Vitek VTD-TNMD4RFS Quick Start Guide

VTD-TNMD4RFS

Transcendent Series 4

Megapixel H.265 IP Dome

Camera with IR LED Illumination

QUICK START GUIDE

VITEK

FEATURES

1/3” 4.0 Megapixel Progressive Scan CMOS image sensor

• Up to 30fps live view @ 4 MegaPixel (2592x1520)

• 2.8mm or 3.6mm Fixed Iris Lens Options

• 10 Infrared LED’s with 35’ IR Range

• 120dB Super Wide Dynamic Range (WDR)

• True Mechanical Day/Night function by ICR

• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction

• Fully Programmable Intelligent Analytics including Object Removal/ Museum Search, Line Crossing, and Area Intrusion Detection

• H.265/H.264/MJPEG Triple Streaming

• Secondary Video Output (CVBS)

• Remote Viewing via CMS, Internet Explorer, and iOS & Android Apps

• ONVIF Compliant

• IP66 Weather Resistance & IK10 Impact Rating

• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are available online. Scan the QR Code or visit: http://www.vitekcctv.com/Downloads

Components and Accessories

Camera

Quick Guide

Screws

Overview

Hex Wrench

Drill Template

Waterproof Cap

RJ-45 Ethernet

CVBS Output

Audio Input

Power Input

Mounting Base

Capsule

2 3

Network Cable & Power Connections

First connect the Waterproof Cap to an Ethernet patch cable, then connect the cameras ethernet adaptor. If not powering the camera with PoE, also connect the power Cable to an approved 12VDC Power Supply.

Network Cable

12VDC

Optional 12VDC

Power Connection.

Not needed with PoE

Weather Resistant Network Coupler

1. Loosen the nut from the Weather Resistant Network Coupler,

2. Run ethernet cable through coupler, then attach a RJ-45 connector.

3. Tighten the nut and coupler for a weather resistant seal.

+ 5 hidden pages