Vitek VTC-BHOCRAZ39, VTC-BHOCRAZ922 User Manual

VITEK

FEATURES:

• 1/2.9” Sony® CMOS

VTC-BHOCRAZ

2.1MP HD-SDI Vandal Resistant AFZ/WDR IR Bullet Camera

• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)

• Up to 30fps live view@ 1920x1080 (1080p)

• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZ39) / 9-22mm (VTCBHOCRAZ922) Varifocal Lens

• Mechanical IR Cut Filter (True Day/Night)

• 16:9 Video format

• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by tracking motion, then optically zooming into that area of the frame

• Fully programmable advanced WDR

• 40 850nm IR LEDs with up to 150’ IR range

• Integrated Cooling Fan

• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror, Flip

• 100% Pure Digital Transmission of video data

• Up to 700’ HD Transmission Range (Depending on cable characteristics and integrity)

• Heavy Duty IP68 rated weather/vandal resistant aluminum construction

• 12VDC / 24VAC Dual Voltage Operation

Safety Precaution

To prevent electrical shock and/or ﬁre hazard, use only speciﬁed power source.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons .

The symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Main power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera.

Avoid installing in areas where shock or vibration may occur.

Pay attention to safety when installing the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device no user serviceable parts The warranty becomes void if repairs are undertaken by unauthorized persons. Maintenance and repair have to be carried out only by authorized service centers. Use only a mild detergent to clean the housing. The camera should never be operated beyond the technical specifications. This can lead to damage to the camera and void the warranty. The camera should never be operated in water.

Contents

p. 02 - 03

Safety Precaution

Optional Dome Mounts

p. 04

Contents

p. 05 - 06

Features

p. 06

Package Includes

p. 07

Dimensions

p. 08

Part Names

p. 09 - 11

Installation Instructions

p. 12 - 25

Operating Instructions

p. 26

Specifications

p. 29

Warranty

Features

Key Features

• Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p)

• True WDR(Wide Dynamic Range)

• Improved Noise reduction with the enhanced 3D-NR

• VTC-BHOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens

(Optical 3x Auto focus zoom / Digital 32x zoom)

• VTC-BHOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens

(Optical 2.4x Auto focus zoom / Digital 32x zoom)

• Focusig Status Indicator on Screen

- ★(Blue) Focusing in process

- ★(White) Focusing Completed

• Dual Filter Switching

• Pointing Zoom which enables the exible zooming at any area.

• Smart Motion Zoom in combining with Pointing Zoom.

• Selectable Scale down image to 720p mode

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,

H/V/HV Flip, D-Zoom(1.1x~8x), LSC(Lens Shade Compensation),

Motion Deblur, Pixel Defect Compensation

• ID / TITLE / ZOOM RATIO DISPLAY

• Enhanced light Sensitivity by DSS technology

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & Video sub-out for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

• Built-in 40 LEDs

• One-touch 3-Axis locking bracket, Easy installation Pad

• Built-in cooling Fan & Heating function

• IP68 protection

Features

General Description

This camera realizes the natural and crisp image as you see the scene in front

of you by adopting Auto Focus Full HD(1920x1080p) camera module.

• With ICR mechanism

- Enhances its sensitivity about 10x at night time

- Can accept infrared light

• 24VAC/12VDC dual power

- Offers the exibility of installation

- Ensures the reliability

Package Includes

VTC-BHOCRAZ Camera

Plastic Anchor:

6 x 30mm (4pcs)

Mounting Screw:

4 x 30mm (4pcs)

Assembly Screw:

4 x 14mm (4pcs)

Torque Wrench:

3mm (1pc)

General Operation

Instructions

Mounting Template

Easy Bracket

Video Sub-out Cable (1pc)

Complete Installation and

Operation Instructions on CD

Dimensions

(unit: inches)

3.31

3.53

3.15

3.39

4.35

10.11

3.94

4.37

Part Names

SUNSHIELD BOLT

SUNSHIELD

DUAL WINDOW

POWER AND VIDEO CABLE

FRONT CASE

CAUTION

• Extreme care should be taken NOT to scratch the

window in front of lens while installing or adjusting the camera.

• Care should be taken the cable is NOT damaged,

kinked or exposed in a hazardous area.

• Do not expose the camera lens directly to a strong

light source such as the sun or a spot light.

REAR CASE

OSD Setup

CONTROL COVER

BRACKET

Torque wrench

• Adjustment of viewing angle with one-touch 3-Axis bracket

Lock/Unlock Screw

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling or wall if needed. (*The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and attach using mounting screws(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Attach the camera bracket using the assembly screws (4x14mm).

5. Set the camera’s viewing angle.

6. Attach the sunshield to the camera unit and tighten the sunshield-bolt.

Plastic Anchor

: 6x30mm

Mounting Screw

: 4x30mm

Assembly Screw

Torque Wrench

: 4x14mm

REAR VIEW

Cable exit

+ 21 hidden pages