Vitus Audio RD-101 Owner's Manual

RD-101
Owner’s Manual
2
RD-101 | Version 1
All rights reserved. No part of this publication may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form, or by any means (electronic, mechanical, photocopying, recording or otherwise) without the prior written permission of Vitus Audio. Any person who does any unauthorized act in relation to this publication may be liable to criminal prosecution and civil claims for damages.
Information contained in this manual is subject to change without notice, and whilst it is checked for accuracy, no liabilities can be accepted for errors.
RD-101 | Version 1
3
on a personal note
Certificate . . . . . . . . . . . . .6
from the creator
Foreword . . . . . . . . . . . . . . 7
introduction
About this manual . . . . . . . . . 8
Introduction to
the Reference Series . . . . . . . . 8
1. getting started
Unpacking the box . . . . . . . . . 9
What’s in the box . . . . . . . . . . 9
2. connecting
Turning the RD-101 on and off. . 10
Connecting the RD-101 . . . . . 11
RD-101 rear panel . . . . . . . . 12
4
RD-101 | Version 1
table of contents
3. operation
Operation modes . . . . . . . .14
Functions – left front panel . . .16 Functions – right front panel . .17 RD-101 Menu: introduction . . . 18 RD-101 Menu: discription
of the elements. . . . . . . . . .20
RD-101 Menu: tree diagram . . . 21
4. operation & service
Installing the Vitus Audio
USB Audio Interface . . . . . . . 22
Installing the driver . . . . . . . . 22
Setting up the Media player. . .23 Installing the driver
on windows 7/8/10 . . . . . . . . 24
Safety notice . . . . . . . . . . . 26
Mains supply voltage . . . . . .26
Maintenance . . . . . . . . . . . 26
Mains fuses . . . . . . . . . . . . 26
Replacing a blown fuse . . . . .27
5. warranty
Warranty . . . . . . . . . . . . .29
6. specifications
RD-101 Specifications . . . . . .32
RD-101 Measurements . . . . . . 33
7. examples operating
Example 1 . . . . . . . . . . . .34
Example 2 . . . . . . . . . . . .35
Example 3 . . . . . . . . . . . .36
Example 4 remote . . . . . . . . 37
Example 4.1 . . . . . . . . . . . . 37
Example 4.2 . . . . . . . . . . . . 37
Example 4.3 . . . . . . . . . . .38
Example 5 . . . . . . . . . . . .39
Example 5.1 . . . . . . . . . . .40
Example 6 . . . . . . . . . . . . . 41
Example 7 . . . . . . . . . . . . . 42
Example 7.1 . . . . . . . . . . .43
Example 7.2 . . . . . . . . . . .44
Example 7.3 . . . . . . . . . . . . 45
Example 7.4 . . . . . . . . . . .46
7. examples connecting devices
Connecting products 1 . . . . .48
Connecting products 2 . . . . .49
7. examples installing software
Installing a media player
Foobar2000 . . . . . . . . . . .50
8. pictures
RD-101 Inside . . . . . . . . . . . 52
RD-101 Front . . . . . . . . . . . 53
RD-101 | Version 1
5
on a personal note
Certificate
Model: RD-101
Product ID/Serial
__________________________________
Product Build Date
__________________________________
Signed
__________________________________
All products details, specifications and measurements are recorded for your RD-101 and kept by Vitus Audio.
6
RD-101 | Version 1
from the creator
Foreword
First of all, thank you for choosing the Vitus Audio RD-101 DAC, we are sure you will enjoy it for many years to come. When purchasing a Vitus Audio product, you are guaranteed a musical performance, which exceeds the current musical standards. Vitus Audio is dedicated to musical performance rather than technical details and high performance measures. We believe that many manufactures are blinded by the current available theory, instead of looking for new answers.
At Vitus Audio everything works until proven not to. This way we always try to push the limits and explore the unexplored. As a result of this, many of the solutions we use today are considered to be “impossible to ever get working”, however they have convinced many people and reviewers world wide of the opposite. Before any of our new topologies are implemented in our products, they are carefully reviewed by our dedicated listening panel. This way we can guarantee the correct level of musically performance and robustness.
Generally we’re after super neutral, super detailed and super dynamic reproduction without “loosing” the nerve in the music which often is a drawback of many high end amplifiers. Our real strongholds are complete silence, unbelievable depth and width in the soundstage resulting in a far more open sound with higher resolution
-you could say, closer to the artist. As a result of the above, our amps do not “focus” on any specific frequencies - i.e. no extension of top or bass, which of course results in high clarity of the midrange since it’s “naturally present”!
