Vitek VTD-MS1850DN, VTD-MVS2810DN, VTD-MS922DN, VTD-MS922WDR, VTD-MVS922DN User Manual

VITEK

MIGHTY DOME

960H Cameras

750 TVL Dome Cameras Series

• 1/3” 960H High Density Double Scan Sony CCD

• 750 TVL High Resolution

• WDR - Wide Dynamic Range (Selected Models)

• True Day/Night by ICR

• IR Corrected Lens Options Lens options: 2.8-10mm and
9-22mm

• XD-DNR (2D+3D DNR) Noise Reduction

• Polygon Masking with 15 Programmable Zones

• OSD (On Screen Display) for Camera Setup

• Flush or Surface mount with included adaptor

• Defog video enhancement processing

• Ultra Versatile Design with Infinity Ball Mount for Any
Viewing Angle

• UTC CONTROL - Serial Control over Coax

• Secondary Video Output (Cable Included)

• Optional UTP Interface Available

• Fully Gasket Sealed with an IP-68 Water tight NEMA Rating
(Vandal Resistant Versions)

• Optional Heater / Blower Options Available (Vandal
Resistant Versions)

• Standard (-40°F) and Extreme Cold (-60°F) Temperature
Kits Available (Vandal Resistant Versions)

• Available in Ivory or Black

• 12VDC / 24VAC Dual Voltage Operation

1

TABLE OF CONTENTS

BOX CONTENTS .......................................................................... 2

INCLUDED ACCESSORIES ......................................................... 2

AVAILABLE MODELS/ACCESSORIES ........................................ 3

MIGHTY DOME LAYOUT .............................................................. 4

INSTALLATION ............................................................................. 5

JUNCTION BOX INSTALLATION .................................................. 6

CONNECTIONS ........................................................................... 7

LENS ADJUSTMENT .................................................................... 8

3-AXIS GIMBAL ADJUSTMENT.................................................... 9

WDR MIGHTY DOME FEATURES ............................................... 10

OSD MENU STARTUP / MENU TABLE ........................................ 10

1. Scene Select ........................................................................ 13

2. Picture Adjustment ............................................................... 20

3. Electronic Zoom.................................................................... 21

4. Digital Image Stabilization (DIS) ........................................... 21

5. Privacy Mask ........................................................................ 22

6. Motion Detection................................................................... 23

7. System Setting ..................................................................... 24

8. Language.............................................................................. 26

9. Version ................................................................................. 26

10. Maintenance ....................................................................... 27

11. Exit ...................................................................................... 28

HEATER/BLOWER SPECIFICATIONS ......................................... 28

INDOOR WDR DOME SPECIFICATIONS .................................... 29

VANDAL WDR DOME SPECIFICATIONS .................................... 30

INDOOR DAY/NIGHT DOME SPECIFICATIONS ......................... 31

VANDAL DAY/NIGHT DOME SPECIFICATIONS .......................... 32

IR DOME SPECIFICATIONS ........................................................ 33

DIMENSIONS ................................................................................ 34

OTHER PRODUCTS FROM VITEK ............................................. 35

OTHER PRODUCTS FROM VITEK ............................................. 36

WARRANTY .................................................................................. 37

2

BOX CONTENTS

INCLUDED ACCESSORIES

1) Mighty Dome Camera

2) Accessories

3) VT-MD-2VOC (Secondary Video Output Cable)

4) Instruction Manual & Mounting Template

Torx Wrench - (Vandal & IR Versions Only)

Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1

Phillips head Screws - (Vandal & IR Versions Only)

For attaching the dome cover to the flush housing.
Type #: Phillips head M4x10
Length: 10mm / Diameter: 4mm
Qty: 4

Self Tapping Screws

For attaching the surface mount housing or the the flush
mount base
to a solid surface.
Type #: Phillips St4x30
Length: 30mm / Diameter: 4mm
Qty:4

Self Tapping Screws - (Indoor Version Only)

For attaching the dome cover to the flush housing.
Type #: Phillips St4x12
Length: 12mm / Diameter: 4mm
Qty: 4

Anchors

If necessary, use to help secure the self tapping screws.
Length: 30mm / Diameter: 7mm
Qty: 4

Secondary Video Output Cable for Mighty Domes:

VT-MD-2VOC

For viewing video image during installation.
Qty: 1

Mounting Template

Qty: 1

Mounting Template

Surface Mount

109.0

70.0

3

AVAILABLE MODELS / ACCESSORIES

Indoor MIghty doMe ConfIguratIons:

VTD-MS2810DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera
w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MS922DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/9­22mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC

VTD-MS1850DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera
w/18-50mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS -12VDC/24VAC -Special
Order (Call for Lead Time) (Available In Ivory or Black)

VTD-MS2810WDR: 960H - Indoor Effio-V Powered WDR Mighty Dome 750TVL Camera
w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

VTD-MS922WDR: 960H - Indoor Effio-V Powered WDR Mighty Dome 750TVL Camera w/9­22mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black)

Vandal resIstant MIghty doMe ConfIguratIons:

VTD-MVS2810DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty Dome
750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or
Black)

VTD-MVS922DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty Dome
750TVL Camera w/9-22mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or
Black)

VTD-MVS1850DN: 960H - Outdoor Vandal Proof Effio-A Powered Day/Night Mighty
Dome 750TVL Camera w/18-50mm Lens, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC - Special Order (Call for Lead Time) (Available In Ivory or Black)
VTD-MVS2810/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL

Camera w/2.8-10mm Lens, 35 IR LED’s, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC (Available In Ivory or Black)
VTD-MVS922/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL

Camera w/9-22mm Lens, 35 IR LED’s, OSD, CR and “Night Watch” DSS -12VDC/24VAC (Ivory
or Black)

VTD-MVS1850/L35: 960H - Outdoor Vandal Proof Effio-A Powered IR Mighty Dome 750TVL
Camera w/18-50mm Lens, 35 IR LED’s, OSD, Day Night w/ICR and “Night Watch” DSS

