USING THE IRON
1. FILLING THE IRON WITH WATER
• Pull out the plug and regulate the steam adjustable button to "0" position before filling water.
• Place the iron vertically and open the water filling lid, and fill waterto the "MAX" mark on the iron.
2. HOW TO DO IRONING
• Before ironing determine nature ofthe clothes to be ironed. Please referto th e attached temperature
setting.
• Place the iron vertically.turn the temperature selection according to the back cover,plug in the
suitable power source,then the pilot lamp lights.
• When the lamp switches off,it indicates that the temperature is within the range of your selection.
• Ifsome kind offinish has been applied (gloss,wrinkle, relief etc.),the textile can best be ironed with
lower temperature.
• Classify the clothes according to the different ironing temperature,start uith the lower temperature
clothes.
• If the article is made of a mixture of different fibres, you must all jays select the lowest ironing
temperature ofthe composition of those fibres
.
• Iron the inside of synthetic material and silk to prevent shining spots.
• Velvet and other textures which rapidly acquire shiny spots should be ironed in one direction
only(withthe nap), always keep the iron moving.
3. HOW TO SPRAY WATER
• How to spraywater press the spray button,when ironing heavily creased clothes,you may press the
water spraying button repeatedly,the iron can sprayvaporto accelerate the rate of ironing.
ATTENTION When using the function of powerful steam,burst of steam or water spraying,make sure that
there is enough water in the water tank.
4. BURST OF STEAM IRONING
• Press the burst of steam button quickly there will be a jet of strong steam ejected from the soleplate, it
is helpful for you to iron heavily creased clothes, cuffs or thick clothes, and it can make your ironing
quicker and more efficient.
4