Vista Acoustics C21 Product Information And Installation Manual
Product Overview
The C21 is a connecting block device for connecting IR receivers, IR emitters & a power supply.
The C21 may interface up to 4 A/V components depending on which emitters are selected in
the A/V system.
Product Features & Installation
1. IR Receiver Connection: Two separate connections are available for IR Receivers: Input 1:
Uses a 3.5 mm stereo jack; Input 2: Connect the IR system to the 3/position connector:
“V+ (12VDC), G (Ground) and IR (Signal)” P lease refer to the diagram below for proper connection.
2. Emitter Output: Select the appropriate EP11/11B Single or EP12/12B Dual emitters for
the installation. Up to 2 each of the dual emitters (EP12/12B) maximum can be connected
in parallel when using a “Y”.
3. Has one (1) IR emitter output jack, yet may be expanded to 2 outputs when using optional
“Y” Adaptor.
4. DC 12V power input receptacle with power ON green LED indicator.
5. Connect a Vista Acoustics power adaptor, a Regulated 12VDC/ 500mA output or higher to
appropriate AC outlet on the wall. Next insert the plug on the power adaptor to the jack
marked “Power DC 12V.
6. Once the LED turns green it will power all of the IR components connected in the system.
C21 2 IR Emitter Output Infared Connecting Block
With IR Receiver Connection
PRODUCT INFORMATION AND INSTALLATION GUIDE
In North America contact:
Trends Electronics International Inc. - 100 – 980 West 1st Street. North Vancouver, B.C. V7P 3N4
Phone: 1 (877) 946-9255 Fax: 1 (800) 618-7363 Email: orders@trendsinc.com
1
TUP
NI
2
T
UPN
I
E RE
TTIM
P REWO
V21
C
D
RI
G
+
V
A/V RECEIVER
BASS
TREBLE
BALANCE
VOLUME
TAPE 1
MONITOR
TAPE 2
VCR
LD
AUX
CD
PHONES
EXTRA
SPEAKERS
AM
FM
MONO
SEARCH
TUNE
PRESET
FM
STEREO
CENTER
TUNE
MODE STORE
TUNE
VIDEO
DVD PLAYER
DC12V
RS31.1
V+: BLACK WITH
GREY SOLID STRIPE
G: BLACK
BACK VIEW FOR
CODING & DEFINITION
IR: BLACK WITH GREY
DASHED STRIPE
REMOTE CONTROL
RT34.1
Loading...