Vitek VTD-MVS922DN-B, VTD-MVS922DN, VTD-MVS922WDR-B, VTD-MVS922WDR, VTD-MVS2810-L35-B User Manual

...

MIGHTY DOME

960H Cameras

750 TVL Dome Cameras Series

VITEK

• 1/3” 960H High Density Double Scan Sony CCD

• 750 TVL High Resolution

• WDR - Wide Dynamic Range (Selected Models)

• True Day/Night by ICR

• IR Corrected Lens Options Lens options: 2.8-10mm and 9-22mm

• XD-DNR (2D+3D DNR) Noise Reduction

• Polygon Masking with 15 Programmable Zones

• OSD (On Screen Display) for Camera Setup

• Flush or Surface mount with included adaptor

• Defog video enhancement processing

• Ultra Versatile Design with Infinity Ball Mount for Any Viewing Angle

• UTC CONTROL - Serial Control over Coax

• Secondary Video Output (Cable Included)

• Optional UTP Interface Available

• Fully Gasket Sealed with an IP-68 Water tight NEMA Rating (Vandal Resistant Versions)

• Optional Heater / Blower Options Available (Vandal Resistant Versions)

• Standard (-40°F) and Extreme Cold (-60°F) Temperature Kits Available (Vandal Resistant Versions)

• Available in Ivory or Black

• 12VDC / 24VAC Dual Voltage Operation

TABLE OF CONTENTS

BOX CONTENTS .......................................................................... 2

INCLUDED ACCESSORIES ......................................................... 2

AVAILABLE MODELS/ACCESSORIES ........................................ 3

MIGHTY DOME LAYOUT .............................................................. 4

INSTALLATION ............................................................................. 5

JUNCTION BOX INSTALLATION .................................................. 6

CONNECTIONS ........................................................................... 7

LENS ADJUSTMENT .................................................................... 8

3-AXIS GIMBAL ADJUSTMENT.................................................... 9

WDR MIGHTY DOME FEATURES ............................................... 10

OSD MENU STARTUP / MENU TABLE ........................................ 10

1. Scene Select ........................................................................ 13

2. Picture Adjustment ............................................................... 20

3. Electronic Zoom.................................................................... 21

4. Digital Image Stabilization (DIS) ........................................... 21

5. Privacy Mask ........................................................................ 22

6. Motion Detection................................................................... 23

7. System Setting ..................................................................... 24

8. Language.............................................................................. 26

9. Version ................................................................................. 26

10. Maintenance ....................................................................... 27

11. Exit ...................................................................................... 28

HEATER/BLOWER SPECIFICATIONS ......................................... 28

INDOOR WDR DOME SPECIFICATIONS .................................... 29

VANDAL WDR DOME SPECIFICATIONS .................................... 30

INDOOR DAY/NIGHT DOME SPECIFICATIONS ......................... 31

VANDAL DAY/NIGHT DOME SPECIFICATIONS .......................... 32

IR DOME SPECIFICATIONS ........................................................ 33

DIMENSIONS ................................................................................ 34

OTHER PRODUCTS FROM VITEK ............................................. 35

OTHER PRODUCTS FROM VITEK ............................................. 36

WARRANTY .................................................................................. 37

BOX CONTENTS

1) Mighty Dome Camera

2) Accessories

3) VT-MD-2VOC (Secondary Video Output Cable)

4) Instruction Manual & Mounting Template

INCLUDED ACCESSORIES

Torx Wrench - (Vandal & IR Versions Only)

Type #: T20 Length: 63mm / Diameter: 4mm Qty: 1

Phillips head Screws - (Vandal & IR Versions Only)

For attaching the dome cover to the flush housing. Type #: Phillips head M4x10 Length: 10mm / Diameter: 4mm Qty: 4

Self Tapping Screws

For attaching the surface mount housing or the the flush mount base to a solid surface. Type #: Phillips St4x30 Length: 30mm / Diameter: 4mm Qty:4

Self Tapping Screws - (Indoor Version Only)

For attaching the dome cover to the flush housing. Type #: Phillips St4x12 Length: 12mm / Diameter: 4mm Qty: 4

Anchors

If necessary, use to help secure the self tapping screws. Length: 30mm / Diameter: 7mm Qty: 4

Secondary Video Output Cable for Mighty Domes:

VT-MD-2VOC

For viewing video image during installation. Qty: 1

Mounting Template

Surface Mount

109.0

70.0

Mounting Template

Qty: 1

AVAILABLE MODELS / ACCESSORIES

Indoor MIghty doMe ConfIguratIons:

VTD-MS2810DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MS922DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/922mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC

VTD-MS1850DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/18-50mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS -12VDC/24VAC -Special Order (Call for Lead Time) (Available In Ivory or Black)

VTD-MS2810WDR: 960H - Indoor Effio-V Powered WDR Mighty Dome 750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MS922WDR: 960H - Indoor Effio-V Powered WDR Mighty Dome 750TVL Camera w/922mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

Vandal resIstant MIghty doMe ConfIguratIons:

VTD-MVS2810DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MVS922DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/9-22mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MVS1850DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/18-50mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC - Special Order (Call for Lead Time) (Available In Ivory or Black) VTD-MVS2810/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL

Camera w/2.8-10mm Lens, 35 IR LED’s, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC (Available In Ivory or Black) VTD-MVS922/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL

Camera w/9-22mm Lens, 35 IR LED’s, OSD, CR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MVS1850/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL Camera w/18-50mm Lens, 35 IR LED’s, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC - Special Order (Call for Lead Time) (Available In Ivory or Black) VTD-MVS2810WDR: 960H - Outdoor Vandal Proof Effio-V Powered WDR Mighty Dome