-12VDC/24VAC - Special Order (Call for Lead Time) (Available In Ivory or Black)
VTD-MVS2810WDR: 960H - Outdoor Vandal Proof Effio-V Powered WDR Mighty Dome

750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or
Black)

VTD-MVS922WDR: 960H - Outdoor Vandal Proof Effio-V Powered WDR Mighty Dome
750TVL Camera w/9-22mm Lens, OSD, /ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or
Black)

optIonal Mounts & aCCessorIes:

1. VT-MD-HB24: Heater/Blower Kit (Vandal Resistant Models)

2. VT-MD-UTP: Unshielded Twisted Pair Transceiver Built-In

3. VT-MD/FMP: Flush Mount Plate for installation in drop ceilings or can be used as cover

plate when using 4-11/16 in. Square Boxes, 2-1/8 in. Deep - Welded with Conduit KO’s

4. VT-MD/PLMT: Mighty Dome Pole Mount Adapter - Requires VT-MD/WMT Wall Mount

5. VT-MD/CMT: Mighty Dome Ceiling/Pedestal Mount (Can be extended if necessary)

6. VT-MD/CNMT: Mighty Dome Corner Mount Adapter - Requires VT-MD/WMT Wall Mount

7. VT-MD/WMT: Mighty Dome Wall Mount (Available In Ivory or Black)

1. 2. 3. 4. 5. 6. 7.

4

MIGHTY DOME LAYOUT

1) Lens

2) Power Input Connector(12VDC /

24VAC)

3) Video Output Connector - BNC

4) Camera Holder and 2nd Video

output

5) Ball with the Camera Assembly

6) Safety Wire

7) Bubble

8) Dome Cover Ring

9) Flush Mount Base

10) Surface Mount Base

11) Assembly Screws - Torx M4x9

(Vandalproof)

12) Assembly Screws - Phillips
ST4x12 (Indoor) / Phillips M4x10
(Vandalproof / IR)

13) Mounting Screws - Phillips
ST4x30

5

INSTALLATION

1) Dome Cover

1.1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal
proof screws and remove the dome cover.

1.2 Indoor Domes - Turn the dome cover to the left to remove the dome cover.

2) Flush Mount Installation:

Using four St4x30 screws, attach the flush mount base to a sturdy surface.
Optional flush mount decorator plate. Model: VT-MD-FMP

3) Surface Mount Installation:

Drill pilot holes at the mounting location using the provided mounting template.
Using four St4x30 screws, mount the surface mount housing to a sturdy
surface. Using four ST4x12 (Indoor) screws or M4x10 (Vandal-proof) screws,
attach the flush mount base to the surface mount housing.

6

JUNCTION BOX INSTALLATION

Mighty Domes can easily be flush or surface mounted to an electrical junction box
(4-11/16 in. Square Boxes, 2-1/8 in. Deep - Welded with Conduit KO’s) using the
pre-drilled mounting holes on either the surface mount housing or the the flush
mount base.

Optional

ush mount

decorator plate

(VT-MD-FMP)

7

CONNECTIONS

• Power connection: 12VDC or 24VAC dual input.

• All Mighty Dome cameras come standard with a secondary video output. The

secondary video cable (VT-MD-2VOC) is included in the box.

VTM-LCD

8

LENS ADJUSTMENT

1) Loosen Zoom & Focus screws and make necessary adjustments as shown.

Field of view: Telephoto(T) to Wide(W)
Focus: Near(N) to infinity( )

2) OSD Joystick Control

9

3-AXIS GIMBAL ADJUSTMENT

The Gimbal mechanism yields maximum rotation and placement as shown below.

Remove

10

MIGHTY DOME FEATURES

OSD menu Startup

OSD menu Table

SETUP MENU

ADVANCED MENU

CONFIGURATION

SCENE SELECT

FULL AUTO/ INDOOR/ OUTDOOR/ BACKLIGHT/ ITS/ CUSTOM

SHUTTER/AGC

100

42DB

OFF

1/50(1/60)

42DB

1/50(1/60)

42DB

127

30

200

INDOOR

10

AE LEVEL

AUTO

AGC MAX

AGC MAX

SENS UP

MANUAL

FIX

ATW

OFF

HLC

WHITE BAL

HLC / BLC

SHUTTER

AGC MAX

SHUTTER

SPEED

DELAY CNT

ATW FRAME

ENVIRONMENT

CLIP LEVEL

• / : Selects previous page or next page.

• EXIT : Enters ‘EXIT’ menu.

• RETURN : Returns to the previous menu.

Press the ‘OSD menu SET key’ down to access the setup menu mode.

SETUP MENU

1 / 2

SCENE SELECT
PICT ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYS SETTING

OFF
OFF

OFF

EXIT

FULL AUTO

SETUP MENU

2 / 2

LANGUAGE
VERSION
MAINTENANCE

EXIT

ENGLISH

1.01

11

OSD MENU FEATURES/SETUP

OFF

EXT1

3

80

120

AUTO

---

3

DAY/NIGHT

ON/OFF

SET1/2/3

480

290

MID

PICT ADJUST

EZOOM

DIS

IR OPTIMIZER

LENS SHD COMP

DEFOG

FLK LESS

ANTI CR

BRIGHTNESS

CONTRAST

SHARPNESS

HUE

COLOR GAIN

OFF

ON

OFF / ON

AREA SEL

DISPLAY

POSITION

COLOR

120

33

8

64

128

MAG

PAN

TILT

1/15

OFF

0

512

256

WDR / ATR-EX

DNR

DAY/NIGHT

3

BURST

CNTL SIGNAL

DELAY CNT

DAY->NIGHT

NIGHT->DAY

MODE

IR AREA

LEVEL

IR LED

COLOR NIGHT

PATTERN

POSH

POSV

LEVEL

GAIN CNTL

GAIN CNTL

MODE

MODE

ON

OFF (default)

