Homepage layout ................................................................................................................. 34
System > Logs ...................................................................................................................................... 37
System > Parameters ........................................................................................................................... 38
System > Maintenance .......................................................................................................................... 39
Security > User Account ........................................................................................................................ 43
Security > HTTPS (Hypertext Transfer Protocol over SSL) ........................................................44
Security > Access List ......................................................................................................................... 51
Network > General settings ................................................................................................................... 56
Network > Streaming protocols ........................................................................................................... 64
Network > SNMP
Media > Image .................................................................................................................................... 74
Media > Video ....................................................................................................................................... 82
Media > Video ....................................................................................................................................... 83
Media > Audio........................................................................................................................................ 87
PTZ > PTZ settings ............................................................................................................................... 88
Event > Event settings........................................................................................................................... 92
Applications > Motion detection........................................................................................................... 105
Applications > DI and DO .................................................................................................................... 108
Applications > Tampering detection ....................................................................................................108
Recording > Recording settings ......................................................................................................... 109
Local storage > SD card management ................................................................................................ 114
Local storage > Content management ................................................................................................ 11 5
Appendix
.....................................................................................................................................................
............................................................................................................
.................................................................................................................................................
..........................................................................................................................................
............................................................................................................................................
(Simple Network Management Protocol) ......................................................73
................................................................................................................................................
4
18
24
29
31
118
2 - User's Manual
VIVOTEK
URL Commands for the Network Camera ................................................................................................ 118
Technical Specications ...........................................................................................................................120
Technology License Notice ....................................................................................................................... 121
Electromagnetic Compatibility (EMC) .......................................................................................................122
User's Manual - 3
VIVOTEK
Overview
VIVOTEK FD8163 is an easy-to-use fixed dome network camera, featuring 2-Megapixel or
1080p Full HD resolution with superb image quality up to 30 fps. As a true day/night camera, the
FD8163 features a removable IR-cut lter and 15 meter smart IR illuminators, maintaining clear
images 24 hours a day. It is especially suitable for monitoring wide open indoor areas such as a
building lobby, train station, or applications requiring accurate identication.
For installers, properly adjusting the focus of a megapixel network camera can be difcult due to
the image detail. Thus, VIVOTEK has introduced the Smart Focus System including Easy Focus
Button and Remote Focus to make installation and adjustment easier. VIVOTEK has adopted
lenses with a built-in stepper motor that the installer can use to remotely control the focal
length and precisely adjust the camera focus, offering hassle-free installation and maintenance.
Furthermore, the unique design featuring four-step mounting also facilitates installation of the
FD8163.
Together with a PIR sensor for enhanced detection, WDR Enhanced, 802.3af compliant PoE,
tamper detection, microSD/SDHC/SDXC card slot for on-board storage, video cropping, and
e-PTZ functionality, the FD8163 is indisputably the top choice for reliable and high performance
surveillance.
Revision History
■ Rev. 1.0: Initial release
4 - User's Manual
VIVOTEK
i
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Package Contents
■ FD8163
■ Alignment sticker
■ T10 Torx screwdriver / Screws / DC connector / Plastic Anchors / AV cable
■ Software CD
■ Warranty Card
■ Quick Installation Guide
Symbols and Statements in this Document
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING! or IMPORTANT!: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.
User's Manual - 5
VIVOTEK
Physical Description
Camera Front View
Lens
Built-in
Microphone
Remove foam pad.
IR LEDs
(8 units, effective up to
15m)
Black Cover
Light Sensor
Auto Focus Button
Camera Rear View
Micro SD/SDHC
Card Slot
Reset Button
Jumpers
Microphone
internal
external
1 2
Video Output
NTSC
60Hz
PAL
50Hz
Reset
Micro SD Card
Int. NTSC
PALExt.
Audio/Video Out
(green)
Microphone In (pink)
10/100BaseT
PIR Sensor
Ethernet
Audio InAV Out
Ethernet
NOTE:
The max. output load from
pins #7 and 8 is 50mA.
123 74 5 86
General IO Terminal
Block
1 DC 12V2 DC 12V+
3 AC24V_2
4 AC24V_1
5 DI- (GND)
6 DI+
7 DO8 DO+ (+12V)
6 - User's Manual
DI/DO Diagram
12V
Please refer to the following illustration for the connection method.
