Vivitar DVR 781HD, 78056N User Manual

DVR 781HD

Action Camcorder

User Manual

Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective companies.

CONTENTS

Introduction .................................................................................................................................. 2

What’s Included ............................................................................................................................ 3

Parts of the Camcorder ................................................................................................................ 4

Initial Camcorder Setup ................................................................................................................ 5

Main Camcorder Modes ............................................................................................................... 9

Camcorder Technical Specifications ........................................................................................... 10

Camcorder Mounts and Accessories ........................................................................................... 11

Powering On Your Camcorder .................................................................................................... 13

Changing Camcorder Mode ....................................................................................................... 14

Navigating the Menus ................................................................................................................. 15

Video Capture Mode .................................................................................................................. 16

Photo Capture Mode .................................................................................................................. 20

Playback Mode ........................................................................................................................... 24

Menu Options ................................................................................................ ............................. 30

Computer System Requirements ............................................................................................... 43

Installing the Software ................................................................................................................ 44

Connecting the Camcorder to the Computer .............................................................................. 45

Getting Photos and Videos from the Camcorder to the Computer ............................................. 46

Getting Started! .......................................................................................................................... 47

Transferring Images Manually from the Camcorder to the Computer ......................................... 47

Camcorder Maintenance ............................................................................................................ 49

Sakar Warranty Card .................................................................................................................. 50

Technical Support ....................................................................................................................... 51

Troubleshooting .......................................................................................................................... 51

Introduction

Thank you for purchasing this digital HD Action Camcorder. Everything you need to take quality digital videos and photos is included with your camcorder.

Vivitar makes capturing those special moments as easy as possible.

Please read this manual carefully first in order to get the most out of your digital camcorder.

NOTE:

 Your digital action camcorder supports a Micro SD Memory Card (up to 32GB, Class 4 or

higher). In order to use your digital action camcorder normally, please insert the Micro SD Memory card before use. Micro SD Memory cards are not included and need to be purchased separately.

 This camera is a plug and play device. You can download the pictures and videos without

the software by directly accessing the memory card from your computer. We would however recommend that you install the ‘Vivitar Experience Image Manager’ Software to enjoy the full Vivitar experience.

What’s Included

1. Action Camcorder

6. Helmet Mount Strap

2. USB Cable

7. Bicycle Mount

3. Waterproof Casing

8. Helmet Mount

4. Vivitar Experience Installation CD

5. Stand Accessory

NOTE:

 Built-in Lithium Battery included (not shown).  Micro SD Card not included.

Parts of the Camcorder

1. Micro SD Memory Card Slot

9. LED Busy Light Indicator

2. Reset Button

10. LED Charge Light Indicator

3. USB Interface

11. UP / Zoom In Button

4. Power Button

12. MENU / OK (SET) / EXIT Button

5. Microphone

13. DOWN / Zoom Out Button

6. SHUTTER / ENTER / BACK Button

14. MODE Selector: Photo, Video, Playback

7. Wrist Strap Connector

15. LCD Screen

8. Lens

Initial Camcorder Setup

CHARGING THE BATTERY

1. Power off the camera.

2. Use the supplied USB cable to connect the smaller end of the USB cable into the USB slot on the camcorder. Connect the other end to the USB interface of your computer. See images below: 1 and 2.

3. The charge light will turn off when the battery is fully charged. See images below: 3 and 4.

BATTERY INDICATOR

Battery Indicator

Description

The battery level is full.

The battery level is half.

The battery level is low, indicating to prepare for recharging the built-in lithium battery.

If the no battery level icon shows, the battery is almost exhausted and the camcorder automatically turns off after a moments. ‘Low Battery’ flashes once the battery level is completely exhausted and the camcorder automatically turns off after a few seconds.

The following icons appear on the camera and indicate the status of the camera’s battery power level:

INSTALLING THE MICRO SD MEMORY CARD

Make sure a Micro SD Memory card Class 4 or higher (up to 32 GB) has been properly inserted into your camcorder. Micro SD Memory card not included. To properly insert the Micro SD Memory Card:

1. Power off the camcorder.

2. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown on the camcorder (see SD icon by the Micro SD card slot).

3. Gently press the Micro SD Card until you hear a slight clicking sound. This indicates the memory card has been inserted correctly.

4. If the memory card has successfully been inserted an icon appears on the LCD screen.

5. To remove the card, gently press on the edge of the card to release it and pull the card out.

6. If the card is inserted or removed while the camcorder's power is on, it may damage the card and/or any recorded data. Always confirm that the power is off before inserting the card into the camcorder.

NOTE: Make sure there is room on the Micro SD Memory Card to capture images. If the memory card is full, additional images cannot be captured and saved to the card.

TURNING ON AND USING THE CAMERA

Press the POWER button, located on top of the camcorder, to turn on the camcorder.

NOTE: If the camcorder becomes unresponsive, insert a thin pin into the RESET

hole and gently push the pin until you hear a slight ‘click’ sound. The camcorder will

then reset.

Main Camcorder Modes

VIDEO CAPTURE MODE

Use this mode to capture videos with your digital camcorder. Slide the MODE Switch to the Video Capture icon to open the Video Capture Mode. To take a video, aim your camcorder as desired and press the SHUTTER button to start recording. A red record indicator and the elapsed recording time appear on the LCD screen while the recording is in progress. To stop recording, press the SHUTTER button again. The video is automatically saved to your camcorder’s memory card.