OFF

ON

OFF

ON

OFF

AUTO

ON

AUTO / OFF / ON

SCENE SELECT

PRIVACY MASK

LEVEL

AUTO

WDR for V-Series, ATR-EX for A-Series

12

OSD MENU FEATURES/SETUP

PRIVACY MASK

MOTION DET

SYS SETTING

LANGUAGE

VERSION

MAINTENANCE

EXIT

TRANSP

MOSAIC

111

0

OFF

AREA SEL

AREA MODE

TOP

BOTTOM

LEFT

RIGHT

TYPE

MODE

ADJUST

SPEED

OFF

ON

LENS

CAMERA ID

1.01

W.PIX MASK

CAMERA RESET

SAVE / NOT SAVE / CANCEL / BACK

DETECT SENSE

INTERVAL

BLOCK DISP

MASK AREA

MONITOR AREA

AUTO

FLIP

LCD / CRT

OFF / ON

MANUAL COMP

AUTO COMP

DATA CLEAR

LEVEL1 / LEVEL2 / AUTO

YES / NO

1/4

OFF

DC

AUTO

30

REGISTRATION

REG. POINT

CURSOR COLOR

BLINK

REG. NUMBER

OFF / V / H / HV

CRT

English/ Spanish/ Russian/ Portuguese/ German/ French/ Chinese/ Japanese

13

OSD MENU FEATURES/SETUP

OSD menu Setup

Press the OSD menu SET key down to access the setup menu mode.

Sets the SHUTTER/AGC level to AUTO, MANUAL or FIX.

These options have been pre-configured at the factory for optimal performance.
You can choose one of FULL AUTO, INDOOR, OUTDOOR, BACKLIGHT, ITS and
CUSTOM according to the environments.
Each SCENE preset offers how to set SHUTTER +AGC, WHITE BAL, HLC/BLC,
WDR/ATR-EX, DNR, DAY/NIGHT, IR OPTIMIZER, LENS SHD COMP, DEFOG,
FLK LESS, and ANTI CR functions to get the best image for the SCENE SELECT.

If the selected preset does not seem to be the best choice, further adjustments
are available in each preset.

1. SCENE SELECT

1-1. SHUTTER/AGC

Video level is automatically controlled to follow the settings of AE LEVEL, AGC
MAX, SENS UP. In this mode, ‘DC Auto Iris Lens’ and ‘Fixed Lens’ are available.

1-1-1. AUTO:

Video level is manually controlled by the settings of SHUTTER, AGC MAX.
In this mode, ‘DC Auto Iris Lens’ is only available.

1-1-2. MANUAL:

> FULL AUTO: Optimized for the general scene.
> INDOOR: Optimized for indoor environment.
> OUTDOOR: Optimized for outdoor environment.
> BACKLIGHT: Optimized for backlight condition such as near the window in daylight.
> ITS: Optimized for the environment on traffic roads.
> CUSTOM: Setting for user customized environment.

SETUP MENU

1 / 2

SCENE SELECT
PICT ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYS SETTING

OFF
OFF

OFF

EXIT

FULL AUTO

ADVANCED MENU

1 / 2

SHUTTER/AGC
WHITE BAL
HLC/BLC
WDR/ATR-EX
DNR
DAY/NIGHT
IR OPTIMIZER

RETURN

AUTO
ATW
OFF
WDR

NIGHT
ON

14

OSD MENU FEATURES/SETUP

Automatically tracks the changes of color temperature and continuously adjusts
the white balance. The white balance range is 1,800 °K~10,500°K.

Note: If you set to ‘CUSTOM’ mode in ‘SCENE SELECT’ menu, the ‘WHITE BAL’
sub-menu will appear. ‘ATW/ PUSH/ USER1/ USER2/ MANUAL/
PUSH LOCK’ functions that you can select one.
Other modes in ‘SCENE SELECT’ menu, the ‘WHITE BAL’ sub-menu is only ‘
ATW’ function.

Ability to set the WHITE BALANCE mode.

1-2. WHITE BAL

ATW

SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT

200

RETURN

INDOOR

020

200

• SPEED (default: 200):

1-2-1. ATW (Auto Trace White Balance):

Video level is fixed in any conditions by the setting of SHUTTER, AGC MAX.

1-1-3. FIX:

Adjusts the AWB compensation delay to next update of AWB.
The smaller value will update AWB more frequently (faster).

• DELAY CNT (default: 20):

Determines the ATW range with respect to the fundamental range. Higher value
extends the ATW range at lower and higher color temperature.

• ATW FRAME (default: 200):

Selects INDOOR, SUNNY, SHADE or AUTO

• ENVIRONMENT (default: INDOOR):

Sets the AWB(Automatic White Balance) compensating speed. Lower value makes
AWB faster. * Too fast AWB may cause color oscillation.

15

OSD MENU FEATURES/SETUP

1-3. HLC/BLC

> INDOOR : Optimized for Indoor installation and more easily compensates ATW

for low color temperature such as incandescent lights.

> SUNNY : Optimized for outdoor sunlight applications and more easily compensates
ATW for high color temperature such as sunlight.

> SHADE : Optimized for shade area compensation.

> AUTO : Optimized for general scene.

Disables HLC and BLC functions.

1-3-1. OFF:

HLC (Highlight Cut out) :

HLC OFF HLC ON

BLC OFF BLC ON

BLC (Backlight Compensation) :
This function is used to brighten an image in the foreground with a highly bright area
behind it such as sunlight, limiting the affect of silhouette.

This function is used to black out highlighted (bright) areas, in order to enable a clear
visual image of objects, such as the license plates of an oncoming vehicle or other
objects that may be obstructed by headlamps.

16

OSD MENU FEATURES/SETUP

Sets enabling/disabling ATR compensation for better dynamic range (D-WDR) of
the image.
ATR feature improves the dynamic range and the visibility of the image by providing
the optimal gradation compensation of the image in one field. This is achieved by
two ways of image processing, luminance compression and contrast enhancement,
so that the tone can be enhanced at highlight (bright) and dark area.

