VITEK
VTM-LCD155P
15” Professional LCD Monitor with
VGA and Looping BNC
• 15” LCD Display Panel
• VGA and Looping BNC Composite Video Inputs & Stereo Audio Input
• Resolution up to 1024 x 768 (XGA)
• Contrast Ratio of 800:1
• <8ms Response time
• 170° Horizontal Viewing Angle
• Front Panel Controls
• VESA 75mm Standard Mounting
• 50,000 Hour Panel Life
1
1DU00L5B-A.2
1 Introduction and Package Contents
Introduction
Congratulations on VITEK LCD Monitor purchase. You can
expect only the sharpest and most brilliant color images from this
monitor. Featuring OSD controls and built in speakers, you will find
this monitor both easy to use and a pleasure to view.
Package Contents
• LCD Monitor – VTM-LCD155P
• 12Volt DC Power Adapter/Power cord
• D-Sub 15-pin VGA connector Cable
• User's Guide
Hardware Installation
The following sections in this guide give clear, step-by-step
descriptions of the installation process and explain how to use
the monitor for optimum results.
Please pay attention to the Regulations and Warnings Section of
this user’s manual before setting up the display monitor. Failure
to do so may inadvertently result in personal injuries or product
damage.
2
1DU00L5B-A.2
Specifications
VTM-LCD155P
Screen Size
15"
Display Type
LCD
Aspect Ratio
4:3
Resolution
XGA (1024x768)
Response Time
<8ms
Contrast Ratio
800:1
Display Color
16.7 Million
Brightness
250cd/m²
Pixel Type
Active Matrix TFT
Pixel Pitch
0.294(H) x 0.294(V)
Viewing Angle (H/V)
170° / 160°
Video System
NTSC/PAL
Video In/Out
1 BNC Input / 1 BNC Output
VGA In
1 (15Pin D-Sub)
Audio Input
Stereo RCA & 1/8" PC
Built In speaker
Yes (1.5W x 2 )
3D Comb Filter
YES
3D De-Interlace
YES
Noise Reduction
YES
Multi-Language
English, Spanish, German, French, Italian, Russia, Turkish, Japanese, Polish
Stand Tilt
-5°~15°
Vesa Mount Size
75mm x 75mm
Power Adapter
12VDC (AC100/240 [50/60])
Power Consumption
30W Max
Certifications
UL, FCC-DOC, CE, ROHS
Operating
Temperature
32° to 104° F (0° to 40° C)
Operating Humidity
10% to 90% relative, non-condensing
Dimensions (w/Stand)
13.82” x 13.43” x 6.5” (351 x 341 x 165mm)
3
1DU00L5B-A.2
VGA Timing
Item
Resolution
H Freq.(kHz)
V Freq.(Hz)
1
640x400@70
31.460
70.080
2
640x480@60
31.469
59.940
3
640x480@72
37.861
72.809
4
640x480@75
37.500
75.000
5
720x400@70
31.460
70.080
6
800x600@56
35.156
56.250
7
800x600@60
37.879
60.317
8
800x600@72
48.077
72.188
9
800x600@75
46.875
75.000
10
1024x768@60
48.363
60.004
11
1024x768@70
56.476
70.069
12
1024x768@75
60.023
75.029
Remark:
The timings with presetting are recommended.
Users have to adjust the timing manually, if it is not included in the presetting list
4
1DU00L5B-A.2
2 Monitor and OSD Control
The VITEK VTM-LCD155P LCD color monitor has a simple layout for
controlling the monitor and OSD (On Screen Display) functions. The
table below summarizes the control keys and their related functions.
Keys
Function Description
Toggle the display between standby mode and on.
(Press “Power” and waiting 6 sec., monitor will be activated for
display )
Automatically adjusts H-Position, V-Position, Pixel Clock
and Phase for an optimal image in PC mode only.
Switch function.
Increase the value of the chose item.
Switch function.
Decrease the value of the chose item.
Select mode “PC” or ”AV1.
Enter the main menu of the on-screen display (OSD).
LCD Status Display
The following table describes the various power states of the LCD
monitor as represented by varying LCD colors.
Power State
LCD Color
On
Green
Standby
Red
No power
Blank
5
1DU00L5B-A.2
3 OSD Control Function List
OSD Menu
Picture Mode
1. Picture Mode
Press -/ OR +/ to select the picture mode
“User, Standard, Movie, Vivid ”
2. Contrast
This is used to set the brightness of the screen.
Press -/ OR +/ to adjust the parameter.
3. Brightness
This is used to adjust the image contrast.
Press -/ OR +/ to adjust the parameter.
4. Tint
This is used to adjust the image Tint.
