Vitek VTC-HOCRAZ39, VTC-HOCRAZ933 User Manual
VITEK
FEATURES:
• 1/2.9” Sony® CMOS
• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)
• MegaPixel IR Corrected 3-9mm (VTC-HOCRAZ39) /9-22mm (VTC-HOCRAZ922)
Varifocal Lens
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by tracking
motion, then optically zooming in to that area of the frame
• Fully programmable advanced WDR
• Two (2) High Power 850nm IR LEDs with up to 80’ foot range
• Integrated Cooling Fan
• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic IR,
BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror, Flip
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on cable
characteristics and integrity)
• Heavy Duty IP68 rated weather/vandal resistant aluminum
construction
• 12VDC / 24VAC Dual Voltage Operation
VTC-HOCRAZ39/922
2.1MP HD-SDI Compact Indoor/Outdoor
WDR True Day/Night Dome Camera
2
Safety Precaution
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment . This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons .
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3
Safety Precaution
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
The camera should never be operated in water.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when installing the connection cable and observe that the
cable is not subjected to heavy leads, kinks or damage and no moisture can get in.
This can lead to damage to the camera and void the warranty.
Optional Dome Mounts to Suit any Application!
4
Contents
Safety Precaution
Contents
Features
Dimensions
Part Names
Installation Instructions
Operating Instructions
Specifications
p. 02 - 03
p. 04
p. 05 - 06
p. 02- 03
p. 07
p. 09
p. 09 - 11
p. 12 - 25
p. 26
Optional Dome Mounts
Package Includes
p. 28
Warranty
5
Features
¥ Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p)
¥ True WDR(Wide Dynamic Range)
¥ VTD-HOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens
(Optical 3x Auto focus zoom / Digital 32x zoom)
VTD-HOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens
(Optical 2.4x Auto focus zoom / Digital 32x zoom)
¥ Focusing Status Indicator on Screen
- ★(Blue) Focusing in process
- ★(White) Focusing Completed
¥ Smart Motion Zoom in combining with Pointing Zoom.
¥ Motion Detect, Privacy Mask, Defog, Sens-up(x32), BLC/HLC, HV Flip,
D-Zoom(1.1x~8x), LSC(Lens Shade Compensation), Motion Deblur
Pixel Compensation
¥ ID / TITLE / ZOOM RATIO DISPLAY
¥ Top performance at low light sensitivity (Sens-up On)
¥ OSD menu & Video sub-out for easy installation & maintenance.
¥ Circuit protection against faulty connection in power polarity
¥ Isolated power supply against ground loop problem
¥ Remote control via RS-485 (Pelco-D/P)
¥ 2 High power LEDs
¥ Flush / Surface mount selectable
¥ Hard Coated Polycarbonate Clear bubble dome
¥ Built-in 3-Axis Gimbal
¥ Built-in cooling Fan & Heating function
¥ IP68 / IK10 Protection
Key Features
M.A.P. - Motion Activated Pointing Zoom which enables the flexible zooming at any area.
Improved Noise reduction with the enhanced 3D-NR
Dual Filter Switching
Selectable Scale down image to 720p mode
Enhanced light Sensitivity by DSS technology
6
This camera realizes the natural and crisp image as you see the scene in front
of you by adopting Auto Focus Full HD(1920x1080p) camera module.
Features
General Description
Package Includes
Torque Wrench: 3mm (1pc)
Mounting Screw:
4 x 30mm (4pcs)
Plastic Anchor:
6 x 30mm (4pcs)
Mounting Template
HD-SDI Dome Camera
General Operation
Instructions
Complete Installation and
Operation Instructions on CD
Video Sub-Out Cable (1pc)
• With ICR mechanism,
- Enhances its sensitivity about 10x at night time
- Can Accept Infared light
• 24VAC/12VDC dual power design,
- Offers the flexibility of Installation
- Ensures the reliability
7
Dimensions
5.5
3.9
4.7
PCD 4.7
4.0
5.5
3-0.17
2.7
4.7
1.5
3.2
(unit: inches)
See Optional Dome Mounts
(pg. 3)
8
Part Names
BUBBLE DOME
3-AXIS GIMBAL
(Option)
(Option)
DOME COVER
SAFTY WIRE
FLUSH MOUNT
ZOOM LENS
SURFACE MOUNT
(Option)
OSD CONTROL
JOY STICK
POWER AND VIDEO CABLE
CONDUIT SPACER
CONDUIT HOLE CAP
9
Installation Instructions
Assembly Screw
(4x14mm)
Torque Wrench
Assembly Screw
(4x12mm)
Mounting Screw
(4x30mm)
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench
supplied.
4. Set the cameras viewing angle.
- Route the Power cable to the connecting place.
.
A
Flush mount type
A. Flush mount type:
B. Surface mount type (Option):
B
Surface mount type
3
5. Replace the dome cover to the dome base unit and tighten the assembly screws.
- Place the surface mount on pre-drilled position and attach using mounting
screws (4x30mm). Assemble the cable conduit, otherwise tighten a conduit hole
cap.
- Route the Power cable to the connecting place.
- Affix the dome base unit to the surface mount using the assembly screws
(4x14mm). Before attaching the dome base make sure the assembly holes are
aligned with the surface mount assembly holes.
See Optional Dome Mounts (pg. 3)
Flush Mount Installation
requires a Flush Mount
Decorator Plate (See
pg. 3)
See Optional Dome Mounts (pg. 3)
Assembly Screw
(4x14mm)
Torque Wrench
Assembly Screw
(4x12mm)
Mounting Screw
(4x30mm)
.
A
Flush mount type
B
Surface mount type
Flush Mount Installation
requires a Flush Mount
Decorator Plate
(See pg. 3)
Flush Mount
Decorator Plate
- Place the dome base unit on pre-drilled position and attach using mounting screws (4x30mm).
Loading...