Defines the threshold level for HLC. Lower value is more sensitive.

• CLIP LEVEL (default: 10):

1-3-2. HLC:

1-4-1. WDR(Wide Dynamic Range): V-Series Only

1-4-2. ATR-EX (Adaptive Tone Reproduction-EX):

• CONTRAST (default: MID): It can be selected only in ‘CUSTOM’ scene preset.

• CLEAR FACE (default: MID): Selects one of ‘LOW/MID/HIGH’

1-4. WDR/ATR-EX

1-5. DNR

Sets BLC function enable or disable.

1-3-3. BLC:

Note: BLC is available only in ‘CUSTOM’ scene preset.

Note: WDR is fixed except in ‘CUSTOM’ scene preset.

Select one of ‘WDR/ATR-EX/OFF’ in ‘CUSTOM’ scene preset.

Sets BLC function enable or disable

HLC clips out the highlight (bright) area and masks it as black color.
Video will be clipped out and masked for the area which exceeds CLIP LEVEL.

This function extends the gain range of the screen that is useful if the camera takes a
simultaneous picture of both indoor and outdoor. It improves contrast of the picture in
outdoor scenery as well as indoor. Video image is processed from two images by dual
shutter (long and short shutter) in a field to provide the best dynamic range. Highlight
area is compensated by the short shutter and dark area is compensated by the long
shutter. Final video may have less contrast compared to the conventional camera which
does not have WDR function.

DNR(Digital Noise Reduction) function improves picture quality by filtering out signal
noise which is generated under low light conditions. It is 3DNR (3-dimensional noise
reduction) which reduces the noise by multi frame comparison. Noise Reduction is
effective at low light. Setting a higher level of noise reduction may result in the loss of
sharpness and the tail effect of a comet may occur.

17

OSD MENU FEATURES/SETUP

AUTO mode in DAY/NIGHT is used only for a camera which does not have a light
sensor. Camera switches DAY from/to NIGHT automatically according to the
amount of light through the lens.

DAY/NIGHT is switched by amount of light through the lens.
Select one of ‘INT/EXT1/EXT2’

• CNTL SIGNAL (default: EXT1):

1-6-1. AUTO

DAY→NIGHT is a threshold level which determines to switch from DAY to NIGHT.
Lower(Higher) value makes the camera switch from Day to Night at lower(higher)
illumination. If it stays in Day(Color) mode at night time, increase DAY→NIGHT
threshold value until it just switches to Night.

* Examine and verify Day/Night operation according to IMPORTANT ACTIVITY

• DAY -> NIGHT (default: 80)

D/N AUTO SETUP

BURST
CNTL SIGNAL
DELAY CNT
DAY->NIGHT
NIGHT->DAY

003

RETURN

OFF
EXT1

080

120

BURST determines whether a color burst signal keeps outputting or eliminated
when camera switches to B/W.
If set to ON, B/W video signal contains color burst signal and is compatible with
color equipment but shows the same resolution as color video.
If set to OFF the color burst signal is removed from B/W video and shows better
resolution but a compatibility problem may occur with the color equipment.

• BURST (default: OFF)

DELAY CNT is time in second while camera maintains its status before Day↔
Night switches. DELAY can avoid the unwanted/frivolous switching by a short
term light such as light from a passing car.

• DELAY CNT (default: 3)

1-6. DAY/NIGHT

This function is used to control the setting during day-time and night-time operation.

18

OSD MENU FEATURES/SETUP

1-6-2. DAY :

1-6-3. NIGHT :

• Verify ‘DAY/NIGHT’ after completing all settings of lens for zoom and focus.

• If the gap between DAY->NIGHT and NIGHT->DAY is too small, camera may repeat
switching DAY from/to NIGHT. If NIGHT->DAY is decreased from the Factory default,
the same amount is recommended for DAY->NIGHT to avoid repeating
DAY<->NIGHT unintentionally.

CAUTION

DAY->NIGHT and NIGHT->DAY operations must be examined and verified at
the final installation.

Block the lens for a few seconds for NIGHT mode and release and let it return to
DAY mode. If camera stays at NIGHT mode more than 10sec, decrease NIGHT->
DAY THRESHOLD a little and repeat the fore-mentioned steps. If the scene

is too dim or lens iris was adjusted too low(near close), it may not return to DAY.

IMPORTANT ACTIVITY

• BURST (default: OFF) :

NIGHT→DAY is a threshold level which determines to switch from NIGHT to DAY.
Lower(Higher) value makes the camera switch from Night to Day at lower
(higher) illumination. If it stays in Night(B/W) mode in day time, decrease NIGHT->
DAY threshold value until it just switches to Day

* Examine and verify Day/Night operation according to IMPORTANT ACTIVITY

• NIGHT -> DAY (default: 120)

Sets the BURST option ON/OFF to output burst signal in B/W mode.

The camera is always in B/W mode.

The camera is always in Color mode.

19

OSD MENU FEATURES/SETUP

• DAY/NIGHT : Follows the setting of DAY/NIGHT function.

• OFF : Turns IR LED off.

• FIX : Fixes the brightness of IR LED in any condition.

IR OPTIMIZER SETUP

MODE
IR AREA
LEVEL
IR LED
COLOR NIGHT
IR SHADE COMP

002

RETURN

AUTO

---

DAY/NIGHT
OFF
OFF

SET1

MID

IR LED AUTO

LEVEL MIN
LEVEL MAX

006

RETURN

255

IR SHADE COMP SETUP

PATTERN
POSH
POSV
LEVEL

006

RETURN

255

1-7. IR OPTIMIZER

1-7-1. MODE : AUTO

Reducing the over-saturation is automatically adjusted along with the location of
the subject.

1-7-3. LEVEL (default: 002):

1-7-2. IR AREA :

Sets the IR OPTIMIZER AREA this function works in
‘CUSTOM preset only.

