Vitek VTC-EBV49-24 User Manual

LIMITED LIABILITY WARRANTY

Your new Camera is guaranteed to be free from defects in materials
and workmanship for a period of two years from the date of
purchase.

The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental
damage, caused by excessive voltage or lightning.

The product must not have been tampered with in any way then the
guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact an Authorized VITEK reseller for all servicing needs.

VTC-EBV49/24

1/3” Color Bullet Camera

with 540 TV Lines

VITEK

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM | 888-VITEK-70

4

• 1/3" CCD with 540TV Lines Resolution

• Built-in 4-9mm Varifocal Auto Iris lens

• Attractive and Compact Design

• Superior Backlight function

• Cable Feed-thru for Vandal Resistant Outdoor

Installation

• 24 Volt AC Operation

CAUTION

RISK OF ELECTRICAL SHOCK

1. Unit contains uninsulated dangerous voltage
within the enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.

2. Use a 24 VAC Power Supply.

. Read & Keep these instructions.

3

4. Heed to all warnings and follow all instructions
carefully.

5. Do not use near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. install in
accordance with the instructions.

8. Do not install near any heat source such as
radiators, heat resisters, stoves, or other
apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has to blades with one wider the other. A
grounding type plug has to blades and a third
grounding plug. The wide blade or the third
prong are provided for safety. if the provided
plug dose not fit into your into your outlet,
consult an electrician for replacement of the
obsolete outlet.

Installation

DO NOT OPEN

10. Protect the power cord from being walked on a
pinched particularly at plugs, convenience
receptacle, and the point where they exit from
the apparatus.

11. Only use attachment/accessories specified by

ITEK.

V

12. Use only with cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the Unit.

13. Unplug this unit during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel,
Servicing is required when the unit has been
damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the unit, the unit has
been exposed to rain or moisture, does not
operate normally or has been dropped.

15. Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personal.

CAUTION - To reduce the risk of electric shock, do
not perform any servicing other than contained in
these operating instructions unless you are qualified
to do so.

VTC-EVBV49/24

Image Pick-Up Device

TV System

Effective Pixels

Scanning System

Sync System

Resolution

Minimum Illumination

S/N Ratio

Gamma Characteristic

Video Output

Electronic Iris

Power Supply

Power Consumption

Lens (Included)

Operational Temp.

SPECIFICATIONS

1/3” Super HAD High Resolution Color CCD

NTSC

768H × 494V (380K pixels)

2:1 INTERLACE

Internal / Line Lock

540TV Lines

0.1 Lux

More Than 50dB

Internal / Line Lock selectable

Composite: 1.0 Vp-p / 75 Ohm

1/60 ~ 1/100,000sec

AC 24V

120mA

Varifocal 4mm-9mm

14 Deg. ~ 122 Deg F (-10 Deg -+ 50 Deg C)

1) Attach Shim to mounting surface
with the included Phillips Head
Screws then attach Camera to Shim
with the included Hex Head Screws.

2) Connect video to the BNC video
output and a AC 24V Power source
to the Power input.

3) Adjust Focus and Zoom with the
adjustment rings.

2

Dimension (W x H x D)

Weight

2.76" x 3.31" x 7.48" (70mm x 84mm x 190mm)

17.64 oz. (500g)

3