+12V
PIN 8
Power+12V
PIN 7
Digital output
VIVOTEK
PIN 6
Digital input
PIN 5
Ground
BJT transistor
NOTE:
Gnd
Camera Power
Input
Output
Gnd
5
8
6
7
VDC
Switch
Relay
+12
VDC
Max.
Camera Power
BJT transistor
Input
Output
5
8
VDC
+12
Switch
6
7
VDC
Relay
The maximum output load from pins #7 & 8 is 50mA.
User's Manual - 7
VIVOTEK
Hardware Reset
Micro SD Card
Recessed Reset
Button
Reset
NTSC
Int.
Ext.
PAL
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Ethernet
12 3 74 5 86
Audio InAV Out
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that
all settings will be restored to factory default. Upon successful restore, the status LED will blink
green and red during normal operation.
Micro SD/SDHC Card Capacity
This network camera is compliant with Micro SD/SDHC/SDXC 8GB, 16GB, 64GB and other
preceding standard SD cards.
8 - User's Manual
VIVOTEK
Installation
Removing Dome Cover
Use the included T10 Torx screwdriver to loosen screws on the sides of dome cover to
remove it. You should then jot down the MAC address printed on the bottom of the camera.
Dome Cover
Bottom of the Camera
FD8163
IMPORTANT!
Before installing your camera, make sure the built-in PIR (Passive Infrared Sensor) can be
directed toward the area of interest, where intrusions may occur. (The sensitivity of PIR
sensor depends on the object size and temperature differences between the object and the
background environment.)
50
5m
5m
41
50
41
User's Manual - 9
VIVOTEK
NOTE:
You may use the included AV cable to connect a camera tester for initial conguration at
the installation site.
LCD Monitor/
Camera tester
Ceiling Mount
AV Out
Wall Mount
1. Attach the alignment sticker to the ceilling/wall.
2. Through the two circles on the sticker, drill two pilot holes into the ceilling/wall.
3. The Network Camera can be mounted with the cable routed through the ceiling/wall or
from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A
as shown in the above picture.
4. Hammer the supplied plastic anchors into the holes.
5. Align the two holes on each side of the camera base with the two plastic anchors on the
ceilling/wall, insert the supplied screws to corresponding holes and secure them with a
screwdriver.
10 - User's Manual
VIVOTEK
Network Deployment
General Connection (without PoE)
1. If you have external DI devices, make the connection from general I/O terminal block.
2. Ethernet, power, and other cables are user-supplied.
3. Connect the AC cables from the terminal block as an alternate power source. The IO cables
are user-supplied.
NOTE:
Pin #3 & 4 AC 24V as alternate power
are for indoor use only
Ethernet
Switch
Pin3 & 4 AC 24V
L
I
N
POW
ER
C
OLL
I
S
ION
1
K
RE
CEIVE
PARTITIO
2
3
N
4
5
Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Follow the below illustration to connect the Network Camera to a PoEenabled switch via Ethernet cable.
NOTE:
1. This equipment is only to be
connected to PoE networks without
routing to outside plants.
2. For PoE input connections, use only
UL listed I.T.E. with PoE output.
L
I
N
POW
ER
C
OLL
I
S
ION
K
RE
CEIVE
1
PARTITIO
2
N
3
4
5
PoE Switch
User's Manual - 11
VIVOTEK
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a
non-PoE switch.
PoE Power
Injector
(optional)
Non-PoE Switch
L
I
N
POW
ER
C
O
LL
I
S
ION
K
RE
CEIVE
1
PARTITIO
2
3
N
4
5
12 - User's Manual
VIVOTEK
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 14 for
details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
Internet
Cable or DSL Modem
WAN (Wide Area Network )
Router IP address : from ISP
LINK
POWER
COLLISION
RECEIVE
1
2
PARTITION
3
4
5
LAN (Local Area Network)
Router IP address : 192.168.0.1
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port: default is 80
■ RTSP port: default is 554
■ RTP port for audio: default is 5558
■ RTCP port for audio: default is 5559
■ RTP port for video: default is 5556
■ RTCP port for video: default is 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please refer
to your router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 56 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 56 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 57 for details.
User's Manual - 13
VIVOTEK
Software Installation
Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up
your Network Camera on the LAN.
IW
1. Install IW2 under the Software Utility directory from the software CD.
Double-click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.