This function is used to adjust the overall when IR OPTIMIZER is working.
If the LEVEL is too high, over-saturation could occur.

1-7-4. IR LED: Sets the IR LED ON/OFF controlling

1-7-5. COLOR NIGHT (default: OFF): Displays night video in color.

1-7-6. IR SHADE COMP (default: OFF):

This function is used to compensate
for IR shade of the side areas on screen
when IR LED is ON. You can adjust
the shading PATTERN, POSITION
and LEVEL.
If the LEVEL is high, the screen noise
could be increased at the side areas.

This function is effective for built-in LED models in NIGHT mode only.
If subjects which can cause overexposure are located near the monitored area, you
can adjust IR OPTIMIZER level or area.

20

OSD MENU FEATURES/SETUP

LENS SHD COMP

PATTERN
POSH
POSV

290

RETURN

SET1

480

PICT ADJUST

BRIGHTNESS
CONTRAST
SHARPNESS
HUE
COLOR GAIN

120
033
008
064
128

RETURN

1-8. LENS SHD COMP (default: OFF)

This function is used to caculate the compensation data for lens shading.
Convex shape of the lens causes the light to enter the camera unevenly and typically
makes the center of the screen brighter than the rest. It is used to compensate for this
undesirable effect and make the screen more even.
Set to ‘ON’, you can adjust the shading PATTERN and POSITION.

1-9. DEFOG (default: ON)

1-10. FLK LESS (default: AUTO)

1-11. ANTI-CR (default: AUTO)

2. PICT ADJUST

This function is used to carry out defog function. Sets LEVEL to eliminate amount of
fog on screen.
If the DEFOG is set to ON, the WDR/BLC function will be deactivated.

This function is used to remove the flickering on screen due to differences in light and
electric frequencies.

This mode can minimize problems related to color rolling caused by differences
between the flicker of fluorescent lights and the frequency of the camera.

21

OSD MENU FEATURES/SETUP

Increases or decreases the brightness of the picture.
This is different from that of DC iris lens and simply increases or decreases the digital
gain of video. Do not increase this too much, the dynamic range for the highlight area
will decrease.

2-1. BRIGHTNESS (default: 120):

2-2. CONTRAST (default: 033):

3-1. MAG (default: 000):

When MAG is greater than 0, the electronic pan is available.
000 is the left most pan and 1023 is the right most pan.

3-2. PAN (default: 512):

When MAG is greater than 0, the electronic tilt is available.
000 is the upper most tilt and 511 is the lower most tilt.

3-3. TILT (default: 256):

Increases or decreases the sharpness of the picture.
Too much sharpness can make image harsh and show more noise as well as line
flicker at the edge of objects in the picture.

2-3. SHARPNESS (default: 008):

2-4. HUE (default: 064): Adjusts hue for NTSC version only.

2-5. COLOR GAIN (default: 128): Increases or decreases the color saturation.

Sets the maximum digital zoom magnification. E.ZOOM function enlarges the pixel
itself, which can cause deterioration of the picture quality.

3. EZOOM

This function is used to reduce and stabilizest a shaky image from a camera installed
in an area with vibration. FOV(Field of view) will be reduced if set to ON.

4. DIS (Digital Image Stabilization)

Adjusts the strength of the image contrast. If set to too high, the dark area may loss
detail and the high luminance area may saturate.

MAG is the magnification ratio of the electronic zoom. Sets from x000 to x255.

22

OSD MENU FEATURES/SETUP

Sets ON/OFF for enabling/disabling PRIVACY.
Up to 15 privacy areas are available and each area is programmable in size and
location. The number of privacy areas is limited to four when MOTION DET >
MONITOR AREA is ON.
The privacy areas are masked with the color selected by PRIVACY MASK>COLOR.

5. PRIVACY MASK

PRIVACY MASK SETUP

AREA SEL
DISPLAY
POSITION
COLOR
TRAMSP
MOSAIC

RETURN

1/15
ON

RED

1.00

-----

5-1. AREA SEL (default: 1/15)

5-2. DISPLAY (default: OFF)

Displays OFF/ON for the mask area which you selected ‘AREA SEL’

5-3. POSITION : Adjusts the mask area X,Y-Axis position which you selected ‘AREA SEL’

: Selects one of AREA1~AREA15 to be adjusted.

• TOP/BOTTOM: ◄button moves up and ►button moves down the top (bottom)
border of the selected window at AREA SEL.

• LEFT/RIGHT: ◄button moves left and ►button moves right the left (right) border
of the selected window at AREA SEL.

5-4. COLOR

: Selects one of 8 colors (Red, Green, Blue, Yellow, Cyan, Magenta, White,
Black) for the selected mask window at AREA SEL.

5-5. TRANSP : Transparency rate for the mask can be adjusted.

0.00 - Mask is fully transparent and not visible.

0.50 - Mask is 50% transparent.

0.75 - Mask is 25% transparent.

1.00 - Mask is not transparent.

5-6. MOSAIC

Enables or disables the mosaic effect for the selected mask window at AREA SEL

23

OSD MENU FEATURES/SETUP

MOTION DETECTION

DETECT SENSE
INTERVAL
BLOCK DISP
MASK AREA
MONITOR AREA

111
000

OFF

RETURN

RETURN

6-4. MASK AREA

Sets MASK AREA for disabling MOTION DETECTION.
Selects number of area cells to set the area you need.

Up to 4 motion detection areas are available and each area is programmable in size
and location. The motion is displayed by means of blocks when MOTION DET and
MOTION DET>BLOCK DISP are ON.

6. MOTION DET

6-1. DETECT SENSE

(default: 111)

Adjusts the sensitivity for detecting motion. Higher value is more sensitive.

6-2. INTERVAL (default: 0)

Sets the interval time from the starting of motion operation until being ready for the next
motion operation.

