VistaVision 82026-630 Operating Manual

Inverted Microscope
Model
82026-630
Operating Manual
- 1 -
Congratulations
Thank You for your purchase of a VWR VistaVision Microscope
This unit is a precision optical instrument. Our product has been design to provide the highest level of safety. However, improper operation or negligence in following the instructions in this manual may cause personal injuries and property losses. In order to ensure your safety, to maximize the life of this unit and to maintain it properly, please read through this manual carefully before operating this unit.
- 2 -
Safety Precautions & Reminder
1. Be sure to turn off the power switch and remove the power cord plug before installing this unit, replacing the bulb / fuse or plugging and unplugging the power supply unit. This is to prevent electric shock or getting fingers burnt.
2.Check unit voltage is in compliance with your local power supply voltage, otherwise contact your supplier. Improper input voltage may render unit not workable or a short circuit and damage the unit.
3.Use specified bulb, fuse and power cord which otherwise may damage the unit. Any extended power cord if used, must be grounded (PE).
4. Do not expose unit to high temperatures and dampness. Suitable operating environment is between 5°C to 35°C, and relative humidity of 20%-80% (at 25°C). Do not subject unit to direct sunlight.
5. Do not touch the halogen lamp box when using the unit as bulbs inside generate excess heat which can burn your hand. Do not handle bulb with bare hand within 1
0 minutes after switching off power
supply as bulb is still hot, especially when changing a defective bulb.
6. To prevent fire, do not place any fibrous product, paper, flammable or explosive material (e.g., gasoline, petroleum ether, alcohol) near the halogen lamp box .
7.When using coarse / fine focus knobs or height adjustment knob, do not continue to turn them beyond the limits or the internal mechanism can be damaged..
!
Warning!
!
Warning!
!
Warning!
!
Warning!
!
Warning!
!
Warning!
!
Warning!
- 3 -
Table of Contents
I. Characteristics and applications .................................................................................................. - 1 -
II. Structural features .............................................................................................................................- 1 -
III. Installation of this unit.....................................................................................................................- 2 -
IV. Technical specifications ....................................................................................................................- 4 -
V . Operation...............................................................................................................................................- 5 -
VI. Replacement of bulb and fuse......................................................................................................- 13 -
VII. Maintenance.....................................................................................................................................- 14 -
VIII. Troubleshooting.............................................................................................................................- 15 -
- 1 -
I. Characteristics and applications
The inverted microscope adopts an inverted structure that focuses by lifting or lowering the objectives, and is provided with long working distance plan objectives and Wide-field plan eyepieces. The long working distance condenser system can be placed into or out of the light path, and is suitable for tissue observation in a high culture dish. The phase contrast device can be attached to the light path to perform transmitted phase contrast microscopic observation. This unit is suitable for the microscopic observation of cells, tissues and clear liquid tissues, and the dynamic microscopic observation of tissues cultured in a culture dish, and is applicable to scientific research institutions, colleges and universities, medical and health, inspection and quarantine agencies, agricultural, animal husbandry and dairy industries.
II. Structural features
1 2 3 4
5
6
8 9
Fig.1
1. Eyepiece 2. Trinocular head 3. Phase contrast condenser 4. Halogen lamp box 5. Body
frame
6. Mechanical stage 7. Objective 8. Nosepiece 9. Coarse/fine focusing knob 10. Eyepiece tube
- 2 -
III. Installation
Caution
Before installing, be sure every components is clean, no score any parts or glass surface.
1
(2)
(2)
2
4
6
5
8
3
7
Fig. 2
Loading...
+ 14 hidden pages