Vitall V HM011 User Manual

Vitall Intelligent Health Watch

How to wear it and test
a. How to wear it

  

b. How to test

 .

Wear it feel the strong pulse and pull the buckle
After that, upturn your palm slightly; when you feel slight tightness of your pulse, start to
measure your blood pressure.

Button instructions

Turn on/off

Emergency help

Health data detection

Health consultation

I. Turn on/off:

Turn on: The button beside the white icon on the upper left for three seconds. Then the

screen will appear logo “Vitall” which means you turn it on successfully.

Turn off:

a. Normal turn-off: Press the turn-off button for several seconds to turn off the device. It

will appear the question “Sure to power off?”, just press the confirm key - the icon

or the red button beside the icon “+” on the lower left to switch it off.

b. Quick turn-off: Press the Turn on/off button on the upper left and the Health

consultation button on the lower right at the same time to switch it off.

c. Power save mode: If there is no operation for a while, the device will be in power

save mode. In this case, you can press turn on/off button slightly to light the screen
on again. You can also press turn on/off button slightly to switch the device into
power save mode during operation.

d. Back to the initial page: slightly press the button beside the icon on the upper left

during the usage and you can return to the init ial page. Or you can click the return

key

on the lower right of the page to be back to previous view.

II. Emergencyhelp:

Press the red button beside the icon “+” on the lower left for three seconds, the main screen
will show “Be in positioning”, and you are getting through to the emergency help center. At the
same time, your family and our customer service center will be informed.

(Note: if you made a careless mistake to press this button, you are supposed to turn off the
device to hang off.)

Healthdatadetection:

III.

Press health detection button on the upper right for three seconds, and you can start to
measure your heartbeat, blood pressure, calories, body temperature, etc.

Healthconsultation:

IV.

Press the green health consultation button for three seconds and you can get through to our
customer service center to consult on your health condition. While short press it, you will get
through to your default family contacts.

· Emergency help key

SOS key is uniquely designed for emergent situations.

Press emergency help key to get through to our emergency center to ask for help.

(Note: The key is only for emergency use.)

· consultation service key

Press health consultation key to get instructions on daily life and health. (VIP’s rights)

· Easy calling

Select the health data detection page. Touch the icon in the middle.

And you will see the page

.

a. Help: to call for Emergency help;

b. Family: to call your family;

c. Consult: to call our health service center for health consultation.

Part I Health function

· Bloodpressuremeasurement

IProcedures

a. Turn on the device into the main page and click the first icon

on the upper right into

the health data detection page . Touch the icon into blood pressure

measurement page .
b. Click “Pressure” and according to the text instruction measure your heartbeat and blood

pressure by touching
calibration.)

c. The correct waveform graph of blood pressure should be like this --

smooth and sleek; otherwise, it’s incorrect -- with jagged edges, which
requires another try. After measurement, your heartbeat and systolic/diastolic pressure will be

. (Note: New user should start this measurement with parameter

automatically produced in a bar chart, like this
diastolic pressure and the yellow part means systolic pressure. The number on the right stands

for heartbeat rate. Upon your requests, these values can be sent to your family by text message.
Just call our service center to set this function.

d. To exit this option, press the Return icon
e. II Quick measurement

f. Press the health data detection button on the upper right and the device will carry out
automatic measurement. (Note: Some versions don’t support this function.)
g. Body temperature measurement
h. The device’s temperature is always available. But due to the tightness of the watchband and
environmental factors, the data collected is not the actual body temperature. However, if you
need the precise data, please put the device in a right position for detection, make the
watchband close to your skin for at least 3 to 5 minutes.

i. Select the health data detection page. Touch the icon

at the bottom, right corner.

.

. The blue part means