2
Installation
Wizard 2
3. The program will search for all VIVOTEK network devices on the same LAN.
4. After a brief search, the installer window will prompt. Click on the MAC and model name
that matches the one printed on the product label. You can then double-click on the address to
open a management session with the Network Camera.
Network Camera
Model No: FD8163
MAC:0002D1730202
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
R o HS
Made in Taiwan
00-02-D1-73-02-02 192.168.5.151 FD8163
0002D1730202
14 - User's Manual
VIVOTEK
Ready to Use
1. A browser session with the Network Camera should prompt as shown below.
2. You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras. For
its installation details, please refer to its related documents.
To adjust the viewing angle -- 3-axis mechanism design
Based on the live image retrieved from the camera, adjust the camera lens to the desired view
angle:
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both sides of the camera and then turn the lens module
up and down. Upon completion, tighten the screws.
3. Turn the lens to adjust the image orientation.
3
2
Rotate 350°
1
Pan 350°
Tilt 65°
User's Manual - 15
VIVOTEK
To adjust the zoom factor and focus range
1. The camera comes with a motorized varifocal lens module. With a web console,
you can enter the Configuration > Media
> Image > Focus page to tune the image
zoom and focus.
2. On this page, you can pull the Zoom and
Focus pointers, set up a Focus window,
Focus window
and use the Perform auto focus button to
automatically obtain an optimal focus result.
You may also manually fine-tune zoom and
focus using the various functional buttons.
Please refer to your User Manual for more
information.
3. You may also push the Auto Focus button on the camera
to obtain the same results especially when you are using
camera tester for onsite adjustment.
16 - User's Manual
VIVOTEK
Completion
1. If you choose to feed the cable through the ceiling/wall, arrange the cables neatly
through the cable hole A (not shown in the drawing). If you choose to feed the cable from
the side, remove plate B.
2. Attach the dome cover to the camera as the direction shown below. Tighten two screws
from the sides of the dome cover.
3. Finally, make sure all parts of the camera are securely installed.
1
2
Dome Cover
A
3
B
Be aware of the
cable route!
User's Manual - 17
VIVOTEK
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN.
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1. Launch your web browser (ex. Microsoft
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. The live video will be displayed in your web browser.
4. If it is the rst time installing the VIVOTEK network camera, an information bar will pop up as
shown below. Follow the instructions to install the required plug-in on your computer.
®
Internet Explorer, Mozilla Firefox, or Netscape).
NOTE
NOTE:
► For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream the live
video. If you don’t have Quick Time on your computer, please download it rst, then launch
the web browser.
18 - User's Manual
VIVOTEK
► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 74.
► If you see a dialog box indicating that your security settings prohibit running ActiveX
®
Controls, please enable the ActiveX
Controls for your browser.
®
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX
®
controls; select Enable or Prompt. Click OK.
3. Refresh your web browser, then install the ActiveX
complete installation.
®
control. Follow the instructions to
User's Manual - 19
VIVOTEK
1. For a megapixel camera, it is recommended to use monitors of the 24" size or
2. Below are the defaults for Audio settings:
IMPORTANT!
Currently the Network Camera utilizes 32-bit ActiveX plugin. You CAN NOT
•
open a management/view session with the camera using a 64-bit IE browser.
If you encounter this problem, try execute the Iexplore.exe program from C:\
•
Windows\SysWOW64. A 32-bit version of IE browser will be installed.
On Windows 7, the 32-bit explorer browser can be accessed from here:
•
C:\Program Files (x86)\Internet Explorer\iexplore.exe
NOTE:
larger, and are capable of 1600x1200 or better resolutions.
For cameras with built-in microphone: Not Muted.
For cameras without built-in microphone: Muted.
To receive audio into from external microphone, you may need to enable the audio
input from Media > Audio. Refer to page 88 for more information.
20 - User's Manual
VIVOTEK
Using RTSP Players
To view the MPEG-4 streaming media using RTSP players, you can use one of the following
players that support RTSP streaming.
Quick Time Player
VLC media player
mpegable Player
1. Launch the RTSP player.
2. Choose File > Open URL. A URL dialog box will pop up.
pvPlayer
3. The address format is rtsp://<ip address>:<rtsp port>/<RTSP streaming access name for
stream #1, #2, #3, or #4>
As most ISPs and players only allow RTSP streaming through port number 554, please set the
RTSP port to 554. For more information, please refer to RTSP Streaming on page 65.