6-3. BLOCK DISP (default: OFF)

Enables or disables displaying blocks for the area which the motion is detected

1 2 3 4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 19 20 21 22 23 24

25 26 27 28 29 30 31 32 33 34 35 36

37 38 39 40 41 42 43 44 45 46 47 48

49 50 51 52 53 54 55 56 57 58 59 60

61 62 63 64 65 66 67 68 69 70 71 72

73 74 75 76 77 78 79 80 81 82 83 84

85 86 87 88 89 90 91 92 93 94 95 96

24

OSD MENU FEATURES/SETUP

• TOP/BOTTOM: ◄button moves up and ►button moves down the top (bottom)
border of the selected window at AREA SEL.

• LEFT/RIGHT: ◄button moves left and ►button moves right the left (right) border
of the selected window at AREA SEL.

MONITOR AREA

AREA SEL
AREA MODE
TOP
BOTTOM
LEFT
RIGHT

03
04
04
08

1/4
ON

RETURN

SYSTEM SETTING

LENS
FLIP
LCD/CRT
COMMUNICATION
CAMERA ID

AUTO

OFF

CRT

OFF

RETURN

Sets the system related functions.

7. SYS SETTING

6-5. MONITOR AREA

6-5-1. AREA SEL

(default: 1/4) : Selects one of AREA1~AREA4 to be adjusted.
Each area is displayed with the color. AREA1-Red, AREA2-Green, AREA3­ Blue, AREA4-Yellow

6-5-2. AREA MODE (default: OFF):

Setting ON activates the AREA SEL which you selected.

Sets the MOTION DETECTION area on screen.

6-5-3. TOP/ BOOTTOM / LEFT / RIGHT

Sets the AREA SEL box sizes and positions with four direction points.

25

OSD MENU FEATURES/SETUP

7-4. COMMUNICATION

Sets the communication related function.
PROTOCOL(PELCO-D), BAUDRATE(9600), DATABIT(8), PARITY(OFF), STOPBIT(1)
are fixed. Can set only ADDRESS number.

COMMUNICATION

PROTOCOL
ADDRESS
BAUDRATE
DATABIT
PARITY
STOPBIT

001

RETURN

PELCO-D

9600
8BIT
OFF
1BIT

Selects the lens type, AUTO or MANUAL. AUTO supports DC auto-iris lens only.

• TYPE (default: DC): This camera does NOT support video type auto iris lens.

MUST BE SET TO DC ONLY.

• MODE (default: AUTO):
Lens iris is automatically controlled according to the scene light level.

• ADJUST : Adjusts lens open control regardless of the light level.

• V : Flips the video signals vertically.

• H : Flips the video signals horizontally.

• HV : Flips the video signals horizontally and vertically.

• SPEED (default: 30):

Adjusts the iris control speed. The lower value is the faster speed.
If the speed is too slow or fast, the iris control may be unstable.

7-1-1. AUTO

7-2. FLIP :

This function is used to inverse the pictures coming from the camera.

7-3. LCD/CRT (default: CRT):

7-1. LENS

Select the correct type of viewing monitor will ensure the most optimal picture.

26

OSD MENU FEATURES/SETUP

Set ON/OFF for enabling/disabling of ID display. Factory default ID is Software
version of camera. User programmed camera ID will be lost and restored with
factory default ID by CAMERA RESET.
Up to 40 characters can be input for camera ID.

7-4. CAMERA ID

CAMERA ID SETUP

VER-DN1.0

RETURN

ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!”#$%&’(
)_`,¥:;<=>?@\^*↑↓←→/

CLR

CHR1 CHR2

CAMERA ID input line

COMMAND line

POS

8. LANGUAGE

The camera firmware version is displayed.

9. VERSION

● Use four direction buttons (▲/▼/◄/►) to move the block cursor in character table
and press the set button (

◙) to input the selected character.

To move the character input position on CAMERA ID input line, move the cursor to

← or → on COMMAND LINE and press the set button on ← or →.

● CLR : To clear CAMERA ID input line, move the cursor to CLR on COMMAND LINE

and press a set button (

◙).

● POS : To set the location of CAM TITLE to be displayed on the monitor, move the

cursor to POS and press the set button (

◙) and then the OSD menu disappears and

CAMERA ID will be displayed on the monitor.
Move CAMERA ID to desired position by using four direction buttons (▲/▼/◄

/ ►) then press the set button (

◙) to fix. The OSD Menu will appear again.

8 languages, ENGLISH, SPANISH, RUSSIAN, PORTUGUESE, GERMAN,
FRENCH, CHINESE and JAPANESE are available.

27

OSD MENU FEATURES/SETUP

Set the OSD menu user environments and Camera reset.

10. MAINTENANCE

• REGISTRATION : Detects each white pixel using the cursor.

• REG. POINT : Displays white pixels in color which you detected.

• CURSOR COLOR : Selects cursor color one of green, red, or blue.

• BLINK : Sets the cursor blink or not.

• REG. NUMBER : Displays quantity of detected white pixels.

10-1-1. MANUAL COMP

: Setting for white pixel(defective pixels) compensation manually.

MAINTENANCE

W.PIX MASK

CAMERA RESET

RETURN

MANUAL

This function is used to compensate white pixels(defective pixels).

10-1. W.PIX MASK

MANUAL COMP

REGISTRATION
REG.POINT
CURSOR COLOR
BLINK
REG. NUMBER

RETURN

OFF
WHITE
OFF
3 / 64

AUTO COMP

LEVEL1
LEVEL2
AUTO

RETURN

003
255

: Setting for white pixels(defective pixels) compensation automatically.

• LEVEL1 : Sets the threshold of the detection for white pixels.

• LEVEL2 : Sets the threshold of the detection for very large white pixels.

• AUTO : Starts the automatic detection of white pixels.

10-1-2. AUTO COMP

28

OSD MENU FEATURES/SETUP

This function is used to reset to the factory defaults of the camera settings.

