User Manual
1.
General explanation of your walker
Your walker is equipped with various components and parts. Learn this before you
proceed with studying this manual. Designs and specifications may change without prior
notice.
2.
Safety precautions
Do not allow children to play with packaging without supervision. Risk of suffocation
for children!
Keep the product away from children, it is not a toy. Children may tip over and injure
themselves.
The walker should only be used for what has been developed and make sure that the
walker works well before use. All screws should be tightened.
Use the walker only on flat, smooth surface. Avoid sewers, grates or similar obstacles,
as the wheels could get trapped.
Make sure that the walker is used only by person who is familiar with the instructions
3.
Assembly and Adjustment
CAUTION!
Use the walker only it is fully assembled and in the deployed and locked position! Make
sure that the product is in perfect condition before use! Do not use the walker if it has
visible damage, or if there is a suspicion that it may be damaged
3.1 Assembly Remove the components and main frame in the front of you.
Main frame Footplates Knob screws Handles & Handle
Picture 1 Picture 2 Picture 3 Picture
1
Push handle
8
Front wheel
2
Brake lever
9
Backrest
3
Adjustable armrest
10
Seat
4
Knob screw for height
adjustable push handle
11
Brake cable
5
Rear frame
12
Shopping bag
6
sticks holder
13
Front frame
7
Rear wheel
14
Footplate
i. Hold the base frame and then lower the seat.
ii. Place the handle tube into the frame and set it to the proper height, and meanwhile
insert the knob screw and tighten it.
iii. The footplate can be installed in the front or at the back according to your
requirement.
iv. The step as follow is to show you how to install the shopping bag.
v. The step as follow is to show you how to fold the walker. Pull the seat vertically then
the walker will be folded.
vi. The armrest can be folded for easy carry.
3.2 Adjustment
Adjust the height of walker to a proper position which makes you comfortable and
convenient.
To adjust the height, loosen and remove knob screws on both side and then adjust the
handle tubes to the desired height. At the same time, insert the knob screw and
tighten it.
4.
Care and maintenance
Ensure that all attaching hardware is secure at all times.
Check the knob screws tightened or not. If not, tighten them necessary.
Replace any broken, damaged or worn parts immediately.
For dis-assembly of your walker, please follow the steps above in reverse order.
Loading...