• 2000-8000 Degree K Automatic White Balance Tracking
• Max 1/100,000 Sec. Electronic Shutter
• Better Than 48dB S/N Ratio (VTC-C680 / VTC-C750) &
50dB (VTC-C680DN / VTC-C750DN)
• 12VDC / 24VAC Dual Voltage Operation
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
1. Unit contains uninsulated dangerous
voltage within the enclosure that may
be of sufficient magnitude to
constitute a risk of electric shock to
persons
2. Only use DC Power Supply
3. Read & Keep these instructions.
4. Heed to all warnings and follow all
instructions carefully.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. install in accordance with
the instructions.
8. Do not install near any heat source
such as radiators, heat resisters,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has to blades with
one wider the other. A grounding type
plug has to blades and a third
grounding plug. The wide blade or
the third prong are provided for
safety. if the provided plug dose not
fit into your into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on a pinched particularly at
plugs, convenience receptacle, and
the point where they exit from the
apparatus.
11. Only use attachment/accessories
specified by VITEK.
12. Use only with cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the Unit,
13. Unplug this unit during lightning
storms or when unused for long
periods of time.
14. Refer all servicing to qualified service
personnel, Servicing is required
when the unit has been damaged in
any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
unit, the unit has been exposed to
rain or moisture, does not operate
normally or has been dropped.
15. Do not attempt to service this
product yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personal.
CAUTION - To reduce the risk of electric
shock, do not perform any servicing
other than contained in these operating
instructions unless you are qualified to
do so.
• Please read these safety and operating instructions before putting the camera into
operation.
• Keep the operating instructions in a safe place for later use.
• The Standard Box Camera is designed for indoor use only and it must not be installed
where exposed to rain and moisture.
• The unit may only be opened by authorized personnel.
• Do not operate the cameras beyond their specified temperature, humidity or power
ratings.
• Pay attention when laying the connection cable and observe that the cable is not
subject to heavy loads, kinks, or damage and no moisture can get in.
• Power MUST be removed during installation.
• Do not attempt to disassemble the camera board from the camera.
• The warranty becomes void if repairs are undertaken by unauthorized persons.
• Contact the supplier if any functional problems arise.
CLEANING
• Do not use strong or abrasive detergents when cleaning this product.
• Use a dry cloth to clean the camera surface. In case the dirt is hard to remove, use a
mild detergent and wipe gently.
3
INTRODUCTION
VTC-C680 (VTC-C680DN for D&N) and VTC-C750 CCD Color Camera (VTCC750DN for D&N) are high performance standard box type color cameras that adopt
the most advanced 410,000 pixel 1/3” CCD. They are designed to have a conventional
camera appearance to act as a crime deterrent as well as remain unobtrusive when
installed. Its versatile design supports CS mount lens options allowing for various angles
according to the targeted installation environment. Their innovative LPF (Low Pass
Filter) and DSP technologies help represent natural colors. They are designed for indoor
use or outdoor use when installed in a weatherproof enclosure such as the
VITEK VT-EH10.
By utilizing a SONY CCD as well as a SONY HQ1 DSP, this camera provides
exceptionally sharp image quality up to 550TV Lines (for VTC-C750 & VTC-C750DN).
Through its backlight compensation function, it is able to give brighter and sharper
images of an object or objects darkened by background lighting or sunlight. Their highly
sensitive Super-HAD CCD also provides an auto white balance function, ensuring
accurate representation of colors under any lighting environment.
Either 24VAC or 12VDC (Non-Polarity) may be used with the use of a power adapter.