PHOTO CAPTURE MODE

Use this mode to capture pictures with your camcorder. Slide the MODE Switch to the Photo Capture icon to open the Photo Capture Mode. To take a picture, aim your camcorder as desired and press the SHUTTER button. The picture is automatically saved to your camcorder’s memory card.

PLAYBACK MODE (PHOTOS & VIDEOS)

Use this mode to view and manage the photos and videos on your camcorder. Slide the MODE Switch to the Playback icon to open the Playback Mode for photos and videos. You can scroll through the photos and videos that you’ve previously taken to view or delete them as desired.

Camcorder Technical Specifications

Image Sensor

CMOS Sensor

Video Resolution

HD 720P (1280X720) VGA (640X480)

Photo Resolution

5MP (2592x1944) 1MP (1280x960) VGA (640x480)

File Format

AVI (Video), JPEG (Photo)

External Memory

Micro SD Memory card, Class 4 or higher, up to 32GB

LCD Display

1.77”TFT

Zoom

4X Digital Zoom

Focus Range

Fixed Focus ; F 3.2, f=5.7mm

White Balance

Auto, Daily, Cloudy, Fluorescent, Tungsten

Light Exposure

±2.0, ±1.7, ±1.3, ±1.0, ±0.7, ±0.3, 0

Metering

Center, Multi, Spot

Language

English, French, Spanish, German, Italian, Portuguese

Auto Power Off

Off, 1 min., 3 min., 5 min.

Interface

USB 2.0

System Requirements

MICROSOFT® Windows XP (SP3), Vista (SP1) or 7 MACINTOSH OSX v10.5.x and above

Battery

Built-in Lithium-ion Battery

Camcorder Mounts and Accessories

WATERPROOF CASE

1. Clamp

2. Shutter Release

3. Power Button

1. Insert a finger at the half circle of the clamp by prying the clamp up - away from the case.

2. Before sealing the case, inspect the water sealing gasket to be sure it’s in good condition. You can test the gasket by closing the case without inserting the camcorder. Submerse the case completely in a bowl of water for about a minute. Remove the case from the water, dry off its exterior with a towel, and then open the case. If the entire interior is dry, the case and gasket are safe for use under water.

3. There are just two buttons required for recording video and images: the Shutter Button and the Power Button.

4. Remember to put the Mode Switch in your desired recording position before inserting the camcorder in the waterproof case. There is no external button for the Mode Switch.

INSTALLING THE BICYCLE MOUNT: HANDLEBAR CLAMP

INSTALLING THE HELMET MOUNTING SYSTEM

MOUNTING ADAPTER

1. This Mounting Adapter allows you to attach mounting accessories that have a ¼-20 screw.

2. The camcorder will clip right into this adapter.

Powering On Your Camcorder

TURNING POWER ON AND OFF

1. Long press the POWER button to turn on the camcorder.

2. Press the POWER button again to turn the power off.

AUTO POWER OFF – POWER SAVING FEATURE:

Your digital camcorder includes an Auto Power Off power feature that automatically turns off your camcorder after a specified time that your camcorder is left idle. The specified time can be set using the ‘Power Save’ menu option. Once the camcorder is automatically powered off, you can long press the POWER button to power on the camcorder.

Changing Camcorder Mode

THREE MAIN MODES

1. Video Capture Mode - Use this mode to capture videos with your camcorder.

2. Photo Capture Mode - Use this mode to capture photos with your camcorder.

3. Playback Mode (for photos and videos) – Use this mode to view your captured photos

and videos.

NOTE: The icons that appear on the LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos and videos.

SWITCHING MODES

After turning on the camcorder, you can move the MODE Switch to change between the three modes in turn:

 In Video Capture Mode, press the SHUTTER button to start recording and press it again

to stop.

 In Photo Capture Mode, press the SHUTTER button to take photo.  In Playback Mode, press the SHUTTER button to play back your captured Video

When in Video Capture Mode, this icon will display on the top-left corner of the LCD display.

When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display

When in Playback Mode, this icon will display on the top-left corner of the LCD display.

Navigating the Menus

PHOTO CAPTURE, VIDEO CAPTURE AND PLAYBACK MENUS

To access the Main Menu for each Mode:

1. Press the OK/MENU button to open the Main Menus for the current mode.

2. Press the  DOWN or  UP button to select a specific menu. The selected option appears highlighted.

3. Press the SHUTTER button to select and enter the highlighted option’s submenu.

4. To select a specific option, press the  DOWN or  UP button and then the OK button to save the selected setting and return to the previous menu.

NOTE:

 To go back from the submenus to the previous menu, press the SHUTTER button.  To exit the Main Menu, press the OK button.

GENERAL CAMCORDER SETTINGS MENUS

To access the General Camcorder Settings Menu:

1. Press the OK/MENU button while in the Photo Capture, Video Capture or Playback Mode.

2. Press the SHUTTER button to select the General Camcorder Settings icon . Press the  DOWN or  UP button to select a specific menu.

The selected option appears highlighted.

3. Press the SHUTTER button to select and enter the highlighted option’s submenu.

4. To select a specific option, press the  DOWN or  UP button and then the OK button to save the selected setting and return to the previous menu.

NOTE:

 To go back from the submenus to the previous menu, press the SHUTTER button.  To exit the Main Menu at any time and return to the previous screen, press the OK button.  Once you change a setting, the setting is saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

 After selecting your desired setting, some settings are displayed as an icon on the LCD

screen in Capture Mode.

+ 36 hidden pages

Vivitar DVR 781HD, 78056N User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual