TimeFlex Manual
Preset 5 different count down time
modes between 0-999 minutes.
Front side:
The front side has 5 different
colored buttons named
activity buttons, 5 different
small orange lights named
key lights, 1 LED staple and
1 LCD window.
Right side:
On the right side of the
unit there is a plug hole
for an external headphone
and a slide button to select
vibration on/vibration off
during the last 10 second
period and when the preset
count down time is about
to elapse.
Back side:
The back side has 5 different
setting buttons marked:
Sort Up , Sort Down ,
+, –, a stand and a
OK,
battery compartment which
holds 3 AA batteries.
www.talktech.se
How to set the 5 different activity key buttons
1. Press and hold both of the Sort Up and Sort Down buttons on the backside of the unit for 3 seconds
– the unit will turn into the power on setting mode and is indicated when the 5 key lights and the LCD starts
to twinkle.
2. Press any of the activity buttons. The key light will stop to twinkle (LCD now shows the last stored activity
time. (First time setting the LCD shows 000)
3. Press any of the Sort Up and Sort Down buttons step by step for setting each minute up or down.
(Press and hold any of them for quick forward or quick reverse action).
4. Confirm the setting by pressing the OK button. All key lights starts to twinkle. Now you can choose another
activity button for another setting (start from step 2).
5. To end the setting operations and to get into the power off mode, press and hold both of the
Sort Up and Sort Down buttons for 3 seconds. (The unit turns automatically into the power off
mode after 1 minute if no action is there).
NOTE: Before going into the operating mode, TimeFlex has to be turned into the power off mode.
How to use TimeFlex in the operating mode
1. Press any of the 5 activity buttons. The key light comes on and the LCD window shows preset count down
time. (Now the operating mode is in Power on).
2. It is now possible to step between the 5 different preset count down times.
3. Choose any of the preset count down times and confirm the count time function to start, by pressing the same
key again. The count down now starts and is indicated by a fully lighted LED staple. (Any preset count down
time between 0-999 minutes will always show a fully lighted LED staple when the count down time function
starts).
4. 10 seconds before the count down time will elapse, the alarm sound comes on and the LED staple including
the 5 activity keys starts to twinkle.
5. After fully elapsed time the unit turns into the power off mode automatically.
6. To s to p a ny c ou n t do wn ti me a lr ea dy s ta rt e d – pr es s an d h ol d th e a ct ua l activity button for 5 seconds and
TimeFlex turns into the power off mode.
To set the volume sound level
Press and hold both of the Sort Up and Sort Down buttons for 5 seconds to reach the alarm volume
setting mode. Set alarm sound level by pressing any of the Sort Up and Sort Down buttons to select
any of the 5 levels and where the lowest level is silence. Select level and again press and hold both of the
Sort Up and Sort Down buttons to leave the volume setting mode.
The unit turns automatically into the power off volume setting mode after 1 minute if no action is there.
Vibration on/off
The 10 second vibration function can be freely chosen to be there or not by sliding the vibration button on
the right side of the unit to on or off.
Earplug
To us e t he ea rp lug t o l is ten t o t he 10 s eco nd al ar m – p ut th e e ar pl ug ca bl e i nt o th e e ar pl ug ho le .
Contact
If you do have any questions or complaints – please contact your local dealer.
Other pictures
Magnetic function Can be replaced if broken
Designed and distributed by:
6МiVКККUКК*°"КЭКЗ {ККUКК-£О£КдЗК >V>ККUК К-Ьi`iККUКК>\К6МiVJ Мi>°VККUККЬЬЬ°М>МiV°Г i
Loading...