Vivid Leds Aero PL Installation Manual

Installation Manual of Aero PL LED Parking Lot Light

Please read the installation manual carefully before installation and keep the manual for future use.

W

arning

1

.Electrician must have related certifictes, knowledge and working experience. The work must be assigned to

each electrician based on their position and responsibility.

2.The lens of parking lot light modules are PC material, they may be scratched by any careless handling. The
parking lot light must be carefully protected in installtion, especially when the face of luminaire is put downward, it
needs to be protected with soft cloth or other protecting materials.

3.Installation must be proceeded when the electricity is shut off, no action be taken when there is electricity
connected.

4.Construction must be proceeded according to related regulations, including the tools and equipments used. For
example: working voltage range, Warning sign, flashing lamp, helmet, and working clothes etc.

5.Make sure the weather is suitable for high power electricity work when proceed construction.

Statement

1.Installation of parking lot light must be proceeded with working truck with lifting platform, warning sign and flash
lamp etc.

2.Installation and maintanence of Parking Lot Light must be proceeded when the electricity is off.

1.Installation of parking lot light must be proceeded with working truck with lifting platform, warning sign and flash

lamp etc.

2.Installation and maintanence of Parking Lot Light must be proceeded when the electricity is off.

3.Maintenance must be procceded with professional staff.

Preparation for installation of LED parking lot light

Step 1: Open the package, remove the packing materials and take out the LED Lamp

Step 2: Loose the screws fixing the rotable bracket with Outer hexagonal screw driver

Step 3: Adjust the rotable bracket to desired degree

Step 4

Re-tighten the rotable bracket