Press -/ OR +/ to adjust the parameter.
5. Saturation
This is used to adjust the image saturation.
Press -/ OR +/ to adjust the parameter.
6. Sharpness
Adjust the sharpness. It makes the image become soft.
Press -/ OR +/ to adjust the parameter.
7. Color Temp.
Press -/ OR +/ to adjust the color tones.
“ Cool , Warm , Normal “
Note: VGA Mode: Contrast, Brightness, Color Temp., Auto Adjust.
Sound Mode
1. Volume
Press -/ OR +/ to adjust volume level.
2. Mute
Press -/ OR +/ to select sound “ Off, On ”.
6
1DU00L5B-A.2
Setting Mode
AV Mode
VGA Mode
1. Language
Press -/ OR +/ to select language.
2. H. Position
Move the display picture left or right.
Press -/ OR +/ to adjust the parameter.
3. H Zoom
Adjust the H-size of the display picture
Press -/ OR +/ to adjust the parameter.
4. V Position
Move the display picture up or down.
Press -/ OR +/ to adjust the parameter.
5. V Zoom
Adjust the V-size of the display picture
Press -/ OR +/ to adjust the parameter.
6. Clock
Press -/ OR +/ to adjust the parameter.
7. Phase
Press -/ OR +/ to adjust the parameter.
8. Scale Mode
Adjust the V-size of the display picture
Press -/ OR +/ to adjust “ Full (4:3) or Wide (16:9).
9. Reset
Recall Default value.
Note: “ Clock” and “Phase ” setting only in VGA Mode
7
1DU00L5B-A.2
4 Caring for Your LCD Monitor
Caring for your LCD Monitor
Your VITEK LCD color monitor is a sensitive piece of electronic
equipment. Proper care can prevent accidentally damaging
the LCD panel or the monitor itself. By following these guidelines
you can ensure many years of trouble free use.
1. The LCD monitor's plastic casing and LCD glass panel can be
cleaned with a soft, lint-free cloth. Never use scrub pads or
other cleaning materials with abrasive surfaces to clean your
LCD monitor!
a. A slightly damp cloth or newspaper may be used to
clean the glass plate of fingerprints or smudges.
b. For the plastic case, a mild detergent may be used to
clean the surface. However, you should ensure not to
use too much detergent or water as this could leak into
the interior of the casing.
2. Do NOT use cleaning fluids based on alcohol, methylated
spirit, or ammonia. The glass plate has a hard surface coating
to prevent scratches. However, the use of strong chemical
cleaning agents may damage this coating. Use only a mild
soap or detergent and water or specially formulated cleaners
made for cleaning glass panels.
3. Avoid direct contact with water or other liquids. Never use
the LCD monitor in or around areas where water may pose a
potential hazard to normal operation.
4. Only use the LCD monitor indoors, and avoid monitor contact
with oil, vapor, steam, moisture and dust. The L CD
monitor should be used in a clean and low humidity
environment.
5. Keep the LCD monitor away from heaters or other heat
sources such as lighting equipment or direct sunlight.
6. Do not touch the screen of your LCD monitor with any sharp
object such as your fingernail or a pencil etc.
WARNING: Any unauthorized modification to this equipment
could result in the revocation of the authorization to operate the
equipment and void the product warranty.
8
1DU00L5B-A.2
5 Frequently Asked Questions
Power button does not respond
• Check the power cord to ensure that it is securely plugged
into the monitor base and also into the electrical outlet.
• Ensure there is electrical power coming from the AC outlet.
Use another device to check for power.
• Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
No image on the screen
• Ensure that the signal cable is properly connected
to the device generating the video signal such
as a DVR or Computer.
• If using VGA, check the DB-15 signal cable connector on
both ends for bent or pushed-in pins.
• If your signal generating device is a computer, the display
card should be properly seated in its card slot.
• Ensure that the computer or image signal generating device’s
power switch is ON.
• Ensure that the monitor's power switch is ON.
• Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
Power LCD is RED (with no image on the screen)
• Check the signal cable to ensure that it is properly
attached to the image generating device or graphics display
card.
• If using VGA, Check the DB-15 signal cable on both ends
for bent or pushed-in pins.
• Make sure the computer (or other device) is not in a
power-saving mode
(move the mouse or press a key on the
keyboard).
No sound coming from the audio speakers
• The audio cable should be connected to the lineout on the
audio card and the line-in on the monitor. Ensure that the
audio cable is properly connected.
• Inspect the audio cable for any apparent damage. Double
check by switching to another audio cable to see if the
audio works.
9
1DU00L5B-A.2
6 Regulations and Maintenance
FCC compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generation, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Precautions
＊ Read all of these instructions and save them for later use.
