VT-PIRC2/H
Color PIR Cameras
VITEK
VT-PIRC2
• Color CCD Image Sensor with 420 TV Lines (VT-PIRC2) /
550 TV Lines (VT-PIRC2/H)
• Minimum Illumination of 0.2 Lux / 0.5 Lux (VT-PIRC2/H)
• Pinhole 3.8mm / f2.0 Lens Included
• NC/C/NO Alarm Output
• Working 100’ Motion Detection Using 58 Beams Within 3
layers (35’ x 35’ Coverage Area)
PIR BOARD LAYOUT
1. LED: When an intrusion is detected, the LED will activate.
2. J2: Pulse count setting.
1-2 short (default): Relay will activate when an intrusion is detected once. (For stable
environments or high risk operating environments)
2-3 short: Relay will activate when an intrusion is detected twice within 15 seconds.
(For harsh environments)
3. J1: Relay output select.
Short: For outer control used in area where DC12V is requested (Limited at 200mA).
Normal: N.C. = DC12V out
Activate: N.O. = DC12V out
Caution! Risk of electric shock. Set-up and operation should be
performed by authorized service person only.
Open (default): Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at
AC240V)
Normal: C & N.C. short / C & N.O. open.
Activate: C & N.C. open / C & N.O. short.
4. VR1: Sensitivity adjustment.
Turn clockwise for low sensitivity, turn counter-clockwise for high.
5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
C: BLACK NO: WHITE NC: RED
7. J3: LED on/off
Open: LED off Short: LED on
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/500mA OUT (for CCD MODULE)
2
PIR SPECIFICATIONS
SPECIFICATIONS VT-PIRC2 VT-PIRC2/H
Image Device
Effective Pixels
Resolution
Minimum Illumination
PIR Detection Range
PIR Alarm Output
AGC
S/N Ratio
Video Output
Auto Electronic Shutter
Standard Pinhole Lens
Power Source
Power Consumption
Operation Temperature
Humidity
Dimensions (WxHxD)
1/4” Color CCD
510 x 492
420 TV Lines
0.2 Lux
100° / 35’ x 35’ Coverage Area
NC/N/NO
>18db
More Than 48dB
Composite: 1.0 Vp-p / 75 Ohm
1/60 to 1/100,000 sec.
3.8mm / F2.0
12VDC (300mA Regulated)
150mA
14°F ~ 140°F (-10°C ~ 60°C)
0-95%
2.75” x 4.72” x 1.69” / 70mm x 120mm x 43mm
1/3” Color CCD
811 x 508
550 TV Lines
0.5 Lux
**12VDC Regulated power adapter 12V must be used otherwise
the device will be damaged and un-repairable.
3
PIR DETECTION RANGE
1. Matching field of view for both the
PIR and CCTV cameras.
2. The PIR camera is a double duty
surveillance tool that combines the
detection capability of a professional
PIR with the viewing capability of a
security camera.
3. Easy-connect leads.
4. Fully adjustable, heavy-duty swivelmount bracket included.
5. The PIR camera is able to detect
human movement in a dark environment and still output the NC/NO
signal to turn on a light, other alarm
device or recording machine. Normal
cameras see nothing, so they do not
activate any devices in this situation.
4
PIR FEATURES
• Hidden
• Stable sensitivity
• Motion activated alarm output to control panel
• Lamp
• VCR
• Ability to change from a static to a dynamic state
• High quality and highly sensitive sensor
• Exceptional at detecting unexpected movements
• Uses Hi-Tech SMD technique
• Sensitivity and response time can be calibrated according to the
applications
• Guards have no need to watch the monitor day and night - The
PIR does the ‘watching’ on it’s own
5
VT-H Series
4, 8, and 16 Channel Digital Video
Recorders with H.264 Compression
The Alpha Series VT-H Series Digital Recorders
combine the latest H.264 Compression technology with stability and
simple operation. H.264 Compression is the next generation of MPEG4
allowing up to 50% smaller file sizes for increased storage capability
and/or resolution as well as a more fluid internet transmission speed.
VT-H Series DVRs can be controlled via supplied IR Remote control or
remote client.
• 4, 8, or 16 Video Inputs with 1 BNC & 1 VGA Output
• H.264 Compression
• Supports both Dynamic and Static IP Addresses
• Up to 120 IPS Recording / Live Display
• Remote Viewing over the Internet or LAN
• Supports one internal SATA Hard Drive
• 250GB to 1TB Internal Storage Options
• Quadplex operation enabling simultaneous recording,
playback, networking, and backup
6
H.264
VTM-LCDP Series
• 15”, 17“, and 19” Professional LCD Display Panels
• Designed for continuous 24/7 operation
• VGA, Looping BNC Composite, and S-Video Video
Inputs. DVI & HDMI Inputs on 17“ & 19” Versions
• Resolution up to 1280 X 1024 (17” & 19”)
• Stereo Audio Input/Output
• VESA Standard Mounting
7
LIMITED LIABILITY WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the
purchaser that products manufactured by VITEK are free of any rightful claim
of infringement or the like, and when used in the manner intended, will be free
of defects in materials and workmanship for a period of three (3) years, or
as otherwise stated above, from the date of purchase by the end user. This
warranty is non-transferable and extends only to the original buyer or end user
customer of a Vitek Authorized Reseller.
The product must have been used only for its intended purpose, and not been
subjected to damage by misuse, willful or accidental damage, caused by
excessive voltage or lightning.
The product must not have been tampered with in any way or the guarantee will
be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to products
sold or purchased through unauthorized sales channels. Warranty support is
available only if product is purchased through a VITEK Authorized Reseller.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
8
Loading...