VITEK
VTC-BHOCR2812
2.1MP HD-SDI Vandal Resistant WDR
Bullet Camera with 2.8-12mm & 70 IR LEDs
New &
Improved
Mount for
Ease of
Installation
FEATURES:
• 1/2.9” Sony CMOS
• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)
• 70 850nm Dynamic Intensity IR LEDs with 200’ Range
• MegaPixel IR Corrected 2.8-12mm Varifocal Lens Included
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• Advanced OSD Functions: WDR, 3D-DNR, Night Watch DSS Low Light
Color Technology, ACE (Adaptive Color Enhancement), Motion Detection,
Privacy, Digital Zoom, HLM, Flip, Mirror
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on
cable characteristics and integrity)
External
Adjustments
for Zoom,
Focus and
OSD
• 12VDC / 24VAC Dual Voltage Operation
1. Depress the joystick to enter the setup menu
•
The Setup menu is now displayed on the monitor
Zoom, Focus, and OSD controls are located on the back of the camera.
The OSD control joystick can be accessed by
turning the cover counter-clockwise.
IMAGE SCALE
IMAGE FORMAT
2
Zoom, Focus, and OSD controls are located on the back of the camera.
The OSD control joystick can be accessed by
turning the cover counter-clockwise.
1. Depress the joystick to enter the setup menu
The Setup menu is now displayed on the monitor
•
3
MENU
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
the type of the lens can be set to either DC or Manual.
(PAL / NTSC)
Decrease Level
Increase Level
Select any function you
wish to change by
pushing the joystick Up
or Down
3. When finished programing camera select EXIT to save values.
MENU
Modes can be changed
by pushing the joystick
Left or Right.
4
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
Decrease Level
the type of the lens can be set to either DC or Manual.
(PAL / NTSC)
Increase Level
5
Set from 0-10 (set to high and color will fade)
Turns Mirror / Flip On or Off.
Adjustable digital zoom from 0~127x.
32
MENU
so that the arrow indicates White Bal.
joystick.
When Halogen or other specialty lighting is used.
by using the joystick up or down
Increase or Decrease Level.
Increase or Decrease Level.
Increase or Decrease Level.
6
MENU
Set from 0-10 (set to high and color will fade)
Turns Mirror / Flip On or Off.
Adjustable digital zoom from 0~127x.
7
32
to prevent bright lights from washing out the picture i.e.
headlights
Increase or decrease the level of HLM
8
The Wide Dynamic Range feature improves the overall picture balance beyond the
Backlight Compensation feature. It creates an optimal balance of brightness and color by
combining images from a bright area (high shutter speed) and images from a dark area
(low shutter speed).
9
•
MENU
MENU
Reduces noise level in low light conditions.
MENU
MENU
MIDDLE
10
MENU
MENU
11
IMAGE SCALE
IMAGE FORMAT-
Set output frame to 25 or 30 (PAL/NTSC). (Can be set to 50 or 60 at 720P mode)
MENU
IMAGE SCALE
IMAGE FORMAT
IMAGE SCALE
IMAGE FORMAT
To help Compensate for dead pixels
12
IMAGE SCALE
IMAGE FORMAT
(In this mode the OSD might flicker)
Adjust the focus while in zoom mode to better focus the camera
Factory Default
13
4.02”
7.17”
9.88”
4.06”
5.51”
HDMI
HD-SDI DVR
14
SPECIFICATIONS
Sensor
Resolution
S/N
Video Output
IR Illuminators
IR Color Temp.
IR Range
Dynamic Intensity IR LEDs
Lens
Minimum Illumination
Day/Night
Electronic shutter speed
White Balance
Brightness
DSS (Sens-Up)
DNR
WDR
OSD Language
Digital Zoom
Privacy
Motion Detection
ACE (Adaptive Color Enhancement)
Advanced OSD Functions
Communication
HD Transmission Range
Weather Resistance Rating
Operating Conditions
Input Voltage
Power Consumption (12VDC)
Power Consumption (24VAC)
Dimensions
1/2.9” Sony CMOS (IMX122LQJ)
2.1 MegaPixel (1080p / 720p)
More than 52 dB (AGC Off)
1x HD-SDI (BNC) / 1x SD CVBS (BNC)
70 IR LEDs
850nm
200’
YES
MegaPixel IR Corrected 2.8-12mm Varifocal
1 Lux at F1.2 / 0.1 Lux (B/W) / 0 Lux at IR On
Mechanical IR Cut Filter (True Day/Night)
Auto / Manual (1/30sec ~ 1/30,000sec)
Auto / Auto EXT / Pushing / Manual
Adjustable (0 ~ 20 Steps)
OFF / X2 / X3 / X4
3D-DNR
YES
English
0 ~ x127
YES (32 Zones)
YES
YES
HLM, Flip, Freeze, Sharpness, Mirror
RS-485 (PELCO-D)
Up to 700’ (Depending on cable characteristics and integrity)
IP-68
14°-122°F (-10°-50°C) < 80% RH
12VDC / 24VAC (Dual Voltage)
250mA / 1.5 Amps (IR OFF/ON)
125mA / 500mA (IR OFF/ON)
4.06” x 6.30” x 9.13” (W x H x D)
Sony® and PELCO® are the registered trademarks of their independently owned and operated companies. These products have not been licensed
or endorsed by the manufacturers of Sony® and PELCO® products.
15
OTHER PRODUCTS FROM VITEK
On Cue HD-SDI Video Recorders
VT-HDOC Series
On Cue Series 4, 8, & 16 Channel HD-SDI Video Recorders
• 4, 8, or 16 Channel HD-SDI Inputs (Universal) with Full1080p, 720P, 960H & D1 Camera Support
• Simple plug and play, point-to-point connection from camera to DVR
• Pentaplex Operation (Multi-Channel Live-View, Playback, Recording, Backup, Network)
• VT-HDOC16: 480fps Live Display, Recording & Playback at 720p/1080p
• VT-HDOC8: 240fps Live Display, Recording & Playback at 720p/1080p
• VT-HDOC4: 120fps Live Display, Recording & Playback at 720p/1080p
• HDMI, VGA, and BNC Spot Output / Alarm In & Out / 4 Channel Audio In
• VT-HDOC 4 & 8 offer 2 Internal SATA2/SATA3 HDD Slots supporting up to 8TB (2 x 4TB HDD) using
Advanced HDD Format (VT-HDOC16 Offers 5x SATA Slots for up to 20TB Internal Storage)
• External SATA Port (eSATA) supporting up to 5x External HDDs
• Remote Viewing via CVS Software, Web Browser, and Mobile Phones (iOS/Android)
• Viewing multiple Recorders with included CVS Software
• Adjustable Motion Detection Grid
• Thumbnail / Panorama Search
16
LIMITED LIABILITY WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that
products manufactured by VITEK are free of any rightful claim of infringement or the like, and
when used in the manner intended, will be free of defects in materials and workmanship for
a period of three (3) years, or as otherwise stated above, from the date of purchase by the
end user. This warranty is nontransferable and extends only to the original buyer or end user
customer of a VITEK Authorized Reseller.
The product must have been used only for its intended purpose, and not been subjected to
damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the guarantee will be
considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to products sold or
purchased through unauthorized sales channels. Warranty support is available only if product
is purchased through a VITEK Authorized Reseller.
Version 1.4 (3700-8537D)
June 2014
Loading...