Vitrex AGR900 Safety And Operating Manual

Angle Grinder

Safety and Operating Manual

Always wear Vitrex Protective Equipment when using

hand or power tools.

Safety First

Waste electrical products should not be disposed of

with household waste.

Please recycle where facilities exist. Check with your

Local Authority or retailer for recycling advice.

Environmental Protection

ANGLE GRINDER

Owner’s Safety and Operating Manual

You must abide by certain safety precautions when using the grinder. In order to prevent injuries
and damages from occurring, you must always read through this operating manual carefully.

This manual must be kept in a safe place so that the information that it contains is always available. This
operating manual must accompany the equipment if it is transferred to somebody else.

We do not accept any liability for accidents or damage arising from ignoring this manual and the safety
instructions.

SPECIFICATIONS

Model No. AGR900 Speed 12000RPM

Power 900W Hand/Arm Vibration 1.5m/s2

Voltage 230V-240V 50Hz Sound Rating Lpa:86dB(A) Lwa:99.6dB(A)

Protection Class

Double Insulated

Disc Diameter 115mm

SAFETY INSTRUCTIONS

1

Tel: [phone]

IMPORTANT! Read all the warnings and instructions. Failure to comply with the warnings and

instructions may cause electric shock, re and/or serious injuries. Strict observance of these
warnings with the use of personal protective equipment minimizes risks of accidents but does not
completely rule them out. Use the appliance as described in these instructions. Do not use it for
which it was not intended. These instructions refer to an appliance that is manufactured in several
models and versions. Carefully read and observe the safety standards and operational instructions
provided hereafter. Store all warnings and instructions for future reference.

The term ‘Power Tool’ in the warnings refers to the machine tools operated by means of (wired) connection to
the electric power supply or battery (wireless).

Important! The Angle Grinder is suitable, when used with the appropriate discs, for the
grinding, sanding, wire brushing, polishing and abrasive cutting of materials such as metal,
wood, plastic and dry bricks. It is prohibited to use dangerous materials in environments
with risk of re/explosion.

2

SAFETY IN THE WORK AREA

• Keep the work area clean and well lit. Overcrowded and/or badly lit areas may cause accidents.

• Do not operate power tools in explosive atmospheres, e.g. in the presence of ammable liquids,

gases or powders. Power tools create sparks that may ignite powders or fumes.

• Keep children and unauthorised personnel at a distance when operating a power tool.

Distractions may cause you to lose control of the tool.

• Keep the nylon packaging bags in a safe place. Bags can cause suocation and must be kept out

of the reach of children.

• Use the tool in a well-ventilated area. Ventilation is necessary for cooling the tool and for eliminating
air impurities produced when working.

• Do not operate power tools outdoors in the presence of rain, fog, storms, high or low
temperatures, or in damp or wet environments. Use in these conditions may cause electrocution.

Tel: [phone]

ELECTRICAL SAFETY

• The power tool plug must correspond to the socket and power supply. Never modify the plug
in any way. Do not use adapters with earthed power tools. Unmodied plugs and suitable sockets

reduce the risk of electric shocks.

• Do not allow the body of the appliance to come into contact with earthed surfaces such as
pipes, radiators, cookers and refrigerators. If the body is earthed, the risk of electric shock increases.

• Do not expose power tools to rain and do not use them in wet environments. Water permeating

into power tool increases the risk of electric shocks.

• Do not let the cable become worn. Never use the cable to transport, pull or disconnect the
power tool from the power supply socket. Keep the cable away from heat, oil, sharp edges or
moving parts. Damaged or twisted cables increase the risk of electric shocks.

• When using a power tool outdoors, use an extension cable suitable for outdoor use. The use of a

suitable cable reduces the risk of electric shock.

• Use an electric power supply protected by a dierential switch (RCD). The use of a suitable
residual current device (RCD) reduces the risk of electric shock. Consult your electrician.

• Frequently check the power supply cable. Do not crush or tread on the power supply cable. A
damaged cable causes electric shock.

