viveroo LoopDock User Manual

User manual

LoopDock

viveroo GmbH

Wewelsburger Straße 4

33154 Salzkotten

Germany

www.viveroo.com

REV20150218

Safety information

!!WARNING!!

Please read the assembly instructions included carefully. Please read
this LoopDock user manual completely before using your
LoopDock. Please follow the instructions and recommendations to
ensure proper use and maximum enjoyment.

Safety
information

LoopDock and all LoopDock mounting sets are intended for use in
enclosed and dry living spaces.

The following conditions must be provided:

- Operating temperature between 0° C (32° F) and 35° C (95° F).

- Relative humidity (during use): 20!% to 90!%, non-condensing.

- No external environmental influences such as oil, chemicals, salt,
extensive dust, etc.

Installation, service or repairs, if necessary, may only be performed
by authorized persons.

The installer is responsible for selecting the proper mounting
location and safe installation of LoopDock. This also applies to
installation in movable parts, such as doors. The installer is
responsible for performing and documenting all necessary safety
tests.

All electrical installation work may only be conducted by
authorized, trained electricians, always adhering to the general rules
and regulations applying to electrical installation.

Should it become apparent that safe operation of LoopDock is not
assured, then LoopDock must immediately be taken out of service
and secured against potential misuse. If the LoopDock functions are
limited, blocked or disabled, if an unusual odor is present, if noises
such as scratching are audible or damage is visible, safe operation
can no longer be guaranteed.

!