750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MVS922WDR: 960H - Outdoor Vandal Proof Effio-V Powered WDR Mighty Dome 750TVL Camera w/9-22mm Lens, OSD, /ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

optIonal Mounts & aCCessorIes:

1. VT-MD-HB24: Heater/Blower Kit (Vandal Resistant Models)

2. VT-MD-UTP: Unshielded Twisted Pair Transceiver Built-In

3. VT-MD/FMP: Flush Mount Plate for installation in drop ceilings or can be used as cover

plate when using 4-11/16 in. Square Boxes, 2-1/8 in. Deep - Welded with Conduit KO’s

4. VT-MD/PLMT: Mighty Dome Pole Mount Adapter - Requires VT-MD/WMT Wall Mount

5. VT-MD/CMT: Mighty Dome Ceiling/Pedestal Mount (Can be extended if necessary)

6. VT-MD/CNMT: Mighty Dome Corner Mount Adapter - Requires VT-MD/WMT Wall Mount

7. VT-MD/WMT: Mighty Dome Wall Mount (Available In Ivory or Black)

1. 2. 3. 4. 5. 6. 7.

MIGHTY DOME LAYOUT

1) Lens

2) Power Input Connector(12VDC /

24VAC)

3) Video Output Connector - BNC

4) Camera Holder and 2nd Video

output

5) Ball with the Camera Assembly

6) Safety Wire

7) Bubble

8) Dome Cover Ring

9) Flush Mount Base

10) Surface Mount Base

11) Assembly Screws - Torx M4x9

(Vandalproof)

12) Assembly Screws - Phillips ST4x12 (Indoor) / Phillips M4x10 (Vandalproof / IR)

13) Mounting Screws - Phillips ST4x30

INSTALLATION

1) Dome Cover

1.1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal proof screws and remove the dome cover.

1.2 Indoor Domes - Turn the dome cover to the left to remove the dome cover.

2) Flush Mount Installation:

Using four St4x30 screws, attach the flush mount base to a sturdy surface. Optional flush mount decorator plate. Model: VT-MD-FMP

3) Surface Mount Installation:

Drill pilot holes at the mounting location using the provided mounting template. Using four St4x30 screws, mount the surface mount housing to a sturdy surface. Using four ST4x12 (Indoor) screws or M4x10 (Vandal-proof) screws, attach the flush mount base to the surface mount housing.

JUNCTION BOX INSTALLATION

Mighty Domes can easily be flush or surface mounted to an electrical junction box (4-11/16 in. Square Boxes, 2-1/8 in. Deep - Welded with Conduit KO’s) using the pre-drilled mounting holes on either the surface mount housing or the the flush mount base.

Optional

ush mount

decorator plate

(VT-MD-FMP)

CONNECTIONS

• Power connection: 12VDC or 24VAC dual input.

• All Mighty Dome cameras come standard with a secondary video output. The

secondary video cable (VT-MD-2VOC) is included in the box.

VTM-LCD

LENS ADJUSTMENT

1) Loosen Zoom & Focus screws and make necessary adjustments as shown.

Field of view: Telephoto(T) to Wide(W) Focus: Near(N) to infinity( )

2) OSD Joystick Control

3-AXIS GIMBAL ADJUSTMENT

The Gimbal mechanism yields maximum rotation and placement as shown below.

Remove

MIGHTY DOME FEATURES

OSD menu Startup

Press the ‘OSD menu SET key’ down to access the setup menu mode.

• / : Selects previous page or next page.

• EXIT : Enters ‘EXIT’ menu.

• RETURN : Returns to the previous menu.

SETUP MENU

1 / 2

SCENE SELECT PICT ADJUST EZOOM DIS PRIVACY MASK MOTION DET SYS SETTING EXIT

FULL AUTO

OFF OFF

OFF

OSD menu Table

SETUP MENU

SCENE SELECT

ADVANCED MENU

FULL AUTO/ INDOOR/ OUTDOOR/ BACKLIGHT/ ITS/ CUSTOM

SHUTTER/AGC

WHITE BAL

HLC / BLC

AUTO

MANUAL

FIX

ATW

OFF

HLC

SETUP MENU

LANGUAGE VERSION MAINTENANCE

EXIT

CONFIGURATION

AE LEVEL

AGC MAX

SENS UP

SHUTTER

AGC MAX

SHUTTER

AGC MAX

SPEED

DELAY CNT

ATW FRAME

ENVIRONMENT

CLIP LEVEL

2 / 2

ENGLISH

1.01

100

42DB

OFF

1/50(1/60)

42DB

1/50(1/60)

42DB

127

200

INDOOR

OSD MENU FEATURES/SETUP

SCENE SELECT

PICT ADJUST

EZOOM

DIS

PRIVACY MASK

WDR / ATR-EX

DNR

DAY/NIGHT

IR OPTIMIZER

LENS SHD COMP

DEFOG

FLK LESS

ANTI CR

BRIGHTNESS

CONTRAST

SHARPNESS

HUE

COLOR GAIN

OFF

OFF / ON

AREA SEL

DISPLAY

POSITION

COLOR

WDR for V-Series, ATR-EX for A-Series

LEVEL

AUTO

OFF (default)

OFF

AUTO

AUTO / OFF / ON

120

128

MAG

PAN

TILT

1/15

OFF

BURST

CNTL SIGNAL

DELAY CNT

DAY->NIGHT

NIGHT->DAY

MODE

IR AREA

LEVEL

IR LED

COLOR NIGHT

PATTERN

POSH

POSV

LEVEL

MODE

512

256

OFF

EXT1

120

AUTO

---

DAY/NIGHT

ON/OFF

SET1/2/3

480

290

MID

GAIN CNTL

+ 26 hidden pages