10-2. CAMERA RESET

11-1. SAVE : Save all the setting before exiting the setup menu.

11-2. NOT SAVE : Exit the setup menu without saving.

11-3. CANCEL : Cancel the exit mode.

11-4. BACK : Go back to the previous menu mode.

Exits SETUP MENU and returns to the normal display.

11. EXIT

HEATER / BLOWER OPTION (Vandal Versions)

Detailed Specifications VT-MD-HB24

Power Supply

Power Consumption

Heater

Blower

Extreme Weather Heater - Optional

24 VAC

10W (Heater) / .7W (Blower)

On: at 41ºF / Off at 59ºF

Continuous 24 Hour Operation

Operation down to -60ºF

29

INDOOR WDR SPECIFICATIONS

Detailed Specifications VTD-MS2810WDR VTD-MS922WDR

Image Device

Resolution

Effective Pixels

Minimum Illumination

Lens Options

Day/Night

WDR

Noise Reduction

Motion Detection

Privacy Mask

White Balance

FLIP

Synchronization

S/N Ratio

Electronic Iris

Advanced OSD Functions

OSD Language

Digital Image Stabilazation

DSS

Digital Zoom

Power Source

Power Consumption (12VDC)

Power Consumption (24VAC)

Operating Conditions

Dimensions (H x Dia.)

Weight

1/3” 960H High Density Double Scan Sony CCD w/Effio-V

750TV Lines

976(H) x 494(V)

0.0001 Lux (F1.2@40 IRE, DSS x4)

True Day/Night by ICR

YES

XD-DNR (2D+3D DNR)

4 Programmable Zones

Polygon Masking with 15 Programmable Zones

ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK

H-Flip, V-Flip, H/V Flip

Internal

More than 52dB with AGC OFF at 50IRE

1/60 ~ 1/100,000sec

Defog, BLC/HLC, Privacy Masking, Motion Detection, Flip, LSC

English, Spanish, Portuguese, German, French, Russian, Chinese

YES

YES

Up to X12 Digital Zoom

UL Certified: 12VDC / 24VAC

2.64 W / 220 mA

2.64 W / 110 mA

-4°~122°F (-20°-50°C)

4.45” x 5.71” (113mm x 145mm)

1lb / .46Kg

2.8-10mm 9-22mm

30

VANDAL WDR SPECIFICATIONS

Detailed Specifications VTD-MVS2810WDR VTD-MVS922WDR

Image Device

Resolution

Effective Pixels

Minimum Illumination

Lens Options

Day/Night

WDR

Noise Reduction

Motion Detection

Privacy Mask

White Balance

FLIP

Synchronization

S/N Ratio

Electronic Iris

Advanced OSD Functions

OSD Language

Digital Image Stabilazation

DSS

Digital Zoom

Water Resistance

Power Source

Power Consumption (12VDC)

Power Consumption (24VAC)

Operating Conditions

Dimensions (H x Dia.)

Weight

1/3” 960H High Density Double Scan Sony CCD w/Effio-V

750TV Lines

976(H) x 494(V)

0.0001 Lux (F1.2@40 IRE, DSS x4)

True Day/Night by ICR

YES

XD-DNR (2D+3D DNR)

4 Programmable Zones

Polygon Masking with 15 Programmable Zones

ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK

H-Flip, V-Flip, H/V Flip

Internal

More than 52dB with AGC OFF at 50IRE

1/60 ~ 1/100,000sec

Defog, BLC/HLC, Privacy Masking, Motion Detection, Flip, LSC

English, Spanish, Portuguese, German, French, Russian, Chinese

YES

YES

Up to X12 Digital Zoom

IP-68

UL Certified: 12VDC / 24VAC

2.64 W / 220 mA

2.64 W / 110 mA

-4°~122°F (-20°-50°C)

4.45” x 6.73” (110mm x 170mm)

2.3 lb / 1.04Kg

2.8-10mm 9-22mm

31

INDOOR DAY/NIGHT SPECIFICATIONS

Detailed Specifications VTD-MS2810DN VTD-MS922DN VTD-MS1850DN

Image Device

Resolution

Effective Pixels

Minimum Illumination

Lens Options

Day/Night

WDR

Noise Reduction

Motion Detection

Privacy Mask

White Balance

FLIP

Synchronization

S/N Ratio

Electronic Iris

Advanced OSD Functions

OSD Language

Digital Image Stabilazation

DSS

Digital Zoom

Power Source

Power Consumption (12VDC)

Power Consumption (24VAC)

Operating Conditions

Dimensions (H x Dia.)

Weight

1/3” 960H High Density Double Scan Sony CCD w/Effio-A

750TV Lines

976(H) x 494(V)

0.0005Lux (Sens-up OFF)

9-22mm

True Day/Night by ICR

D-WDR by ATR-EX2

XD-DNR (2D+3D DNR)

4 Programmable Zones

Polygon Masking with 15 Programmable Zones

ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK

H-Flip, V-Flip, H/V Flip

Internal

More than 52dB with AGC OFF at 50IRE

1/60 ~ 1/100,000sec

Defog, BLC/HLC, Privacy Masking, Motion Detection, Flip, LSC

English, Spanish, Portuguese, German, French, Russian, Chinese

YES

YES

Up to X12 Digital Zoom

UL Certifieed: 12VDC / 24VAC

2.64 W / 220 mA

2.64 W / 110 mA

-4°~122°F (-20°-50°C)

4.45” x 5.71” (113mm x 145mm)

1lb / .46Kg

2.8-10mm 18-50mm

32

VANDAL DAY/NIGHT SPECIFICATIONS

Detailed Specifications VTD-MVS2810DN VTD-MVS922DN VTD-MVS1850DN

Image Device

Resolution

Effective Pixels

Minimum Illumination

Lens Options

Day/Night

WDR

Noise Reduction

Motion Detection

Privacy Mask

White Balance

FLIP

Synchronization

S/N Ratio

Electronic Iris

Advanced OSD Functions

OSD Language

Digital Image Stabilazation

DSS

Digital Zoom

Water Resistance

Power Source

Power Consumption (12VDC)

Power Consumption (24VAC)

Operating Conditions

Dimensions (H x Dia.)

