Vivitar Vivicam 2010 User Manual
1
Vivicam 2010 User manual
English 20100001
1 Introduction-------------------------------------------------------------
1
Overview-----------------------------------------------------------------
1
Warnings and Precautions------------------------------------------
1
Package Contents-----------------------------------------------------
3
System Requirements------------------------------------------------
4
Camera Features------------------------------------------------------
5
2
Inserting the Batteries------------------------------------------------
6
3
Insert/Remove SD/MMC Memory Cards------------------------
8
4 Capturing Images-----------------------------------------------------
9
Power On the Camera-----------------------------------------------
9
Power Off the Camera------------------------------------------------
9
5
Camera Status Icons-------------------------------------------------
10
6 Display Information and flows--------------------------------------
11
7
Capture an Image-----------------------------------------------------
15
8
Using Flash-------------------------------------------------------------
16
9 Self-Timer---------------------------------------------------------------
17
10
AVI Capture-------------------------------------------------------------
18
11 Continuous Capture--------------------------------------------------
19
12
Deleting Images--------------------------------------------------------
19
Delete the Last Image------------------------------------------------
19
Delete All Images------------------------------------------------------
19
Techniques for Capturing the Best Images----------------------
21
13
Installing Camera Driver and Software---------------------------
23
14
Uninstalling Software ------------------------------------------------
23
Uninstalling Camera Driver -----------------------------------------
23
15
Downloading Images to Your Computer-------------------------
24
For Windows 98/me customers------------------------------------
24
For Windows XP-------------------------------------------------------
24
For Windows 2000/me/98-------------------------------------------
24
16
Arcsoft PhotoImpression 5------------------------------------------
26
17
Arcsoft VideoImpression 2------------------------------------------
28
18
Using the Camera In PC-Cam Mode-----------------------------
31
19
Checking the Connection of Your Camera----------------------
32
20
Internet Video Conferencing----------------------------------------
33
21
Using the camera with NetMeeting--------------------------------
34
22
Specifications-----------------------------------------------------------
35
23
Appendix A--------------------------------------------------------------
36
WARNING
When the battery icon is blinking, down load the pictures to
your computer immediately befo re changing the batteries. A
delay could result in the loss of your images if the batteries
become depleted.
1
1. Introduction
Overview
Thank you for purchasing your digital camera. It can capture digital images,
short video-clips (continuous shooting mode), and it can also serve as a
PC/Web camera. The camera is equipped with 8 MB of memory to store
your images and movie clips. You may download your images and movie
clips to your computer using the USB cable and included software.
Warnings and Precautions
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
2
1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
4. Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B
of Part 15 of the FCC rules. Do not make any changes or modifications to
the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the
equipment.
GENERAL WARNINGS –
Do not use batteries other than those specified for use with the camera. The
use of unsuitable batteries may result in the batteries splitting or leaking and
causing a fire, injury, or soiling of the battery compartment.
When placing batteries in the camera, check the polarity of the batteries
(- and +) to ensure proper orientation. Incorrect polarity may result in the
batteries splitting or leaking and causing a fire, injury , or soiling of the battery
compartment.
Remove the batteries if the camera will not be used for an extended period
of time. The batteries may leak and cause a fire, injury or soiling of the
3
battery compartment. If the batteries leak clean and wipe the battery
compartment carefully and install new batteries. Wash your hands carefully
if you touch the battery fluid. Please note that when you remove the batteries
your images will be lost from the camera memory.
WARNING:
Handling the USB cable on this product may expose you to lead,
a chemical known to the State of California to cause birth defects or other
reproductive harm. Wash your hands after handling.
TRADEMARK INFORMATION -
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
Corporation.
Pentium® is a registered trademark of Intel Corporation. Other names and
products may be trademarks or registered trademarks of their respective
owner.
Package Content s
1. Camera
2. USB cable
3. Software
4. User’s Manual
5. Two AA batteries
6. Hand strap
4
Note: Included components may vary, as specified by local retailers and
locations. Check with your retailer for specifics.
System Requirements
You must use a computer to download the images from your camera. The
computer that you use must meet the following minimum requirements:
1. Windows Me/2000/XP
2. Direct X 8.0, or higher
3. 128 MB RAM
4. 60 MB hard disk space available
5. Available USB port
6. CD-ROM drive
5
Camera Features
6
2. Inserting the Batteries
Step 1: Open the battery door by sliding it down and
then move it outwards from the camera body.
Step 2:
Insert two AA batteries with the polarity as
shown:
Step 3:
Close the battery cover.
Warning: Do not open the battery door when the camera is powered ON.
This will cause all images in memory to be lost immediately. If you open the
battery door when the camera is OFF (when changing the batteries) you
must close the door within thirty (30) seconds or your images will be erased
from memory.
Notes:
1. Always download your images to your computer soon after you have
captured them. Never assume your images will be retained for more
than
three or four days. If the batteries are depleted, your images will be lost.
2. If you must change the batteries, make sure the camera is OFF and then
change the batteries within 30 seconds.
3. If you will not use the camera for a long time (several days, or more)
remove the batteries. The batteries will discharge slowly if left in the
camera. This may cause complete battery discharge as well as loss of
images. The batteries may corrode if left in the camera for extended
periods of time.
4. Dispose of batteries properly in accordance with local laws and
regulations. Do not place them in fire.
7
5. The camera has an automatic power-saving feature. The camera will
turn off automatically if it has not been used after approximately sixty
(60) seconds.
6. When the camera is connected to a computer using a USB cable, it is
not necessary to use batteries because the camera uses the power
provided by the computer through the USB interface.
8
3. Insert/Remove SD/MMC Memory Cards
The camera accepts a Secure Digital (SD) or a Multimedia Card (MMC)
memory card up to 256MB capacity. The memory card takes priority over
the internal memory. Whenever a memory card is inserted the camera will
immediately use the memory card in preference to the internal memory.
Therefore, when a memory card is inserted, the camera will store images
and videos on the memory card. Likewise, the camera will playback
images and videos that are stored on the memory card only. To access
internal memory remove the memory card.
Inserting a Memory Card
Insert an SD or MMC card into the memory card slot located in the battery
compartment, and gently press downward with your finger until it clicks into
place. The contacts should be inserted first and be on the side toward the
batteries.
Removing a Memory Card
Gently press down on the memory card and it will partially eject. Pull the
card out with your fingers.
Note: To use the internal memory (8MB), please remove the memory card
first.
Loading...