Hans Ole Vitus
RD-101 | Version 1
7
introduction
About this manual
This is your RD-101 owner’s manual. The following pages will describe, as clearly as possible, how to get your RD­101 operating fast and simple. Although some operations are self-explanatory, we strongly suggest you read this manual to avoid any damage to the unit. The manual is designed to be helpful. If there are points you feel we could cover better, or that we have missed out – please tell us.
Important
this. Ignoring this information may cause damage to you or the unit. Damage caused to the unit by ignoring this information might invalidate the warranty.
information is presented like
Introduction to the Reference Series
The Vitus Audio Reference Series is a true high-end series of products, which is build on our true dedication to neutral music reproduction. Every detail is carefully thought through, and all choices made during development, where based purely on listening, and not measuring. Only the best available materials are used to ensure an overall quality which will last for many years, when treated right.
8
RD-101 | Version 1
1. getting started
Unpacking the box
After you have opened the top, it is possible to remove the top protective foam which gives you direct access to the unit. In the top you will find the remote, the power cord and brochures. Now remove the side protective foam, this will make it easier to grab hold of the RD-101. Two people carefully lift the unit out of the box, and put it directly onto the floor. Store the empty box and the protective foam for later use.
What’s in the box
USB with Manual & Brochure
Mac Remote
Power Cable
Foam top
RD-101
1. getting started
Foam Sides 6 pieces
RD-101 Mac Remote Power Cable
USB with: Vitus Audio Brochure RD-101 Manual
Foam top Foam Sides 6 pieces Foam bottom Box
RD-101 | Version 1
Foam bottom
Box
Box exploded view
9
2. connecting
Turning the RD-101 on and off.
Always turn on the products beginning from the source:
Digital input a DAC a pre-amplifier a power amplifier.
Always turn off your products in reverse order:
Power amplifier a pre-amplifier a DAC a Digital input.
Not following this procedure,
may cause damage to any
of your products/speakers.
Damage caused to any of your
products/speakers by not
following this procedure will
invalidate the warranty.
10
RD-101 | Version 1
2. connecting
Connecting the RD-101
Digital Inputs.
Input USB B
WI-FI USB A
Ethernet RJ45
Input RCA
Input XLR
Power
Outputs
Ground/Earth
Output RCA
Output XLR
USB B in
WI-FI dongle in
Ethernet in
RCA in
XLR in
Power
Ground
RCA out
XLR out
Place the RD-101 on its shelf. Connect all the sources to the inputs of the RD-101. Connect the outputs of the RD-101. Carefully connect the mains to the DAC, after you have connected both inputs and outputs.
2. connecting
RD-101 | Version 1
11
2. connecting
RD-101 rear panel
RD-101 Rear panel.
Analog ouputDigital input
Fuse
Digital RCA in
WI-FI
dongle
Digital
USB-B in
12
Ethernet
RJ45 in
Digital
XLR in
Analog
RCA out
Analog
XLR out
Ground
RD-101 | Version 1
Power
2. connecting
2. connecting
RD-101 | Version 1
13
3. operation
Operation modes
Figure 6 RD-101 Front panel.
14
RD-101 | Version 1
3. operation
The RD-101 has 3 operation modes
1.Normal mode.
This is the mode you use when listening to music.
2. Menu mode
In this mode you can alter the settings of the RD-101.
RD-101 | Version 1
3. Standby mode.
In this mode the controls of the RD-101 are deactivated.
3. operation
15
3. operation
Functions – left front panel
Figure 7 RD-101 Left front panel.
Normal mode
In normal mode there are 3 basic functions/buttons available on the left front.
1. INPUT Selects between the 6 inputs.
2. MENU Switches to “Menu mode”.
3. STANDBY Switches in and out of “Standby Mode”
16
Menu mode
You enter menu mode, by pushing the ”MENU” button once in Normal mode. In the Menu mode there are 3 basic functions/buttons:
1. Scroll forward in the menu.
2. MENU/ Enter & Exit SELECT submenus and selectsettings.
3. Scroll backward in the menu.
RD-101 | Version 1
3. operation
Functions – right front panel
RD-101 | Version 1
Figure 8 RD-101 Right front panel.
Normal mode
In normal mode there are 3 basic functions/buttons available on the right front:
1.  Turns volume UP.
2. MUTE Mutes the output.
3.  Turns volume DOWN.
3. operation
Menu mode
In the text-menu it is possible to change the name of the input. This is done by using the following buttons from the right front:
1.  Change selected character.
2. MUTE Go to the next character in the display.
3. Change selected character.
17
Loading...
+ 37 hidden pages