Weight

1/3” 960H High Density Double Scan Sony CCD w/Effio-A

750TV Lines

976(H) x 494(V)

0.0005Lux (Sens-up OFF)

9-22mm

True Day/Night by ICR

D-WDR by ATR-EX2

XD-DNR (2D+3D DNR)

4 Programmable Zones

Polygon Masking with 15 Programmable Zones

ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK

H-Flip, V-Flip, H/V Flip

Internal

More than 52dB with AGC OFF at 50IRE

1/60 ~ 1/100,000sec

Defog, BLC/HLC, Privacy Masking, Motion Detection, Flip, LSC

English, Spanish, Portuguese, German, French, Russian, Chinese

YES

YES

Up to X12 Digital Zoom

IP-68

UL Certified: 12VDC / 24VAC

2.64 W / 220 mA

2.64 W / 110 mA

-4°~122°F (-20°-50°C)

4.45” x 6.73” (110mm x 170mm)

2.3 lb / 1.04Kg

2.8-10mm 18-50mm

33

IR SPECIFICATIONS

Detailed Specifications VTD-MVS2810/L35 VTD-MVS922/L35 VTD-MVS1850/L35

Image Device

Resolution

Effective Pixels

Minimum Illumination

Lens Options

IR LEDs (Built-In)

Day/Night

WDR

Noise Reduction

Motion Detection

Privacy Mask

White Balance

FLIP

Synchronization

S/N Ratio

Electronic Iris

Advanced OSD Functions

OSD Language

Digital Image Stabilazation

DSS

Digital Zoom

Power Source

Power Consumption (12VDC)

Power Consumption (24VAC)

Operating Conditions

Dimensions (H x Dia.)

Weight

1/3” 960H High Density Double Scan Sony CCD w/Effio-A

750TV Lines

976(H) x 494(V)

0.0005Lux (Sens-up OFF) / 0 Lux w/IR ON

9-22mm

35 IR LED’s with up to 120’ Range

True Day/Night by ICR

D-WDR by ATR-EX2

XD-DNR (2D+3D DNR)

4 Programmable Zones

Polygon Masking with 15 Programmable Zones

ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK

H-Flip, V-Flip, H/V Flip

Internal

More than 52dB with AGC OFF at 50IRE

1/60 ~ 1/100,000sec

Defog, BLC/HLC, Privacy Masking, Motion Detection, Flip, LSC

English, Spanish, Portuguese, German, French, Russian, Chinese

YES

YES

Up to X12 Digital Zoom

UL Certified: 12VDC / 24VAC

150mA (IR OFF) / 480mA (IR ON)

170mA (IR OFF) / 430mA (IR ON)

-4°~122°F (-20°-50°C)

4.45” x 6.73” (110mm x 170mm)

1lb / .46Kg

2.8-10mm 18-50mm

34

31

Indoor Vandal

DIMENSIONS

35

OTHER PRODUCTS FROM VITEK

VTC-C960DS / VTC-C960WS

750 TVL 960H True Day/Night CCD Cameras w/Effio-A/V
Processing

• VTC-C960DS: 750 TVL 960H True Day/Night CCD Camera w/Effio-A
Processing

• VTC-C960WS: 750 TVL 960H WDR Day/Night CCD Camera w/Effio-V
Processing

• 1/3” High density Sony CCD (960H)

• High Resolution of 750 Horizontal Lines

• Small scale design to fit in 5” dome enclosures such as the Pelco DF5
Housing

• E-WDR by ATR-EX (Adaptive Tone Reproduction) (VTC-C960DS)

• True WDR (Wide Dynamic Range) (VTC-C960WS)

• Sensitivity of 0.0005 Lux

• XD-DNR (2D+3D DNR) Advanced Digital Noise Reduction

• True Day/Night by ICR - Infrared Cut Removal

• Built-in Motion Detection with a 24x16 Grid

• Privacy Mask function with up to 15 programmable mask areas

• 12VDC / 24VAC Dual Voltage Operation

• Lenses Sold Separately

36

OTHER PRODUCTS FROM VITEK

VT-SRE Series

Spire Series 4, 8, & 16 Channel 960H Digital Video Recorders

SPIRE Elite Series

960H Digital Video Recorders

• Supports High Resolution 960H Cameras

• 4, 8 or 16 Video Inputs with 1 HDMI, 1 Spot Monitor Output and 1 VGA
output

• H.264 Compression

• Up to 480fps Live Display & 480fps Recording (VT-SRE916) / 240/240
(VT-SRE908) / 120/120 (VT-SRE904)

• Supports both Dynamic and Static IP Addresses

• 4 Audio Inputs / 1 Audio Out

• 4 Alarm Inputs / 2 Relays Out

• Supports Four internal Hard Drives (VT-SRE908/VT-SRE916) / Two
internal Hard Drive (VT-SRE904)

• Supports 4TB Hard Drives

• Remote Viewing over the Internet via Web Browser or LAN

• Applications for iPhone, iPad, iTouch and Android Devices

• “Quick Search” Function for automatic review

• Mac OSX Client & CMS Central Management Software Included

• Automatic sending of Health & Event notifications via email

• Control locally via Front Panel Controls, USB Mouse or with the Included
IR Remote control

• PTZ Control over RS-485

• Rack Mountable (Optional VT-SRE-RK Rack Kit)

28492 Constellation Road ValenCia, Ca 91355

WWW.ViteKCCtV.CoM

LIMITED LIABILITY WARRANTY

VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is nontransferable and extends
only to the original buyer or end user customer of a VITEK Authorized
Reseller.

The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the guar­antee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels. War­ranty support is available only if product is purchased through a VITEK
Authorized Reseller.

Version 3.0

May 2015