Visual Sound H2O, JEKYLL & HYDE, DOUBLE TROUBLE, ROUTE 66, ANGRY FUZZ Instruction Manual & Product Manual
...
4922 Port Royal Road B-11 6 Spring Hill, Tennessee 37174 6 931-487-9001
www.visualsound.net 6 www.myspace.com/visualsoundusa
Bob Weil and R.G. Keen worked hard to design this pedal for you, using their ears and engineering skill to produce the best
effects possible. They also tested the pedals during the design phase with many great guitarists to get their opinions on tone
and features. What resulted is the pedal you’re holding right now. Not only will you love the sound of your new pedal, but you
can rely on it to last for many years to come.
The new switching system in the V2 Series is designed to last for 10 million foot-stomps...yes, that’s basically forever! All the
jacks including the power jack are hand-wired, point-to-point, to the circuit board so if you accidentally step on a plug, it will
keep on working. Even if you plug in a 9VAC power supply by mistake, it won’t burn up your pedal as would happen in most
other effects...it won’t work, but it won’t do any damage. As always, Visual Sound effects pedals can take a variety of
musician rated 9VDC adapters*, including of course the 1 SPOT
®
power supply made by Visual Sound.
You will also benefit from the Pure Tone buffer circuit used in all Visual Sound effects pedals since 1997. The Pure Tone
circuit is a unity gain pre-amp buffer designed to make your guitar sound like it’s plugged directly into the amp even if it’s
going through long cables and many other effects pedals...something “true-bypass” pedals could never give you.
Use this instruction manual as a guide for getting started with great tones from your new V2 Series pedal. Of course,
you should experiment with your own settings as well...there are no rules when it comes to discovering your own sound.
Just find the tones that inspire you to play. That’s what it’s all about!
*Boss, Ibanez, Dunlop, Morley, Voodoo Labs and other musician rated 9VDC power supplies will also work (output plug with center pin negative)...do not use Radio Shack or other non-musician
power supplies. Shameless promotional plug: The 1 SPOT is the best 9VDC power supply for all your pedals!
Anyone who has ever tried the H2O pedal has loved it. “Warm”, “liquid”,
and “lush” are some of the words frequently used to describe this pedal.
The new
V2 Series
H2O gives the same great tone guitarists have come
to love over the years, but with all the advantages of V2construction.
Chorus, Echo
, or both...use each channel by itself or combine them
just as you would two separate pedals! The
Chorus
channel is
a wonderfully voiced effect for electric, acoustic, or bass
guitar, using pure analog circuitry. At the heart of the
Chorus
circuit are custom designed Visual Sound “bucket brigade”
chips. Use the
Norm/Lush
switch to set the overall style of
Chorus and the user-friendly knobs for the settings. The
Echo
channel is a hybrid digital and analog circuit for the best of both
worlds...long delay times with warm, natural repeats. There is
even a second (non-effected) output jack for stereo amplifier
setups. On the following pages are some settings to get you started...
SUBTLE PHASING CHORUS LUSH CHORUS UNDERWATER LESLIE 70s CHORUS
CHORUS CHANNEL SETTINGS CHORUS CHANNEL SETTINGS
NOTE: USE THE ‘NORM/LUSH’ SWITCH TO CHOOSE BETWEEN A SUBTLE CHORUS OR A VERY LUSH, FULL CHORUS.
ECHO CHANNEL SETTINGS ECHO CHANNEL SETTINGS
NOTE: ‘OUT 2’ IS A DRY, UNEFFECTED OUTPUT.
CLASSIC SLAPBACK HARMONY ECHOS SPACIOUS ECHO ROCKABILLY ECHO
H2O
Normal/Lush switch added on Chorus
channel. Same great chorus and echo
tones that H2O is famous for
..
JEKYLL & HYDE
New noise reduction and improved Mid control on Hyde
channel. Additional low-drive range on Jekyll channel.
Same great overdrive and distortion tones that
Jekyll & Hyde is famous for.
DOUBLE TROUBLE
Visual Sound’s interpretation of the TS-808
(with bass boost and lots more volume),
times 2! Use either overdrive by itself or
combine them.
ROUTE 66
New noise reduction on Compressor channel.
Additional low-drive range on overdrive channel.
Same great compression and overdrive tones
that Route 66 is famous for.
COMP 66
The compressor channel of the new Route 66
in a single pedal.
SON OF HYDE
The Hyde distortion channel from the new
Jekyll & Hyde in a single pedal.
ROUTE 808
One channel of Double Trouble in a single pedal...
Visual Sound’s interpretation of the TS-808 (with bass
boost and lots more volume).
