Vitek S2003, VT1208 Instruction manual

STEAM IRON

Model S2003 / VT1208

Instruction for use

IMPORTANT SAFEGUARDS

*When using electrical appliances, basic safety precautions should

always be followed:-

*Read carefully and save all the instructions provided with an

appliance.

*Use iron only for its intended use.

*To protect against a risk of electric shock, do not immerse the iron

in water or other liquids.

*The iron should always be turned to minimum before plugging or

unplugging from outlet. Never pull cord to disconnect from electrical
outlet; instead, grasp plug and pull to disconnect.

*Do not allow cord to touch hot surfaces. Allow the iron to cool

completely then store in the upright position on its heel.

*The cord can be wrapped around the stowage facility at the rear

of the iron.

*Do not touch hot surfaces. High temperatures are generated

during use which could cause burns. Always use the handle and
warn others (especially children) of the possible dangers of burns
from steam, hot water or the soleplate, especially when ironing
vertically.

*Always disconnect iron from electrical outlet when not in use.

*If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.

BEFORE USING FOR THE FIRST TIME

Please read these instructions carefully before using the iron.
* Remove any sticker or protective cover from the solepalte before

using the iron.

* Use for the first time on an old piece of fabric to ensure the

soleplate and water tank are completely clean.

* When first used some vapour may be emitted, after a short while,

however, this will cease.

SETTING THE TEMPERATURE

First sort items to be ironed, according to the International Textile
Care Labelling Code. Iron fabrics requiring the coolest temperatures
first. Work gradually to be higher temperatures. Both the
temperature dial and most items of laundry have markings
corresponding with this code.

For household use only.

IM S2000-2002/3

1 2 4

*Check the cord periodically for possible damaged.

*Store the unit out of reach of children.

*Do not allow the power cord to hang down over edges where it can

be reached by children.

*Unplug the appliance from the mains supply:

-before filling with water or emptying it,

-before cleaning and maintenance,

-immediately after use.

*Never iron or dampen cloths while wearing them.

*Close supervision is necessary for any appliance being used near

children. Do not leave iron unattended while connected or on an
ironing board.

*Do not use outdoors or in bathrooms.

SAVE THESE INSTRUCTIONS

STEAM

(MAX
STEAM)

TableA.

KNOW YOUR STEAM IRON

1. Steam Selector
knob

- Select from 6

steam settings. Plus

DRY

for dry ironing.

1.

9. Water Filling Inlet
Cover to prevent lint

from entering water
tank and stops water
spilling from the iron.

MAX

2a. & 2b. Removable Steam Valve - The steam
valve is connected to the Steam Selector knob,
and is easily removed for cleaning and prevention
of scale build up that can affect its performance.

2a.

2b.

8.

8. Temperature Dial.

Temperature selection from minimum
(synthetics) through to maximum (linen).

3. Spray Button

is conveniently
positioned for a fine
mist spray.

3.

4. Surge of Steam
Button foranextra

burst of steam.

4.

4. Vertical Surge of Steam - Pressing the Surge of Steam button with
the iron in an upright position produces a vertical surge of steam,
which is ideal for steaming curtains and suits, and removing creases
from delicate fabrics.

4.

5. Power Cord

with cord clip for
neat storage.

6. Heating Indicator Light .

9.

10. Spray Nozzle.

10.

11. Soleplate with full length button groove.
Stainless Steel Soleplate
Non-stick Soleplate
Polished Aluminium Soleplate

- Model S2003 & S2013

- Model S2002

- Model S2001

12. Maximum
Water Level Line.

7.

MAX

7. Cord Wrap Facility.

14.

13. Large 230ml

14. Dial Indicator.

Water Tank.

15. Water
Fill Beaker.

3