For example:
rtsp://192.168.5.151:554/live.sdp
4. The live video will be displayed in your player.
For more information on how to configure the RTSP access name, please refer to RTSP
Streaming on page 65 for details.
Video 16:38:01 2012/01/25
User's Manual - 21
VIVOTEK
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page
11.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 65.
2. As the the bandwidth on 3G networks is limited, you will not be able to use a large video size.
Please set the video and audio streaming parameters as listed below.
For more information, please refer to Stream settings on page 85.
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 65.
4. Launch the player on the 3GPP-compatible mobile devices (e.g., VLC Player).
5. Type the following URL commands into the player.
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream # with small frame size and frame rate>.
For example:
You can configure Stream #3 into the suggested stream settings as listed above for live
viewing on a mobile device.
22 - User's Manual
VIVOTEK
Using VIVOTEK Recording Software
The product software CD also contains an ST7501 recording software, allowing simultaneous
monitoring and video recording for multiple Network Cameras. Please install the recording
software; then launch the program to add the Network Camera to the Channel list. For detailed
information about how to use the recording software, please refer to the user’s manual of the
software or download it from http://www.vivotek.com.
User's Manual - 23
VIVOTEK
VIVOTEK INC.
Logo
Camera Control
Area
Configuration
Area
Host Name
Resize Buttons
Live View Window
Hide Button
Main Page
This chapter explains the layout of the main page. It is composed of the following sections:
VIVOTEK INC. Logo, Host Name, Camera Control Area, Configuration Area, Menu, and Live
Video Window.
VIVOTEK INC. Logo
Click this logo to visit the VIVOTEK website.
Host Name
The host name can be customized to t your needs. For more information, please refer to System on page 32.
Camera Control Area
Video Stream: This Network Camera supports multiple streams (stream 1 ~ 2) simultaneously. You can
select either one for live viewing. For more information about multiple streams, please refer to page 85
for detailed information.
Manual Trigger: Click to enable/disable an event trigger manually. Please configure an event setting
on Application page before enable this function. A total of 3 event settings can be congured. For more
information about event setting, please refer to page 92. If you want to hide this item on the homepage,
please go to Conguration> System > Homepage Layout > General settings > Customized button
to deselect “show manual trigger button”.
Digital Output: Click to turn the digital output device on or off.
24 - User's Manual
VIVOTEK
PTZ Panel: This Network Camera supports “digital“ (e-PTZ) pan/tilt/zoom control. Please refer to PTZ
settiings on page 89 for detailed information.
Global View: Click on this item to display the Global View window. The Global View window contains a
full view image (the largest frame size of the captured video) and a oating frame (the viewing region of
the current video stream). The oating frame allows users to control the e-PTZ function (Electronic Pan/
Tilt/Zoom). For more information about e-PTZ operation, please refer to E-PTZ Operation on page 89.
For more information about how to set up the viewing region of the current video stream, please refer to
page 85.
The viewing region of
the current video
stream
The largest frame size
Conguration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 29.
Conguration: Click this button to access the conguration page of the Network Camera. It is suggested
that a password be applied to the Network Camera so that only the administrator can configure the
Network Camera. For more information, please refer to Conguration on page 31.
Language: Click this button to choose a language for the user interface. Language options are available
in: English, Deutsch, Español, Français, Italiano,
日本語
, Português,
簡体中文
, and
繁體中文
. Please
note that you can also change a language on the Conguration page; please refer to page 31.
Hide Button
You can click the hide button to hide the control panel or display the control panel.
Resize Buttons
:
Click the Auto button, the video cell will resize automatically to t the monitor.
Click 100% is to display the original homepage size.
Click 50% is to resize the homepage to 50% of its original size.
Click 25% is to resize the homepage to 25% of its original size.
User's Manual - 25
VIVOTEK
H.264 / MPEG-4 Protocol and Media Options
Live Video Window
■ The following window is displayed when the video mode is set to H.264 / MPEG-4:
Video Title
Title and Time
Zoom Indicator
Video (TPC-AV)
Video 17:08:56 2011/06/25
x4.0
2011/02/25 17:08:56
Time
Video and Audio Control Buttons
Video Title: The video title can be congured. For more information, please refer to Video Settings on
page 85.
H.264 / MPEG-4 Protocol and Media Options: The transmission protocol and media options for H.264 /
MPEG-4 video streaming. For further conguration, please refer to Client Settings on page 29.