• In case of doubt regarding electricity, consult an experienced technician. The unsafe use of
electricity is very dangerous for yours and other people’s safety.

PERSONAL SAFETY

• Never allow yourself to be distracted. Control what you are doing and use your common sense
when using power tools. Never use the tool when you are tired or under the inuence of drugs,

alcohol or medicines. A moment of distraction when using power tools could cause serious personal
injuries.

• Use personal protective equipment. Always wear eye protection. Protection equipment such
as dust repelling masks, anti-slip safety shoes, gloves, safety helmets, or ear protection reduces the
possibility of personal injuries.

• Prevent switching the appliance on accidentally. Make sure that the switch is in the o position
before connecting the tool to the electric supply and/or to battery units and before taking or

transporting it. Carrying power tools with your nger on the switch or connecting them to the electric

power supply with the switch in the on position can cause accidents.

• Remove any adjustment wrench before switching on the power tool. Any key or spanner left
attached to a rotating part of the power tool may cause personal injuries.

• Do not lose your balance. Always keep an appropriate position and balance. This allows better
control of the power tool in unexpected situations.

• Wear appropriate clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose clothing, jewellery or long hair may get entangled in the

moving parts.

3

USE AND MAINTENANCE OF POWER TOOLS

• Do not force the power tool. Use a suitable tool for the operation to be carried out. An appropriate

power tool can perform the work with higher eciency and safety without having to exceed the

parameters intended for its use.

• Do not use the power tool if the on/o switch is not activated properly. Any power tool that cannot
be controlled by it’s switch is dangerous and must be repaired before use.

• Disconnect the plug from the power supply and/or from the power tool battery unit before any
adjustment, replace the accessories or store the power tools. These preventive safety measures

reduce the risk of accidental start of the power tool.

• Store unused power tools out of reach of children and do not allow them to be used by any
unskilled people or those who are not aware of these instructions. Power tools are dangerous if

used by unskilled people.

• Carry out the required maintenance on power tools. Check any possible misalignment or
locking of the moving parts, any breakage of the parts and any other condition that may aect
the operation of power tools. If there is any damage, the power tool must be xed before use.

Numerous accidents are caused by improper maintenance of power tools.

• Keep the cutting elements, where tted, clean and sharpened. Cutting elements in good conditions
and with sharp edges are less likely to lock and can be controlled more easily.

• Use the power tool, accessories and abrasive parts, etc. according to these instructions,
considering the work condition and the operation to be performed. The use of the power tool for

operations other than those for which it is intended may cause dangerous situations.

• Keep a safe distance from moving parts. Touching moving parts causes serious injuries.

• Do not modify the power tool. Taking o, replacing or adding components not included in the

instructions is prohibited and causes the warranty to become null and void.

• Do not leave the power tool running unattended. Turn it o before leaving it unattended in order to

prevent any accidents.

• The power tool must never come into contact with water or other liquids. Use in these conditions
may cause electrocution.

Tel: [phone]

• If any devices to be connected to dust extraction and collection systems are provided, make

sure that they are connected and used appropriately. The use of these devices may reduce the
risks connected with dust.

• The user is responsible for other people as far as accidents or damage to people or property are

concerned. Improper use causes accidents and damage.

• Never use with bare or wet feet/hands. Use in these conditions may cause electrocution.

• Processing of harmful materials must be performed in compliance with the laws in force. Some

types of dust and material such as metals, wood, paints, etc. are very harmful to health. Protect yours
and other people’s health using suitable protections and devices.

• Do not approach the cooling air ejection slots. The air generated may contain machining residuals
and small parts that are harmful for your respiratory tracts and eyes.

• Do not cover or insert things in the cooling slots. Unsuitable ventilation of the power tool may start a

re. Accessing the internal parts may damage the tool and cause electrocution.

• Do not use the power tool if the guard is open, damaged or missing. Correctly installed guards
protect your health and allow safe use.