Page 1
RdmSplitter
9-24V DC
500mA
(Terminal)
The widespread data protocol for lighting
equipment is DMX-512. It is a very successful
protocol with, however, a few limitations. The
maximum number of attached devices is
limited to 32 and they all have to be connected
in bus-topology having one cable running via
each device. Furthermore, a DMX cable should
not be longer than 300 meters.
The RdmSplitter from Visual Productions helps
tackle those inconvenient limitations. The
splitter takes a DMX signal and sends it out
again on its 6 DMX output ports allowing a
star-topology for efficient cable usage. Each
output port is capable of driving 32 more
devices. The splitter can also function as a
signal booster as each port supports another
300 meter long connection.
DATASHEET
104 (4.09)
mm (inch)
LED
105 (4.13)
NO POWER
POWER
RECEIVING DMX
RECEIVING RDM
The RdmSplitter features RDM compatibility.
The RDM protocol provides two-way communication over a DMX infrastructure. It enables
automatic addressing and allows fixtures to
provide status information back to the lighting
controller.
SPECIFICATIONS
DIN Rail mounting
DMX512-A (ANSI E1.11)
RDM (ANSI E1.20)
Screw terminals
6 Outputs
Optical Isolation (individual per port)
9-24V DC 500mA (PSU optional)
Operating temperature -20°C to
+50°C (-4°F to 122°F)
Compliance EN55103-1 EN55103-2
PINOUT
1 OUT1 +
2 OUT1 3 OUT1
4 OUT2 +
5 OUT2 6 OUT2
7 OUT3 +
8 OUT3 9 OUT3
10 OUT4 +
11 OUT4 12 OUT4
13 OUT5 +
14 OUT5 15 OUT5
16 OUT6 +
17 OUT6 18 OUT6
PINOUT
1 DC +
2 DC 3 INPUT +
4 INPUT 5 INPUT
6 THRU +
7 THRU 8 THRU
29.5 (1.16)
www.visualproductions.nl
© Copyright 2017 by Visual Productions BV
Loading...