Time: Display the current time. For further conguration, please refer to Media > Image > Genral settings
on page 74.
Title and Time: The video title and time can be stamped on the streaming video. For further conguration,
please refer to Media > Image > General settings on page 74.
26 - User's Manual
VIVOTEK
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
conguration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnied. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen.
Pause: Pause the transmission of the streaming media. The button becomes the Resume button
after clicking the Pause button.
Stop: Stop the transmission of the streaming media. Click the Resume button to continue
transmission.
Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer.
Press the
Stop MP4 Recording button to end recording. When you exit the web browser, video
recording stops accordingly. To specify the storage destination and le name, please refer to MP4 Saving
Options on page 30 for details.
Volume: When the Mute function is not activated, move the slider bar to adjust the volume on the
local computer.
Mute: Turn off the volume on the local computer. The button becomes the Audio On button after
clicking the Mute button.
Talk: Click this button to talk to people around the Network Camera. Audio will project from
the external speaker connected to the Network Camera. Click this button
again to end talking
transmission.
Mic Volume: When the Mute function is not activated, move the slider bar to adjust the
microphone volume on the local computer.
Mute: Turn off the Mic volume on the local computer. The button becomes the Mic On button
after clicking the Mute button.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
User's Manual - 27
VIVOTEK
■ The following window is displayed when the video mode is set to MJPEG:
Video Title
Title and Time
Video (HTTP-V)
Video 17:08:56 2011/06/25
2011/02/25 17:08:56
Time
Video Control Buttons
Video Title: The video title can be congured. For more information, please refer to Media > Image on
page 74.
Time: Display the current time. For more information, please refer to Media > Image on page 74.
Title and Time: Video title and time can be stamped on the streaming video. For more information, please
refer to Media > Image on page 74
.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
conguration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnied. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen.
Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer.
Press the
Stop MP4 Recording button to end recording. When you exit the web browser, video
recording stops accordingly. To specify the storage destination and le name, please refer to MP4 Saving
Options on page 30 for details.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
28 - User's Manual
VIVOTEK
Client Settings
This chapter explains how to select the stream transmission mode and saving options on the
local computer. When completed with the settings on this page, click Save on the page bottom
to enable the settings.
H.264 / MPEG-4 Media Options
H.264/MPEG-4 Media Options
Select to stream video or audio data or both. This is enabled only when the video mode is set to H.264 or
MPEG-4.
H.264 / MPEG-4 Protocol Options
H.264/MPEG-4 Protocol Options
Depending on your network environment, there are four transmission modes of H.264 or MPEG-4
streaming:
UDP unicast: This protocol allows for more real-time audio and video streams. However, network
packets may be lost due to network burst trafc and images may be broken. Activate UDP connection
when occasions require time-sensitive responses and the video quality is less important. Note that each
unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up
to ten simultaneous accesses.
UDP multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media. This helps to reduce the network transmission load of the Network Camera
while serving multiple clients at the same time. Note that to utilize this feature, the Network Camera must
be configured to enable multicast streaming at the same time. For more information, please refer to
RTSP Streaming on page 65.
TCP: This protocol guarantees the complete delivery of streaming data and thus provides better video
quality. The downside of this protocol is that its real-time effect is not as good as that of the UDP protocol.
HTTP: This protocol allows the same quality as TCP protocol without needing to open specic ports for
streaming under some network environments. Users inside a firewall can utilize this protocol to allow
streaming data through.
User's Manual - 29
VIVOTEK
MP4 Saving Options
Users can record live video as they are watching it by clicking Start MP4 Recording on the main
page. Here you can specify the storage destination and le name.
Folder: Specify a storage destination for the recorded video les.
File name prex: Enter the text that will be appended to the front of the video le name.
Add date and time sufx to the le name: Select this option to append the date and time to the end of the
le name.
CLIP_20110628-180853
File name prefix
Date and time suffix
The format is: YYYYMMDD_HHMMSS
Local Streaming Buffer Time
In a busy network, fluctuations in available bandwidth can occur. Video streaming may lag and may
not proceed very smoothly. If you enable this option, video streams from the camera will be temporarily
stored on the computer’s cache memory for a configurable period of time (seconds or milliseconds)
before being played on a web session. This will help you see the streaming more smoothly. If you enter
3000 Millisecond, the streaming will delay for 3 seconds.
30 - User's Manual
Loading...