Vivace VRP10-O Installation, Operation And Configuration Manual
INSTALLATION, OPERATION AND CONFIGURATION MAN
September/2016
VRP10-O
PROFIBUS-PA OPTICAL REPEATER
UAL
VRP10-O PROFIBUS-PA OPTICAL REPEATER INSTALLATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
COPYRIGHT
All rights reserved, including translations, reprints, complete or partial reproduction of this
manual, patent concession or model register of use/project.
No part of this publication may be reproduced, copied, processed or transmitted on any manner
or any medium (photocopy, scanning, etc.) without the express permission of Vivace Process
Instruments Inc., not even for training or electronic systems.
PROFIBUS® is a registered mark of PROFIBUS Nutzerorganisation.
NOTE
We have reviewed this manual with great care to maintain compliance with the hardware and
software versions described herein. However, due to the dynamic development and version upgrades,
the possibility of technical deviations cannot be ruled out. We cannot accept any responsibility for the full
compliance of this material.
Vivace reserves the right to, without notice, make modifications and improvements of any kind in
its products without incurring in any circumstances, the obligation to make those same modifications to
products sold previously.
The information in this manual is frequently updated. Therefore, when using a new product,
please check the latest version of the manual on the Internet through our website
www.vivaceinstruments.com, where it can be downloaded.
You customer is very important for us. We will always be grateful for any suggestions for
improvements as well as new ideas, which can be sent to the e-mail: contato@vivaceinstruments.com
preferably with the title "Suggestions".
2
VRP10-O PROFIBUS-PA OPTICAL REPEATER INSTALLATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
SUMMARY
1 EQUIPMENT DESCRIPTION ......................................................................................................... 6
1.1. IDENTIFICATION ........................................................................................................................................... 6
1.2. TECHNICAL AND PHYSICAL SPECIFICATIONS ......................................................................................... 7
1.3. INSTALLATION .............................................................................................................................................. 8
1.4. HOUSING DIMENSION ............................................................................................................................... 10
1.5. BLOCK DIAGRAM ....................................................................................................................................... 11
2 CONFIGURATION ........................................................................................................................ 12
2.1. CONFIGURATION DETAILS AND INDICATIVE LEDS ............................................................................... 12
2.2. CAPACITIVE GROUNDING ......................................................................................................................... 12
3 MAINTENANCE .......................................................................................................................... 13
1.1. ORDERING CODE....................................................................................................................................... 13
4 WARRANTY ................................................................................................................................ 14
4.1. GENERAL CONDITIONS ............................................................................................................................. 14
4.2. WARRANTY PERIOD .................................................................................................................................. 14
APPENDIX ........................................................................................................................................ 15
3
VRP10-O PROFIBUS-PA OPTICAL REPEATER INSTALLATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
WARNING
1
It is extremely important that all the safety instructions, installation and operation in this manual are
followed faithfully. The manufacturer is not liable for damage or malfunction caused by improper use
of this equipment.
It is recommended to strictly following the rules and good practice relating to installation, ensuring
correct grounding, noise insulation and good quality cables and connections in order to provide the
best performance and durability to the equipment.
Special attention must be considered in relation to installations in hazardous areas, where
applicable.
SAFETY PROCEDURE
• Appoint only skilled people, trained with process and equipment;
• Install equipment only in operation compatible areas, with the proper connections and
protections;
• Use proper safety equipment for any handling device in field;
• Turn area power off before equipment installation.
SYMBOLOGY
Caution – indicates risk or error source
Important Information
General or Specific Risk
Electric Shock Danger
4
VRP10-O PROFIBUS-PA OPTICAL REPEATER INSTALLATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
GENERAL INFORMATION
Vivace Process Instruments ensures the operation of this equipment, according to the
descriptions contained in its manual, as well as technical characteristics, not
guaranteeing its full performance in particular applications.
The operator of this equipment is responsible for observing all aspects of safety and
prevention of accidents applicable during the execution of the tasks in this manual.
Failures that might occur in the system, causing damage to property or injury to
persons, shall additionally be prevented by external means to a safe outlet for the
system.
This equipment must be used only for the purposes and methods proposed in this
manual.
DATA SAVING
Whenever static data is changed via configuration, LCD will display icon, which will
be blinking until the save process is complete.
If user wishes to shut down the equipment, he must wait for the process to be finished.
If the equipment is shut down during saving process, a default will be performed, setting
default values in device parameters and the user must subsequently check and configure
those parameters according to his needs.
5
Loading...