Vitek VTD-TND3RFE, VTD-TND3RFE-2, VT-TND3CKTFE-2, VT-TND3CKTFE Quick Start Guide

VTD-TND3RFE

Megapixel Indoor/Outdoor WDR

IP Dome Camera with 24 IR LED

Transcendent Series 3

Illumination

QUICK START GUIDE

VITEK

VITEK

FEATURES

• 1/3” 3.0 Megapixel CMOS Image Sensor

• Up to 30fps live view @ 3 MegaPixel (2048x1536)

• 2.8mm or 3.6mm Fixed Iris Lens Options

• 24 Infrared LED’s with 70’ IR Range

• Digital Wide Dynamic Range (D-WDR)

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• On Board Motion Detection, Privacy Masking, and ROI

• H.264 & MJPEG Compression

• Remote Viewing via CMS, Internet Explorer, and iOS &
Android Apps

• ONVIF Compliant

• IP66 Weather Resistance & IK10 Impact Rating

• Optional Junction Box Mount Available (VT-TJB03)

• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads

Components and Accessories

Camera

Quick Guide

Screws

Hex Wrench

Overview

Drill Template

Rubber Plug

Waterproof Cap

1

2

RJ-45 Ethernet Power Cable1 2

2 3

Network Cable & Power Connections

First connect the Waterproof Cap to an Ethernet patch cable, then
connect the cameras ethernet adaptor. If not powering the camera with
PoE, also connect the power Cable to an approved 12VDC Power
Supply.

Network Cable

12VDC

Optional 12VDC

Power Connection.

Not needed with PoE

Weather Resistant Network Coupler

1. Loosen the nut from the Weather Resistant Network Coupler,

2. Run ethernet cable through coupler, then attach a RJ-45 connector.

3. Tighten the nut and coupler for a weather resistant seal.

3