Vitrex Versatile Pro 750, 750 Owner's Safety And Operating Manual

PRO 750 WET SAW

Owner’s Safety and Operating Manual

103420

Read manual before use. Keep hands arms and face clear

of blade whilst in use. Always have safety guard in place

when machine is switched on at the mains.

Always wear Vitrex Protective Equipment when using

hand or power tools.

Safety First

POWER

Everest Road
Lytham St Annes
Lancashire

FY8 3AZ
Tel: [phone]

Fax: [phone]
www.qep.com

02 03

Owner’s Safety and Operating Manual

Contents

Safety Instructions ................................................... 3

Machine Specication & Electrical Requirements ......4

Assembly & Operating Instructions ...................... 5-6

Maintenance & Warranty .........................................7

POWER PRO 750 Wet Saw

POWER PRO 750 Wet Saw

Safety Instructions

To use this tool correctly, you must
observe the Safety Regulations, the
Assembly Instructions and the Operation
Instructions contained in this Manual.

All persons who use and service the
machine must be acquainted with this
Manual and must be informed about any
potential hazards.

Children and inrm people must not use

this tool. Children must be supervised at
all times if they are in the area in which
the tool is being used.

It is also imperative that you observe the
accident prevention regulations in force in
your area. The same applies for general
rules of occupational health and safety.

• Take suitable precautions to protect

your eyes, ears, lungs and hands
when operating the Wet Saw.

• Keep children and others away from

the machine whilst in use.

• Only use circular blades with

a continuous rim– DO NOT USE
segmented circular blades, saw blades

or abrasive disks.

• The machine should be used indoors

only, in a clean, dry,well lit area and

on a clutter free, at work surface.

• Avoid wearing loose clothing, ties,

rings, bracelets or other loose items
which may become caught in the
moving parts. Long hair should also

be tied back or contained.

• Always ensure that all loose tools and

components are removed from the

immediate working area.

• Switch machine off between cuts and

disconnect from mains supply before
carrying out any maintenance,
cleaning or changing the blade.

• Do not leave the saw running

unattended or touch the blade whilst
in motion – always use the blade guard
when cutting.

• Replace damaged blades immediately
and ensure that new blades are tted

correctly to run in the direction
indicated on the blade.

• Only recommended replacement parts

should be used with this machine – use of
improper accessories could cause serious
injury

Automatic Overload
Protection

To prevent overheating this machine has
automatic overload protection which is
designed to cut power to the motor.

Should the automatic overload protection
trip, ensure that mains power supply and
machine switch are turned off.

After ten seconds press the breaker
button next to the main switch and restart
the machine.

Tel: [phone] Tel: [phone]