LIQUID CHORUS
The chorus channel of the new H2O in a single pedal,
with an added Depth knob. Also has 2 outputs, normal and
inverted, for running in stereo.
ANGRY FUZZ
A brand new effect unlike any fuzz pedal you’ve ever heard. Blend in an
octave up with the Anger Level knob and get crazy low octave overtones to
boot! Octave tracking is flawless even with the fastest shredding imaginable.
Originally released in 1995 and now
back by popular demand, the new Visual
Volume 10th Anniversary Edition is the
finest, most useful volume pedal
ever created. Don’t just try to
find the right volume by ear, see it with
the 0-10 LED readout!
; All new
design with
die-cast aluminum
housing and blue
LEDs!
; Active and
Passive modes
; Clean boost pre-amp
in Active mode
; Two inputs and
outputs for mono
or stereo use
; Tuner Out jack for
silent tuning
EXCELLENT
FOR LIVE PLAYING
SITUATIONS!
PONY
30w 112
STALLION
60w 212
The Hubcap is a carefully designed,
patent pending, sound dispersion speaker
grill that disperses almost 180 degrees
worth of quality, full range sound.
There are many amps with multiple channels, but few sound good on every channel and even fewer sound good with
effects pedals. Finally, Visual Sound has designed a series of amps with just one great clean tube channel...
perfect for effects pedals. And just to prove our point, we’ll give you our #1 selling pedal, the Jekyll & Hyde,
absolutely FREE! That gives you a total of four great sounding channels!
; Revolutionary easy user-biasing on all models! 6L6 tubes(stock)
or switch to EL34 or similar without paying an amp tech
; Volume, Bass, Mid, Treble, & Reverb controls...5 knobs...simple!
; 9VDC output & cable for powering effects pedals
; Protection circuitry throughout the amplifier to
prevent failure of all critical components
; Celestion speakers in an all wood cabinet
; Hand wired controls and jacks
; Toroidal power transformer
FREE! JEKYLL & HYDE
ULTIMATE OVERDRIVE
PEDAL PLUS PADDED
COVER with POCKETS!
Pedal boards are for pedals...not power supplies.
Bigger is not always better. At a fraction of the cost, the 1 SPOT®is more powerful than
the PedalPower
**
or DC Brick**...and takes up NO space on your pedal board!
Frustrated with powering only two or three effects pedals with a 6-outlet power strip?
Visual Sound has created the perfect alternative to awkward transformer-type adapters. The 1 SPOT
®
9VDC regulated power supply will work with virtually any pedal on the market today. It can even
power many keyboards and other musical equipment. The 1 SPOT
®
features worldwide 100v-240v
input voltage allowing it to be used anywhere in the world! With 1700mA Output Power, the 1 SPOT
®
can power all of your pedals from a single outlet*with the use of Multi-Plug cables.
1SPOT® Combo
Pack Includes:
1SPOT
®
Power
Supply PLUS (1) MC8
Multi-Plug Cable, (2)
CBAT Battery Clip
Converters, (2) C35
3.5mm Converters,
and (1) L6 Line 6
Converter
Unlike most companies, Visual Sound puts a lot of thought into cheap accessories.
Believe it or not, the Multi-Plug 5 and 8 Cables are the only “daisy chain” cables featuring right angle plugs
and over 12” (300mm) between each plug. We even designed spring-loaded input socket contacts so your
MC5, MC8, or converter won’t unplug unless you want it to.
3.5mm Converter (C35)
Allows the 1 SPOT®adapter
and Multi-Plug Cable to be used
with any 9VDC pedal
*
with
a 3.5mm (1/8”) power jack
(E-H
**
, old MXR**, etc.)
L6 Converter (CL6)
Allows the 1 SPOT®adapter &
Multi-Plug Cable to be used with
Line 6
**
modeling pedals &
Digitech
**
RP100
Battery Clip Converter
(CBAT)
Allows the 1 SPOT®adapter &
Multi-Plug Cable to be used with
9V guitar pedals
*
that only have
a battery connection
Reverse Polarity
Converter (CYR)
Allows the 1 SPOT®adapter
to be used withYamaha
*
keyboards, samplers, and
drum machines
MULTI-PLUG 5 CABLE
(MC5)
Allows connection of up
to 5 units to the 1 SPOT
®
adapter...Connect cables
together to power even
more units
*
*Up to power rating of the
1 SPOT¤Adapter
MULTI-PLUG 8 CABLE
(MC8)
Allows connection of up
to 8 units to the 1 SPOT
®
adapter...Connect cables
together to power even
more units
*
*Up to power rating of the
1 SPOT¤Adapter
**Brand names listed are trademarks of their respective companies and have no affiliation with Visual Sound.
Loading...