＊ Follow all warnings and instructions on the product.
＊ Product
- Do not cover or block the vent holes in the case.
- Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots.
They may cause accident fire, electric shock or failure.
- Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
- Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage potentials or other risks.
- Do not touch the screen directly with your fingers. You may damage the screen,
and oil from your skin is difficult to remove.
- Do not apply pressure to the screen. The LCD is very delicate and may crack.
＊ Power
- Use the type of power indicated on the rear panel label.
10
1DU00L5B-A.2
＊ Plugs
- Do not remove any of the prongs of the monitor’s three-pronged power plug.
- Disconnect the power plug from the AC outlet under following conditions:
◎ If you will not use it for an indefinite period time.
◎ When the power cord or plug is damaged or frayed.
◎ If the product does not operate normally when the operation instructions are
followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the
product to normal operation.
◎ If the product has been dropped or the cabinet has been damaged.
◎ If the product exhibits a distinct change in performance. May indicate a
need for
service.
＊ Power and extension cords
- Do not allow anything to rest on the power cord.
- Do not locate this product where persons will walk on the cord.
- Use the proper power cord with correct attachment plug type. If the power
source is 120 V AC, use a power cord that has UL and C-UL approvals. If the
power source is a 240 V AC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the respective European
country’s safety regulations, such as VDE for Germany.
- Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 10 amperes.
- Ensure that the total ampere rating of all units plugged into the extension cord is
not over the cord’s rating.
- If the power supply cord, which came with your monitor, is to be connected to
the PC instead of the wall outlet, this equipment is to be used with UL/TUV
approved computers with receptacle rated 100~240V AC, 50/60Hz,
2.0A(minimum).
＊ Environment
- Place the monitor on a flat, level surface.
- Place the monitor in a well-ventilated area.
- Keep the monitor away from:
Extremely hot, cold or humid places, direct sunlight, dusty surroundings and/or
equipment that may generate strong magnetic fields.
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. Digital recording and storage products are also warranted for 3 years except for the hard drives which carry their own independent factory warranty from the hard
drive manufacturer. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials
and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by
the end user. This warranty is non-transferable and extends only to the original buyer or end user customer of a
Vitek Authorized Reseller.
This warranty shall not apply to repairs or replacements necessitated by any cause beyond the control of VITEK,
including but not limited to, acts of nature, improper installation, excess moisture, misuse, lack of proper maintenance, accident, voltage fluctuations, or any unauthorized tampering, repairs or modifications. This warranty
becomes VOID in the event of alteration, defacement, or removal of serial numbers.
Within the first 6 months of purchase, VITEK will replace or credit any defective product at the request of the
customer (subject to availability) with a new product that equals or exceeds the performance of the original
product purchased.
Within the first 6 months of purchase, at its sole discretion, VITEK may issue an advance replacement for a defective product; however, all related costs including, but not limited to shipping and/or delivery charges will be
the responsibility of the customer. If upon return inspection a product is determined to be in good working order
or shows evidence of misuse, the customer will be responsible for full payment of the original product purchased
as well as the replacement product.
Beyond the first 6 month period for the remainder of the warranty, VITEK’S responsibility shall be limited to
repairing the defective product, including all necessary parts and related labor costs. At its sole discretion,
VITEK may choose to either exchange a defective product or issue a merchandise credit towards future product
purchases. Any replacement parts furnished in connection with this warranty shall be warranted for a period not
to exceed the remaining balance of the original equipment warranty.
A Return Authorization number or “RA” number must be obtained prior to the return of any item for repair, replacement, or credit. VITEK requires that this “RA” number be clearly printed on the outside of the shipping carton to avoid refusal of said shipment. The Return Authorization number expires after 30 days. Products returned
after the 30 day period will be subject to refusal. Shipping charges, if any, must be prepaid. A copy of the bill
of sale (or invoice of purchase), together with a complete written explanation of the problem must accompany
all returns.
Vitek makes no warranty or guarantee whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if product is purchased through a Vitek Authorized
Reseller.
VT-EHL
4 & 8 Channel H.264
Digital Video Recorders
Simplicity and reliability is the basis upon
which the EH L Digital Video Recorder
was conceived. With almost every
powerful feature of its predecessor the
“EH”, the EHL offers an economical
option for providing the most advanced
recording solution available. As part of
the EH family, the EHL is completely
compatible with all VITEK EH Platform
application software.
