Vitek VTM-LED220P, VTM-LED240P User Manual

22” & 24” Professional LED Monitor

w/HDMI, VGA, and Dual Looping BNC’s

VITEK

VTM-LED220P VTM-LED240P

• 22” / 24” Wide Screen LED Display Panel

• HDMI, VGA, and Dual Looping BNC Composite Video Inputs & Stereo Audio Input

• Resolution up to 1920 x 1080 (1080P)

• Contrast Ratio of 10,000:1

• <5ms Response time

• 170° Horizontal Viewing Angle

• Picture In Picture (PIP) / POP (Picture On Picture) Display Options

• Top Panel Controls with included IR Remote Control

• VESA 100mm Standard Mounting

• 50,000 Hour Panel Life

1DU00L7B-A.1

1

Introduction and Package Contents

Introduction

Congratulations on your VITEK LED Monitor purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring OSD controls and built in speakers, you will find this monitor both easy to use and a pleasure to view.

Please unpack your monitor with care, and verify that all the parts listed below are included. If any parts are missing, please contact your distributor immediately.

Please save the packing box for possible future return for service.

Package Contents

• LED Monitor – VTM-LED220P or VTM-LED240P

• 12 Volt DC Power Adapter / Power cord

• HDMI Cable

• D-Sub 15-pin VGA connector Cable

• User's Guide

• IR Remote Controller

Hardware Installation

The following sections in this guide give clear, step-by-step descriptions of the installation process and explain how to use the monitor for optimum results.

Please pay attention to the Regulations and Warnings Section of this user’s manual before setting up the display monitor. Failure to do so may inadvertently result in personal injuries or product damage.

1DU00L7B-A.1

2

Specifications

VTM-LED220P

VTM-LED240P

Screen Size

21.5”

23.6”

Display Type

LED

Aspect Ratio

16:9

Resolution

1080P (1920x1080)

Response Time

<5ms

Contrast Ratio

10,000:1

Display Color

16.7 Million

Brightness

300cd/m²

Pixel Type

Active Matrix TFT

Pixel Pitch

0.24825 x 0.24825 mm

0.2715 x 0.2715 mm

Viewing Angle (H/V)

170° / 160°

Video System

NTSC/PAL

Video In/Out

2 BNC Inputs / 2 BNC Outputs (Looping)

VGA In

1 (15Pin D-Sub)

HDMI In

1

Audio Input

Stereo RCA & 1/8" PC

Built In speaker

Yes (1.5W x 2 )

PIP / POP

Analog / Digital

Remote

Optional

3D Comb Filter

YES

3D De-Interlace

YES

Noise Reduction

YES

Multi-Language

English, Spanish, German, French, Italian, Russia, Turkish, Japanese, Polish

Stand Tilt

0°~15°

Vesa Mount Size

100mm x 100mm

Power Adapter

12VDC (AC100/240 [50/60])

Power Consumption

30W Max

35W Max

Certifications

UL, FCC-DOC, CE, ROHS

Operating Temperature

32° to 104° F (0° to 40° C)

Operating Humidity

10% to 90% relative, non-condensing

Dimensions (w/Stand)

20.63” x 14.76” x 6.7” (524 x 375 x 170mm)

22.83” x 16.02” x 6.7” (580 x 407 x 170mm)

Weight

7.93 lbs (3.6Kgs)

9.7 lbs (4.4Kgs)

1DU00L7B-A.1

3

VGA Timing

ITEM

RESOLUTION

H FREQ.(KHZ)

V FREQ.(HZ)

1

640x400@70

31.460

70.080

2

640x480@60

31.469

59.940

3

640x480@72

37.861

72.809

4

640x480@75

37.500

75.000

5

720x400@70

31.460

70.080

6

800x600@56

35.156

56.250

7

800x600@60

37.879

60.317

8

800x600@72

48.077

72.188

9

800x600@75

46.875

75.000

10

1024x768@60

48.363

60.004

11

1024x768@70

56.476

70.069

12

1024x768@75

60.023

75.029

13

1280x1024@60

63.981

60.020

14

1280x1024@75

79.976

75.025

15

1920x1080@60

67.500

60.000

Note:

1. Please note, selecting frequencies outside these ranges may result in an abnormal

Images.

2. The resolution will be showed on the screen while VGA mode be selected.

For example:

1DU00L7B-A.1

4

IN/OUT Panel Diagram/Descriptions:

1DU00L7B-A.1

5

2

Monitor and OSD Control

The VITEK VTM-LED220P and VTM-LED240P LED color monitors have a simple control layout for control and OSD (On Screen Display) functions. The table below summarizes the control keys and their related functions.

Key Feature

KEYS

FUNCTION DESCRIPTION

Power

Toggle the display between standby mode and on.

(Press “Power” and wait 6 sec., monitor will be activated for display )

Select

Switch mode ”AV1”, ”AV2”, “VGA”, “HDMI” - Toggle using +/-

Menu

Enter the main menu of the on-screen display (OSD).

Select

Select to Toggle between functions to be adjusted

+

Increase the value of the chosen function.

－

Decrease the value of the chosen function.

Vol +

Increase the value of volume.

Vol -

Decrease the value of volume.

Control Diagram/Descriptions