VT-EHL4 VT-EHL8
Video Input
IPS (Display / Recording)
Video Output
BNC Output
Audio In/Out
Storage
Archive
USB Port
System Control
Network
RJ-45 Ethernet Port
Playback Rate
PTZ
Point of Sale (POS)
Motion Area Setting
Recording Resolution Setting
Recording Quality Control
E-mail notification
System Configuration
Bandwidth limit
Two-Way Audio
Case Form Factor
4 Channels
120 / 120 (HD1)
120 fps @ 704x240
60 fps @ 704x480
• 4 or 8 Video Inputs with 1 Main, 1 Spot Monitor Output and 1 VGA output.
• Real Time Recording with Up to 120 IPS at HD1 Recording / Live Display (VT-EHL4)
/ 240 IPS at CIF (VT-EHL8)
• H.264 Compression
• Supports Static & Dynamic IP Addresses
• 4 Alarm & Audio Inputs / 1 Output
• 500GB to 2TB Internal Storage Options
• Remote Viewing over the Internet, LAN, Explorer, Safari, Firefox, Opera and Chrome
• Applications for iPhone, iPad, iTouch and Droid Devices
• “Quick Search” Function for automatic review
• Mac OSX Client & CMS Central Management Software Included
• Automatic sending of Health & Event notications via email
• Control locally via Front Panel, USB Mouse or with the Included IR Remote control
• PTZ Control over RS-485
240 / 240 (CIF)
VGA - 1 SXGA (1280 X1024)
Monitor: 1 Composite(BNC) / Spot: 1 Composite(BNC)
4 Line In (RCA) / 1 Line Out (RCA), CODEC : G.711 (64Kbps)
Up to 1 Internal HDD (SATA)
USB Device & Network
1 Front +1 Rear
Front Panel, USB Mouse, Included IR Remote Control
TCP/IP, HTTP, DHCP (DDNS)
10M/100M
240 fps @ 352x240
120 fps @ 704x240
60 fps @ 704x480
1 - RS-485 - Supports most of PTZ protocols with up to 255 Presets
N/A
Adjustable GRID(16X16), 10 Steps Sensitivity Level
By each camera for different resolution setting(CIF/2CIF/D1)
4 Levels (Low/Standard/High/Highest)
E-mails to specific users to notify events
Full setup configuration over network
YES: Adjustable by User
YES
1.3U
FEATURES:
8 Channels
Remote Viewing Apps for iPhone, iPad
& Android
Included VT-EH CMS Software allows
remote viewing and control of multiple
VT-EH Series DVR’s even when
located at multiple locations!
VT-EHL4 Rear Connections VT-EHL8 Rear Connections
Remote Viewing from anywhere using
Internet Explorer
Value unequalled...
The mosT adVanced FeaTures and FuncTions
aT a price poinT ThaT will amaze you!
A 620TVL Multi Purpose Wide Dynamic Color Dome Camera with a 3 Year
Warranty at a price that will shock even the savviest consumer.
The New VITEK Hercules Digital Processor provides features and
performance found only in cameras more than twice the cost. Built in
Wide Dynamic Range for challenging lighting demands, 3D Digital Noise
Reduction, Digital Slow Shutter, Motion Detection and Privacy Function are
just a start.
This Camera Lineup comes equipped with OSD, Secondary Video Output
and 3-Axis Positioning and is available in xed, 2.8-12mm Varifocal,
Infrared and Vandal/Weather Resistant versions making this camera an
Ultra Versatile choice.
FEATURES:
• 620TV Lines of Resolution
• 1/3” Sony Super HAD II CCD
DAY/ NIG HT
During The Day At Night
VITEK WDR
Alpha Domes Conventional Cameras
INFRARE D
IR LEDs Off Total Darkness w/IR LEDs
• Hercules DSP Engine
• Night Watch DSS Low Light Color Technology
• Fixed Lens, Varifocal, and IR Corrected Varifocal Lens Options
• Advanced OSD Functions: WDR, 3D DNR, DIS, Sens-up, Motion
Detection, and Privacy Masking
• Secondary Video Output with Cable Included
• 3-Axis Mount for Optimum Viewing Angle
• 35 IR LEDS with 120’ Range (Optional)
• IP68 Waterproof Rated (Outdoor Versions)
• Wall & Ceiling Mounts Available (Outdoor Versions)
• 12VDC/24VAC Dual Voltage / 12VDC (VTD-A4F/I) Operation
• Available in Ivory or Black
Versatile Mounting
Options For Indoor
& Vandal Resistant
Alpha Domes!
VT-AP/WMT
Indoor ALPHA Series
Wall Mount
VT-AV/WMT
Outdoor Heavy Duty
ALPHA Series Wall
Mount
VT-AV/CMT
Outdoor Heavy
Duty ALPHA Series
Ceiling Mount
28492 Constellation Road ValenCia, Ca 91355
WWW.ViteKCCtV.CoM | 888-ViteK-70
Loading...